Optiarc DVD-ROM not recognized with ATA_CAM

[Alexander Motin]

On 12.08.2011 22:33, Alexander Burchell wrote:
> I'm not being able to get my DVD-ROM recognized under 9-current,
> although I used the 8.2-release DVD to install FreeBSD (and then
> subsequently upgraded the system to the "head" version via svn-freebsd).
>
> 1) There is no /dev/*cd* ANYTHING at any time.
>
> NOTE: I'm using a kernel (built with clang) using the ATA_CAM option so
> I presume my DVD would be "/dev/acd0".
>
> 2) There is no indication in the boot log that the drive is probed. The
> drive light does not flash (not sure if they even do that anymore),
> however, after having moved it to another controller (AHCI SATA-3) I
> sometimes get a log such as this:
>
> ahcich1: Timeout on slot 0 port 0
> ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr
> 00000000
> run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
> ahcich1: Timeout on slot 0 port 0
> ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr
> 00000000
>
> It is an "Optiarc DVD RW AD-7190S". I believe it's at microcode 1.01 and
> there is 1.03 available at manufacturer site however that leads me to:

Could you send me full verbose (boot -v) dmesgs with drive connected to 
both chipset and Marvell controllers?

-- 
Alexander Motin