Atheros 9287 - no carrier . revision 249623.

[Adrian Chadd]

Ok, the relevant / interesting bit:s. John, any ideas?

HEAD:

pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 3 (0xe0500000-0xe05fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     10
pcib2:   subordinate bus   10
pcib2:   memory decode     0xe0500000-0xe05fffff
pcib2:   no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
found->	vendor=0x168c, dev=0x002e, revid=0x01
	domain=0, bus=10, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10

^---------- notice how this is irq 10

	powerspec 3  supports D0 D1 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xe0500000, size 16, enabled
pcib2: allocated memory range (0xe0500000-0xe050ffff) for rid 10 of pci0:10:0:0
pcib2: matched entry for 10.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
ath0: <Atheros 9287> mem 0xe0500000-0xe050ffff irq 18 at device 0.0 on pci10
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 60
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search

versus

pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 3 (0xe0500000-0xe05fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     10
pcib2:   subordinate bus   10
pcib2:   memory decode     0xe0500000-0xe05fffff
pcib2:   no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
found->	vendor=0x168c, dev=0x002e, revid=0x01
	domain=0, bus=10, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7

^------ notice this is irq 7

	powerspec 3  supports D0 D1 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xe0500000, size 16, enabled
pcib2: allocated memory range (0xe0500000-0xe050ffff) for rid 10 of pci0:10:0:0
pcib2: matched entry for 10.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
ath0: <Atheros 9287> mem 0xe0500000-0xe050ffff irq 18 at device 0.0 on pci10
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 60
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search