ITE8213 CD not detected in 8

[Randy Bush]

>>> I have a cd that isn't detected in 8 with ACPI enabled, and it is
>>> detected with ACPI disabled (but other problems occur when I do so).
>> aha!  i think what i saw was
>> no acd with acpi
>> no sata without it
>> very current am64
> What PCI bus is the device on when its detected? Mine is on pci17. 
> Maybe there is some limit? None of my bus17 devices are detected.

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Wed Feb 25 07:01:38 UTC 2009
    root at psg2-ng.psg.com:/usr/obj/usr/src/sys/PSG2
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E3110  @ 3.00GHz (2992.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
  Cores per package: 2
usable memory = 4285526016 (4086 MB)
avail memory  = 4122759168 (3931 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
acpi0: <SHIMAS SDS-ONE> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x203f mem 0xd8080000-0xd809ffff,0xd8000000-0xd803ffff irq 24 at device 2.0 on pci2
em0: [FILTER]
em0: Ethernet address: 00:1b:21:28:e2:44
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2040-0x207f mem 0xd80a0000-0xd80bffff,0xd8040000-0xd807ffff irq 25 at device 2.1 on pci2
em1: [FILTER]
em1: Ethernet address: 00:1b:21:28:e2:45
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8701000-0xd87013ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
em2: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem 0xd8200000-0xd821ffff irq 16 at device 0.0 on pci13
em2: Using MSI interrupt
em2: [FILTER]
em2: Ethernet address: 00:30:48:d4:a3:0a
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci15: <ACPI PCI bus> on pcib5
em3: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x4000-0x401f mem 0xd8300000-0xd831ffff irq 17 at device 0.0 on pci15
em3: Using MSI interrupt
em3: [FILTER]
em3: Ethernet address: 00:30:48:d4:a3:0b
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003b
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8701400-0xd87017ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c10-0x1c1f,0x1c00-0x1c0f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH9 SATA300 controller> port 0x1c68-0x1c6f,0x1c5c-0x1c5f,0x1c60-0x1c67,0x1c58-0x1c5b,0x1c30-0x1c3f,0x1c20-0x1c2f irq 18 at device 31.5 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <dasp> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad0: 238475MB <Seagate ST3250310NS SN05> at ata0-master SATA150
ad2: 238475MB <Seagate ST3250310NS SN05> at ata1-master SATA150
SMP: AP CPU #1 Launched!
ugen7.1: <Intel> at usbus7
ushub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen1.1: <Intel> at usbus1
ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen5.1: <Intel> at usbus5
ushub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
ushub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen0.1: <Intel> at usbus0
ushub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
ushub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
ushub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
GEOM: ad2s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
ushub2: 2 ports with 2 removable, self powered
ushub5: 2 ports with 2 removable, self powered
ushub3: 2 ports with 2 removable, self powered
ushub1: 2 ports with 2 removable, self powered
ushub7: 2 ports with 2 removable, self powered
ushub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus4 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
ushub6: 6 ports with 6 removable, self powered
ushub0: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/mirror/gm0s1a
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled