Using camcontrol on a Corsair CSSD-F120GB2

[Sevan / Venture37]

On 26/06/2013 17:08, Steven Hartland wrote:
> Try: camcontrol security ada0 -U user -s Erase -e Erase

camcontrol security ada0 -U user -s Erase -e Erase -v
camcontrol: sending ATA ATA_IDENTIFY with timeout of 30000 msecs
pass0: Raw identify data:
    0: 0040 3fff c837 0010 0000 0000 003f 0000
    8: 0000 0000 3130 3434 3635 3236 3332 3030
   16: 3039 3938 3033 3736 0000 0000 0004 312e
   24: 3120 2020 2020 436f 7273 6169 7220 4353
   32: 5344 2d46 3132 3047 4232 2020 2020 2020
   40: 2020 2020 2020 2020 2020 2020 2020 8010
   48: 0000 2f00 4000 0200 0200 0007 3fff 0010
   56: 003f fc10 00fb 0110 4bb0 0df9 0000 0007
   64: 0003 0078 0078 0078 0078 4000 0000 0000
   72: 0000 0000 0000 001f 0706 0000 004c 0044
   80: 01fc 0028 746b 7501 6163 706b b401 6163
   88: 407f 0000 0000 00fe 0000 0000 0000 0000
   96: 0000 0000 0000 0000 4bb0 0df9 0000 0000
  104: 0000 0001 4000 0000 5000 0000 0998 0376
  112: 0000 0000 0000 0000 0000 0000 0000 4014
  120: 4014 0000 0000 0000 0000 0000 0000 0000
  128: 0003 0000 0000 0000 0000 0000 0000 0000
  136: 0000 0000 0000 0000 0000 0000 0000 0000
  144: 0000 0000 0000 0000 0000 0000 0000 0000
  152: 0000 0000 0000 0000 0000 0000 0000 0000
  160: 0000 0000 0000 0000 0000 0000 0000 0000
  168: 0000 0001 0000 0000 0000 0000 0000 0000
  176: 0000 0000 0000 0000 0000 0000 0000 0000
  184: 0000 0000 0000 0000 0000 0000 0000 0000
  192: 0000 0000 0000 0000 0000 0000 0000 0000
  200: 0000 0000 0000 0000 0000 0000 003d 0000
  208: 0000 4000 0000 0000 0000 0000 0000 0000
  216: 0000 0001 0000 0000 0000 0000 1010 ffff
  224: 0000 0000 0000 0000 0000 0000 0000 0000
  232: 0000 0000 0000 0000 0000 0000 0000 0000
  240: 0000 0000 0000 0000 0000 0000 0000 0000
  248: 0000 0000 0000 0000 0000 0000 0000 16a5

pass0: <Corsair CSSD-F120GB2 1.1> ATA-8 SATA 2.x device
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

You are about to ERASE ALL DATA from the following device:
pass0,ada0: <Corsair CSSD-F120GB2 1.1> ATA-8 SATA 2.x device

Are you SURE you want to ERASE ALL DATA? (yes/no) yes
Issuing SECURITY_SET_PASSWORD password='Erase', user='user', mode='high'
camcontrol: sending ATA SECURITY_SET_PASSWORD with timeout of 15000 msecs
Issuing SECURITY_ERASE_PREPARE
camcontrol: sending ATA SECURITY_ERASE_PREPARE with timeout of 15000 msecs
Issuing SECURITY_ERASE_UNIT password='Erase', user='user'
camcontrol: sending ATA SECURITY_ERASE_UNIT with timeout of 7200000 msecs
camcontrol: ATA SECURITY_ERASE_UNIT failed: 0
(pass0:ahcich0:0:0:0): SECURITY_ERASE_UNIT. ACB: f4 00 00 00 00 40 00 00 
00 00 00 00
(pass0:ahcich0:0:0:0): CAM status: Command timeout

> firmware downloading is usually pretty specific so I'd
> expect you'll need to use the manufacturers tool for that.

ah, ok.


Sevan