[CFR]RT305xF support, w/o attachment

[Sergey V. Dyatko]

On Sun, 20 Mar 2011 23:31:51 +0800
Adrian Chadd <adrian at freebsd.org> wrote:

> Hi all,
> 

Hi, Adrian

> I plan on tidying up the initial support patch (removing some of the
> stuff that snuck in from the ethernet, switch and wifi parts) and
> committing this sometime in the next week or so.
> 
> I don't (yet) have hardware to test it myself. I'll just do a compile
> run and try to make sure it hasn't broken anything.
> 
> I'll then take responsibility in case it breaks anything else in the
> build. Aleksandr will take responsibility for fixing bugs. :)
> 
> Thankyou for your hard work Aleksandr!
> 

Last patch from Aleksandr 'works fine for me', so... may be rt2860
should be replaced to 'rt' for example ?
rt0: flags= blah-blah-blah IHMO looks more .....nice(?) than
rt28600: flags=


> 
> Adrian
> 
> On 14 March 2011 22:29, Aleksandr Rybalko <ray at dlink.ua> wrote:
> 
> >
> > Hello, all.
> >
> > I am pleased to present support for Ralink RT3050F/RT3052F MIPS
> > SoC's for FreeBSD.
> >
> > This patches add support of
> > 1. GPIO/Interrupt/System/UART controllers + internal bus
> >        http://my.ddteam.net/files/2011-03-14_RT305xF_support.patch
> > 2. RT305xF embedded ethernet controller
> >        http://my.ddteam.net/files/2011-03-14_RT305xF_ether_support.patch
> > 3. RT2860 802.11n controller authors Damien Bergamini and Alexander
> > Egorenkov
> >        http://my.ddteam.net/files/2011-03-14_rt2860.patch
> >        only modification to work with RT2872 (embedded to
> > RT305[02]F) wrote by me.
> >
> > Also supported DWC like USB OTG controller, not included now,
> > because have many issues:
> > 1. Don't support SPIT transactions (FS device on HS Hub) yet.
> > 2. Don't support ISOC transactions yet.
> > 3. And have problems with some devices, possibly timing problem.
> > You can found it at
> > http://my.ddteam.net/hg/BASE/file/dd632189c3a0/head/sys/dev/usb/controller/
> > files dotg*
> >
> >
> > Also supported internal switch, not included now, because this part
> > of not done Switch API project.
> > You can found it at
> > http://my.ddteam.net/hg/BASE/file/dd632189c3a0/head/sys/dev/switch/
> >
> > Remaining issues:
> >        RT2860 support only Open(no crypto) mode for RT305[02]F
> >
> > Comments are welcome.
> > Want to know, what I do right or what wrong :)
> >
> > --
> > Alexandr Rybalko <ray at dlink.ua>
> > aka Alex RAY <ray at ddteam.net>

-- 
wbr, tiger