X220 loses keyboard when Logitech USB wireless adaptor is unplugged

[Erich Dollansky]

Hi,

On Mon, 25 Mar 2013 15:26:54 +0100
Andreas Nilsson <andrnils at gmail.com> wrote:

> On Mon, Mar 25, 2013 at 3:24 PM, Erich Dollansky <
> erichsfreebsdlist at alogt.com> wrote:
> 
> 
> What does a 'usbconfig devlist' before and after unplugging show?
> 
do you mean this?

Before

 usbconfig dump_info
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)

ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)

ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)

ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)

ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)

ugen0.3: <Biometric Coprocessor UPEK> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (100mA)

ugen0.4: <Broadcom Bluetooth Device Broadcom Corp> at usbus0, cfg=0
md=HOST spd=FULL (12Mbps) pwr=ON (0mA)

ugen0.5: <Integrated Camera Chicony Electronics Co., Ltd.> at usbus0,
cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (200mA)

ugen1.2: <USB Receiver Logitech> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (98mA)


after:

ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)

ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)

ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)

ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)

ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)

ugen0.3: <Biometric Coprocessor UPEK> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (100mA)

ugen0.4: <Broadcom Bluetooth Device Broadcom Corp> at usbus0, cfg=0
md=HOST spd=FULL (12Mbps) pwr=ON (0mA)

ugen0.5: <Integrated Camera Chicony Electronics Co., Ltd.> at usbus0,
cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (200mA)

Erich