Broadcom BCM4310 USB Controller (Wifi)

[Matthias Apitz]

El día Thursday, October 28, 2010 a las 12:07:10PM +0000, Paul B Mahol escribió:

> > # ifconfig ndis0 192.168.2.200
> >
> > All this is with a 8-CURRENT kernel/system as of May 2009. I will now build
> > a
> > USB key from HEAD and will continue testing.
> >
> 
> On 9/8 CURRENT you create wlanX with ifconfig(8) and operate on them.
> 
> But note that such old CURRENT have few bugs in NDISulator.
> 
> For example scan results are incomplete and scanning can trigger panic
> in some situations.
> If you use wpa_supplicant -Dndis you will never encounter such problems.

I booted the 8-CURRENT this morning, loaded the module with kldload(8) and
wlan0 came up by its own (I did not realized this yesterday). I have in
rc.conf:

wlans_ndis0="wlan0"
ifconfig_wlan0="WPA DHCP"

wpa_supplicant(8) started after kldload, and associated the 
interface with my AP; had to do the DHCP by hand, don't know why?

For the moment all seems to be fine. Thanks for guiding me through this
to all.

	matthias

-- 
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <guru at unixarea.de> - w http://www.unixarea.de/