Supermicro 6027R-N3RF+head, usb trouble

[Sergey V. Dyatko]

On Mon, 22 Apr 2013 08:10:47 +0200
Hans Petter Selasky <hps at bitfrost.no> wrote:

> On 04/21/13 21:38, Sergey V. Dyatko wrote:
> > Hi,
> >
> > Can anybody explain why USB keyboard (and keyboard from
> > integrated IPKVM) doesn't work when I boot with   'C606
> > chipset Dual 4-Port SATA/SAS Storage Control Unit' enabled in bios?
> > Also I can't boot that box from usb memstick and
> > FreeBSD-10.0-CURRENT-amd64-20130413-r249439-release.iso They both
> > loose(?) device and can't find root If I disable controller in bios
> > system can't see any sata hdd connected to it:(
> > booting with hw.usb.ehci.no_hs=1, kern.cam.boot_delay="10000"
> > and debug.acpi.disabled="hostres" without success. I setup dhcpd,
> > tftp, nfs on my laptop and finally I install fbsd on that box, but
> > question with kbd is open - It doesn't work..
> > dmesg:
> > http://svn.freebsd.by/files/dmesg_N3RF.txt
> > pciconf -lv:
> > http://svn.freebsd.by/files/pciconf_N3RF.txt
> >
> > I would appreciate any hints
> >
> 
> Hi,
> 
> This indicates a LOW memory problem, or unability to grab contiguous 
> memory for USB controller drivers:
> 
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored)
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored)
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> usbd_ctrl_transfer_setup: could not setup default USB transfer
> 
> That's why USB doesn't work. Try to figure out who is using all that
> memory.
> 

Hi, how I can do that ?

> --HPS



-- 
wbr, tiger