pwcview and cheese - Device not configured / Invalid argument erros
Miguel C
miguelmclara at gmail.com
Tue Feb 23 23:58:48 UTC 2016
I just noticed the last messages were never CC'ed to the list
On Wed, Feb 10, 2016 at 8:56 PM, Otacílio <otacilio.neto at bsd.com.br> wrote:
> Miguel, I have noted that on my system, sometime I get a file not found
> error, like your problem. So, I unplugged the webcam and plug it again and
> it works. It is no frequently but occurs. Your camera is fixed or you can
> try something like this?
>
Nah its fixed :P
Its an acer ultrabook, the devices is conencted as a usb but its not like I
can plug it of unless I remove the LCD or something :P
I was jsut think that this might be driver related, which seems to be uvc:
% v4l2-dbg -D
Driver info:
Driver name : uvcvideo
Card type : 1.3M HD WebCam
Bus info : usb-/dev/usb-/dev/usb
Driver version: 2.6.38
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
maybe its a bug in the driver that presenting something unexpected to
/dev/video, I was just tried with ffpmeg, recompiled with v4l support and
get the same error using -i /dev/video
[video4linux2,v4l2 @ 0x80ac6f000] ioctl(VIDIOC_STREAMON): Device not
configured
/dev/video0: Device not configured
>
> []'s
> -Otacílio
>
>
> Em 10/02/2016 11:32, Miguel C escreveu:
>
>
>
> On Wed, Feb 10, 2016 at 2:32 PM, Miguel C <miguelmclara at gmail.com> wrote:
>
>>
>>
>> On Wed, Feb 10, 2016 at 2:05 PM, Otacílio < <otacilio.neto at bsd.com.br>
>> otacilio.neto at bsd.com.br> wrote:
>>
>>> I'm not a expert in this, but do you have recompiled webcamd enabling
>>> cuse(3) over multimedia/cuse4bsd-kmod?
>>>
>>
>> Actually ***you*** bring up a nice point I had it always compile with
>> defaults which means that it was already compiled for cuse no cuse4bsd-kmod
>> ...
>> Which makes all this even more confusing since the cuse module was not
>> loaded until now and cheese works :|
>>
>> Unless the option means "if checked" support both cuse and cuse4bsd,
>> depending on which one is loaded
>>
>>
>>> []'s
>>> -Otacílio
>>>
>>>
>>> Em 10/02/2016 10:59, Miguel C escreveu:
>>>
>>>
>>>> From your setup I noted that I'm not using cuse4bsd-kmod, but only cuse.
>>>>
>>>
>>> I tired to stop webcamd unoad cuse4bsd and load cuse, then start webcamd
>>> again and I get the same results.
>>>
>>>
>>>> [ota at nostromo /usr/home/ota]$ kldstat
>>>> Id Refs Address Size Name
>>>> 1 28 0xffffffff80200000 1e39ca8 kernel
>>>> 2 1 0xffffffff8203b000 e3b8 cuse.ko
>>>> 3 1 0xffffffff8204a000 3d90 pty.ko
>>>> 4 1 0xffffffff82221000 57b8 fdescfs.ko
>>>> 5 1 0xffffffff82227000 a3ac linprocfs.ko
>>>> 6 1 0xffffffff82232000 695a linux_common.ko
>>>> 7 1 0xffffffff82239000 26f8a vboxguest.ko
>>>> 8 1 0xffffffff82260000 7a9 vboxvideo.ko
>>>> 9 1 0xffffffff82261000 52092 drm2.ko
>>>> 10 1 0xffffffff822b4000 2679 iicbus.ko
>>>> 11 1 0xffffffff822b7000 1f6a imgact_binmisc.ko
>>>>
>>>>
>>>> [ota at nostromo /usr/home/ota]$ pkg info multimedia/webcamd
>>>> webcamd-4.2.0.9
>>>> Name : webcamd
>>>> Version : 4.2.0.9
>>>> Installed on : Thu Jan 14 17:09:41 2016 BRT
>>>> Origin : multimedia/webcamd
>>>> Architecture : freebsd:11:x86:64
>>>> Prefix : /usr/local
>>>> Categories : multimedia
>>>> Licenses : GPLv2
>>>> Maintainer : <hselasky at FreeBSD.org>hselasky at FreeBSD.org
>>>> WWW : <http://www.selasky.org/hans_petter/video4bsd/>
>>>> http://www.selasky.org/hans_petter/video4bsd/
>>>> Comment : Port of Linux USB webcam and DVB drivers into userspace
>>>> Options :
>>>> CUSE : on
>>>> DEBUG : off
>>>> DVB : off
>>>> HAL : on
>>>> INPUT : on
>>>> RADIO : on
>>>> VT_CLIENT : off
>>>> VT_SERVER : off
>>>> WEBCAM : on
>>>> Shared Libs required:
>>>> libdbus-1.so.3
>>>> libhal.so.1
>>>>
>>>>
>>>> I have used pwcview here and works fine, but I don't have tested with
>>>> skype.
>>>>
>>>> []'s
>>>> -Otacílio
>>>>
>>>
>>>
>>>
>>
>
>
More information about the freebsd-current
mailing list