Safe-mode on amd64 broken
Alexander Motin
mav at FreeBSD.org
Thu Sep 30 05:23:53 UTC 2010
David Naylor wrote:
> On Wednesday 29 September 2010 18:25:13 Alexander Motin wrote:
>> David Naylor wrote:
>>> On Wednesday 29 September 2010 16:19:08 Andriy Gapon wrote:
>>>> What do you try to actually achieve?
>>> I was trying to boot a system and it was panicking due to stray
>>> interrupts. It turned out to be caused by HPET. I found
>>> `hint.hpet.0.clock=0' which fixed the problem.
>>>
>>> This means HPET does not work on any of my machines. The other one's
>>> symptoms are hda losing interrupts after a period of up-time.
>> What chipset do you use? Nvidia MCP5x? Could you send me your verbose
>> dmesg?
>
> Yes, the one is a MCP51, the other is a ICH8M.
>
> The desktop is a Gigabyte N650SLI-DS4L. Its symptom is hda losing interrupts
> after a period of time.
There are too many reports about different lost interrupts problems on
different controllers of MCP5x. I don't know the reason. Attached patch
should disable using regular HPET interrupts on NVidia chipsets. I hope
it will work as workaround. May be it is too aggressive, but better to
be safe then sorry. I assume that legacy_route mode may still work fine
there. It would be nice to test it.
> The laptop is a Acer 2920. Its symptom for a GENERIC is a panic saying stray
> interrupt (irq7), with a custom kernel booting stalls.
This is strange, as my Acer with the same ICH8M works fine in all
possible modes. Also IMHO stray interrupts are not a reason to panic.
Could you show what it looks like?
--
Alexander Motin
-------------- next part --------------
--- acpi_hpet.c.prev 2010-09-13 10:25:36.000000000 +0300
+++ acpi_hpet.c 2010-09-30 08:09:34.000000000 +0300
@@ -58,6 +58,7 @@ __FBSDID("$FreeBSD: head/sys/dev/acpica/
#define HPET_VENDID_AMD 0x4353
#define HPET_VENDID_INTEL 0x8086
+#define HPET_VENDID_NVIDIA 0x10de
ACPI_SERIAL_DECL(hpet, "ACPI HPET support");
@@ -492,6 +493,12 @@ hpet_attach(device_t dev)
if (vendor == HPET_VENDID_AMD)
sc->allowed_irqs = 0x00000000;
/*
+ * NVidia MCP5x chipsets have number of unexplained interrupt
+ * problems. For some reason, using HPET interrupts breaks HDA sound.
+ */
+ if (vendor == HPET_VENDID_NVIDIA && rev <= 0x01)
+ sc->allowed_irqs = 0x00000000;
+ /*
* Neither QEMU nor VirtualBox report supported IRQs correctly.
* The only way to use HPET there is to specify IRQs manually
* and/or use legacy_route. Legacy_route mode work on both.
More information about the freebsd-current
mailing list