11.0-CURRENT and Lenovo ThinkPad E540: No LAN, no WiFI
Guido Falsi
mad at madpilot.net
Thu Sep 18 08:17:16 UTC 2014
On 09/18/14 09:58, O. Hartmann wrote:
> Am Tue, 16 Sep 2014 08:40:25 -0700
> Adrian Chadd <adrian at freebsd.org> schrieb:
>
>> Ah, jumbo frames. Maybe you got lucky and some ethernet drivers
>> default to accepting larger frames even if the MTU is 1500.
>>
>>
>> -a
>
>
> After all, I managed to get the NIC up and running. But the culprit is that I have to
> take the NIC down and then up to make it working once the system has bootet. That is
> annoying. Lucckily, I can provide better informations since the box s now attached to the
> network. Here we go:
>
I have a similar situation with my nick on a tower system.
I need to change at least one flag on the card to have it working, I can
also just set the flag to the value it already has.
I'm using a small startup script which actually does this:
start_cmd="ifconfig ${refix_if} tso"
> LAN:
> re0 at pci0:4:0:0: class=0x020000 card=0x502817aa chip=0x816810ec rev=0x10 hdr=0x00
> vendor = 'Realtek Semiconductor Co., Ltd.'
> device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
> class = network
> subclass = ethernet
> bar [10] = type I/O Port, range 32, base 0x3000, size 256, enabled
> bar [18] = type Memory, range 64, base 0xf1d04000, size 4096, enabled
> bar [20] = type Memory, range 64, base 0xf1d00000, size 16384, enabled
> cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
> cap 05[50] = MSI supports 1 message, 64 bit
> cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
> speed 2.5(2.5) ASPM disabled(L0s/L1)
> cap 11[b0] = MSI-X supports 4 messages, enabled
> Table in map 0x20[0x0], PBA in map 0x20[0x800]
> cap 03[d0] = VPD
> ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
> ecap 0002[140] = VC 1 max VC0
> ecap 0003[160] = Serial 1 01000000684ce000
> ecap 0018[170] = LTR 1
> ecap 001e[178] = unknown 1
> PCI-e errors = Correctable Error Detected
> Corrected = Receiver Error
>
re0 at pci0:3:0:0: class=0x020000 card=0x11c01734 chip=0x816810ec rev=0x07
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd000, size 256, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xf2104000,
size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xf2100000,
size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 0100000004000001
PCI-e errors = Correctable Error Detected
Unsupported Request Detected
Corrected = Advisory Non-Fatal Error
it's similar hardware, same chip, different revision. I already reported
this on net@ but no patch could really solve the issue.
--
Guido Falsi <mad at madpilot.net>
More information about the freebsd-current
mailing list