r255873: ahcich7: Timeout on slot 0 port 0 FLOODING kernel messages
Sergey V. Dyatko
sergey.dyatko at gmail.com
Fri Sep 27 12:13:08 UTC 2013
On Fri, 27 Sep 2013 05:57:01 -0600
Scott Long <scottl at samsco.org> wrote:
>
> On Sep 27, 2013, at 5:52 AM, Sergey V. Dyatko
> <sergey.dyatko at gmail.com> wrote:
>
> >>>
> >>> yes, these messages disappeared after revert 255870 and r255871
> >>>
> >>
> >>
> >> Hi,
> >>
> >> Nothing that I changes should have affected the ahci driver. In
> >> fact, I tested this driver specifically during my development. Can
> >> you confirm that you built both kernel and modules from a clean
> >> state?
> >
> > [tiger at laptop]:/usr/src%svn st
> > M sys/boot/i386/zfsboot/zfsboot.c
> > [tiger at laptop]:/usr/src%svn diff
> > Index: sys/boot/i386/zfsboot/zfsboot.c
> > ===================================================================
> > --- sys/boot/i386/zfsboot/zfsboot.c (revision 255873)
> > +++ sys/boot/i386/zfsboot/zfsboot.c (working copy)
> > @@ -302,6 +302,7 @@
> > * region in the SMAP, use the last 3MB of 'extended' memory as
> > a
> > * high heap candidate.
> > */
> > + high_heap_size = 0;
> > if (bios_extmem >= HEAP_MIN && high_heap_size < HEAP_MIN) {
> > high_heap_size = HEAP_MIN;
> > high_heap_base = bios_extmem + 0x100000 - HEAP_MIN;
> > [tiger at laptop]:/usr/src%
> >
> > nothing more.
> >
>
> Yes, no local source changes, but are you loading the cam or ahci
> drivers a loadable modules that might be out of sync now, or did you
> use a short- cut for building your kernel, like NO_CLEAN?
>
my KERNCONF located here: http://svn.freebsd.by/files/b450.txt
my update procedure was:
# pwd
/usr/src
# svn up
Updating '.':
......
Updated to revision r255873.
# make -j2 buildworld
# make kernel
# mergemaster -p
# make installworld
# mergemaster -iF
# shutdown -r now
after revert (svn merge -c -255871; svn merge -c -255870) I do
# make -j2 buildkernel KERNFAST=1
installkernel & shutdown -r
> Thanks,
> Scott
>
--
wbr, tiger
More information about the freebsd-current
mailing list