CALL for TEST [HOSTAP] run(4) ralink usb wireless

[Ganbold]

PseudoCylon wrote:
> ----- Original Message ----
>   
>> From: PseudoCylon <moonlightakkiy at yahoo.ca>
>> To: Ganbold Tsagaankhuu <ganbold at mobicom.mn>
>> Cc: Ganbold <ganbold at gmail.com>; freebsd-current at freebsd.org
>> Sent: Tue, July 6, 2010 12:26:58 AM
>> Subject: Re: CALL for TEST [HOSTAP] run(4) ralink usb wireless
>>
>>     
>>>>>>>> From: Ganbold <ganbold at gmail.com>
>>>>>>>>  To: PseudoCylon <moonlightakkiy at yahoo.ca>
>>>>>>>>  Cc: freebsd-current at freebsd.org;  Ganbold Tsagaankhuu 
>>>>>>>>                 
>> <ganbold at mobicom.mn>
>>     
>>>>>>>>  Sent: Wed, June 16, 2010 6:33:47 AM
>>>>>>>> Subject: Re:  CALL for TEST [HOSTAP] run(4) ralink usb  wireless
>>>>>>>>
>>>>>>>>  AK-san,
>>>>>>>>      
>>>>>>>>          
>>>>>>>>                 
>>>>>>> PseudoCylon wrote:
>>>>>>>    
>>>>>>> Strange,  looks like this time works as expected,  but sometimes it
>>>>>>> doesn't   work.
>>>>>>>
>>>>>>> In some cases it doesn't  work and you can find complete tcpdump  output
>>>>>>> from  very beginning to the modem  hang:
>>>>>>>
>>>>>>>    
>>>>>>>        
>>>>>>>               
>>>>>>  Hello,
>>>>>>
>>>>>> Are following  true?
>>>>>> When manually load/reload hostapd,  works
>>>>>> When loaded by rc.conf, doesn't  work
>>>>>>
>>>>>> If so, please try attached patch.  (patch to if_run.c only) Or, here is a 
>>>>>>             
>> patched file.
>>     
>>>>>> http://gitorious.org/run/run/blobs/raw/cmdq_fix/dev/usb/wlan/if_run.c
>>>>>>
>>>>>>  When auto-loading, the driver is brought up and down a few times. It 
>>>>>>             
>> might be  the cause.
>>     
>>>>>>      
>>>>>>             
>>>>> I will test  it few more days and let you know.
>>>>>
>>>>>  thanks,
>>>>>
>>>>> Ganbold
>>>>>    
>>>>>           
>>>> Hello,
>>>>
>>>> How is the patch doing on your  rspro? Is it working well?
>>>>  
>>>>         
>>> Sorry for late  response. Due to business trip I tested couple of times
>>> only and it seems  working relatively ok. 1-2 times ADSL modem hang, but
>>> seemed like after  3-4 hours.
>>> Tried couple of times again, but I couldn't reproduce it. I  will try to
>>> reproduce it and let you know the  results.
>>>
>>> thanks a  lot,
>>>
>>> Ganbold
>>>       
> Hello, Ganbold
>
> Is the latest patch working?
>   

AK-san,

Only tested once, the patch works ok so far.

thanks,

Ganbold

>
> AK
>
>   
>> Hello,
>>
>> I say every one has a  job.
>>
>> At least it's start up OK, right?
>>
>> Can you try attached patch?  (patch to if_run.c you currently using) Or, here 
>> is a patched file
>> http://gitorious.org/run/run/blobs/raw/cmdq_fix/dev/usb/wlan/if_run.c
>>
>> I  encountered similar problem about 5 days ago. It kind of hard to reproduce. 
>> A  couple of things have to happen at the right (or wrong) time.
>>
>> If the  modem still hangs at the start up, please let me know. That means the 
>> last patch  isn't working.
>>
>> AK
>>
>> -- begin patch --
>>
>> diff --git  a/dev/usb/wlan/if_run.c b/dev/usb/wlan/if_run.c
>> index f302246..e5a2a4d  100644
>> --- a/dev/usb/wlan/if_run.c
>> +++ b/dev/usb/wlan/if_run.c
>> @@  -888,8 +888,7 @@ run_cmdq_cb(void *arg, int pending)
>>
>>  /* call  cmdq[].func locked */
>>  RUN_LOCK(sc);
>> -for(i = sc->cmdq_exec;  sc->cmdq[i].func && pending;
>> -    i = sc->cmdq_exec,  pending--){
>> +for(i = sc->cmdq_exec; sc->cmdq[i].func; i =  sc->cmdq_exec){
>>  DPRINTFN(6, "cmdq_exec=%d pending=%d\n", i, pending);
>>   if(sc->cmdq_run == RUN_CMDQ_GO ||
>>      (sc->cmdq_key_set ==  RUN_CMDQ_GO &&
>>
>> -- end patch --
>>
>>
>>
>>
>>     
>
>
>
>   


-- 
My interest is in the future because I am going to spend the rest of my
life there.