two issues after upgrading to a more up-to-date HEAD

[Alexander Best]

On Thu Jun 16 11, Alexander Best wrote:
> hi there,

i reverted my kernel back to r222890. everything works fine now and both issues
i mentioned below dissapeared.

i also discovered another issue with the more recent kernel:

i was getting errno -128 with a lot of apps. but only the first time i ran
them. e.g. with git:

1) -128
2) OK
3) -128
4) OK
5) ...

the same with stuff like ./configure or ee(1). first time failures while
running or saving; second time it works.

this as well was fixed by reverting back to r222890.

cheers.
alex

> 
> i'm running HEAD on amd64. yesterday i updated my kernel to r223109. i'm now
> seeing two issues, which weren't there beforehand:
> 
> 1)
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 238474MB (488395055 512 byte sectors: 16H 63S/T 16383C)
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <SAMSUNG HD103SJ 1AJ10001> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
> xpt_action_default: CCB type 0xe not supported
> xpt_action_default: CCB type 0xe not supported
> xpt_action_default: CCB type 0xe not supported
> cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GH24NS50 XP02> Removable CD-ROM SCSI-0 device 
> SMP: AP CPU #1 Launched!
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
> cd0: cd present [2291664 x 2048 byte records]
> 
> ^^ i suspect the xpt_action_default messages have been introduced by the recent
> CAM changes. they appear to be harmless though.
> 
> 2)
> dumpon: ioctl(DIOCSKERNELDUMP): Device not configured
> /etc/rc: WARNING: unable to specify /dev/label/swapfs as a dump device
> 
> /dev/label/swapfs is a perfect swap partition and worked without any problems
> beforehand. specifying the device node instead of the label makes no
> difference:
> 
> taku% dumpon /dev/ada1p1
> dumpon: ioctl(DIOCSKERNELDUMP): Device not configured
> otaku% gpart show
> =>       34  488394988  ada0  GPT  (232G)
>          34        128     1  freebsd-boot  (64k)
>         162   16777216        - free -  (8.0G)
>    16777378  471617644     3  freebsd-ufs  (224G)
> 
> =>        34  1953525101  ada1  GPT  (931G)
>           34    20971520     1  freebsd-swap  (10G)
>     20971554     4194304     2  freebsd-ufs  (2.0G)
>     25165858  1928359277     3  freebsd-ufs  (919G)
> 
> otaku% glabel status
>                                       Name  Status  Components
>                                 label/boot     N/A  ada0p1
> gptid/e52df583-e446-11de-bb92-000fb58207c8     N/A  ada0p1
>                                 ufs/rootfs     N/A  ada0p3
>                               label/swapfs     N/A  ada1p1
>                                  ufs/varfs     N/A  ada1p2
>                                  ufs/usrfs     N/A  ada1p3
>      iso9660/Futurama Season 6 Ep 1-8 720p     N/A  cd0
> 
> cheers.
> alex
> 
> -- 
> a13x

-- 
a13x