USB Flash drive problem with 9.0

[Kaho Toshikazu]

  Hello Alexander Motin,

> Could you collect more information about what's exactly happens
> with the device? Can you execute some camcontrol inquiry or
> camcontrol readcap commands after kernel misdetected size with
> "READ CAPACITY(16)"?
> 
> If yes (device is still alive), could you run these commands
> (with proper device name) and send me the output files:
> camcontrol cmd da0 -E -v -c "12 00 00 00 80 00" -i 128 - > INQ.res
> camcontrol cmd da0 -E -v -c "9e 10 00 00 00 00 00 00 00 00 00 00
> 00 20 00 00" -i 32 - > RC16.result

usbconfig -d 0.3 dump_device_desc

ugen0.3: <Mass Storage Device JetFlash> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0000 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x8564 
  idProduct = 0x1000 
  bcdDevice = 0x1100 
  iManufacturer = 0x0001  <JetFlash>
  iProduct = 0x0002  <Mass Storage Device>
  iSerialNumber = 0x0003  <83CA7S8M3LD8UGSF>
  bNumConfigurations = 0x0001 

-- dmesg without any quirks --
ugen0.3: <JetFlash> at usbus0
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus0
da0 at umass-sim0 bus 0 scbus11 target 0 lun 0
da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI-4 device 
da0: 40.000MB/s transfers
da0: 17454747090944MB (71776119061217281 512 byte sectors: 64H 32S/T 0C)

hexdump -Cv RC16.result
00000000  00 ff 00 00 00 00 00 00  00 00 02 00 00 00 00 00  |................|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020

`hexdump -Cv INQ.res`
00000000  00 80 04 02 1f 73 6d 69  4a 65 74 46 6c 61 73 68  |.....smiJetFlash|
00000010  54 72 61 6e 73 63 65 6e  64 20 31 36 47 42 20 20  |Transcend 16GB  |
00000020  31 31 30 30 00 80 02 00  00 00 00 00 00 00 00 00  |1100............|
00000030  00 00 00 00 00 00 28 00  03 01 82 06 00 3f 00 00  |......(......?..|
00000040  00 00 28 32 00 00 00 00  00 00 00 50 50 00 00 00  |..(2.......PP...|
00000050  30 50 50 00 00 00 00 00  00 00 00 21 84 84 21 1e  |0PP........!..!.|
00000060  00 03 48 00 00 c0 00 00  00 00 00 00 00 00 00 00  |..H.. at ..........|
00000070  00 00 00 00 00 00 01 00  24 15 01 09 00 00 00 00  |........$.......|
00000080

-- dmesg with UQ_MSC_NO_INQUIRY --  
ugen0.3: <JetFlash> at usbus0
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus0
da0 at umass-sim0 bus 0 scbus11 target 0 lun 0
da0: <  > Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 15477MB (31696896 512 byte sectors: 255H 63S/T 1973C)


  Hmm, "READ CAPACITY(16)" can be used and device is alive.
With UQ_MSC_NO_INQUIRY, after run camcontrol, dd can read normally.
Without UQ_MSC_NO_INQUIRY, camcontrol can return something,
but dd can not be usable.

--
Kaho Toshikazu