r249939+ not detecting ata trim

[Steven Hartland]

----- Original Message ----- 
From: "matt" <sendtomatt at gmail.com>
>>
> Here are the delete methods:
> deleteflag: ATA_TRIM (2) = 1
> da4: Delete methods: <ATA_TRIM(*)>
> deleteflag: ATA_TRIM (2) = 1
> da3: Delete methods: <ATA_TRIM(*)>
> deleteflag: ATA_TRIM (2) = 1
> 
> Here is a truncated dmesg | fgrep mps
> mps0: <LSI SAS2008> port 0xb000-0xb0ff mem
> 0xfe83c000-0xfe83ffff,0xfe840000-0xfe87ffff irq 32 at device 0.0 on pci3
> mps0: Firmware: 15.00.00.00, Driver: 14.00.00.02-fbsd
> mps0: IOCCapabilities:
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> mps0: attempting to allocate 1 MSI-X vectors (15 supported)
> mps0: using IRQ 263 for MSI-X
> 
> My firmware is ahead of the driver, and the card itself is an IBM M1015
> cross-flashed to what is supposedly identical to a 9210-8i.

Hmmm that's unexpected, it could be a FW change, but I'll get an mps box
updated to current tomorrow and do some digging.

    Regards
    Steve

================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. 

In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337
or return the E.mail to postmaster at multiplay.co.uk.