ums no longer loads on CURRENT

[M. Warner Losh]

In message: <CB26D07A-6D29-4B53-B3F1-CD1CAB8AF899 at gmail.com>
            Garrett Cooper <yanefbsd at gmail.com> writes:
: Recently built kernel as of today around 4pm. The mouse is available  
: on the console and moused isn't running; this issue prevents me from  
: using X11. I'm looking for all libraries linked against libusb-0.1.so. 
: 8 right now...

Did you read updating?

Warner

: More details:
: 
: [root at orangebox /usr/home/gcooper]# kldload ums
: module_register: module ushub/ums already exists!
: Module ushub/ums failed to register: 17
: kldload: can't load ums: File exists
: 
: [root at orangebox /usr/home/gcooper]# cat /root/ORANGEBOX-common /root/ 
: ORANGEBOX
: # START COMMON INCLUDE FILE
: 
: cpu		I686_CPU
: ident		ORANGEBOX
: 
: # To statically compile in device wiring instead of /boot/device.hints
: #hints		"GENERIC.hints"		# Default places to look for devices.
: 
: makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
: 
: options 	SCHED_ULE		# ULE scheduler
: options 	PREEMPTION		# Enable kernel thread preemption
: options 	INET			# InterNETworking
: #options 	INET6			# IPv6 communications protocols
: options 	SCTP			# Stream Control Transmission Protocol
: options 	FFS			# Berkeley Fast Filesystem
: options 	SOFTUPDATES		# Enable FFS soft updates support
: options 	UFS_ACL			# Support for access control lists
: options 	UFS_DIRHASH		# Improve performance on big directories
: options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
: options 	MD_ROOT			# MD is a potential root device
: options 	NFSCLIENT		# Network Filesystem Client
: options 	NFSSERVER		# Network Filesystem Server
: options 	NFSLOCKD		# Network Lock Manager
: options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
: options 	NTFS			# NT File System
: options 	MSDOSFS			# MSDOS Filesystem
: options 	CD9660			# ISO 9660 Filesystem
: options 	PROCFS			# Process filesystem (requires PSEUDOFS)
: options 	PSEUDOFS		# Pseudo-filesystem framework
: options		GEOM_BSD
: options		GEOM_MBR
: options 	GEOM_PART_GPT		# GUID Partition Tables.
: options 	GEOM_LABEL		# Provides labelization
: options 	COMPAT_43TTY		# BSD 4.3 TTY compat [KEEP THIS!]
: options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
: options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
: options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
: options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
: options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
: options 	KTRACE			# ktrace(1) support
: options 	STACK			# stack(9) support
: options 	SYSVSHM			# SYSV-style shared memory
: options 	SYSVMSG			# SYSV-style message queues
: options 	SYSVSEM			# SYSV-style semaphores
: options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time  
: extensions
: options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
: options 	STOP_NMI		# Stop CPUS using NMI instead of IPI
: options 	AUDIT			# Security event auditing
: options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
: 
: # Debugging for use in -current
: options 	KDB			# Enable kernel debugger support.
: options		KDB_UNATTENDED		# I don't want to be here when shit crashes..
: options 	DDB			# Support DDB.
: options 	GDB			# Support remote GDB.
: options 	INVARIANTS		# Enable calls of extra sanity checking
: options 	INVARIANT_SUPPORT	# Extra sanity checks of internal  
: structures, required by INVARIANTS
: #options 	WITNESS			# Enable checks to detect deadlocks and cycles
: #options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
: options		COMPAT_LINUX
: 
: # Make an SMP-capable kernel by default
: options 	SMP			# Symmetric MultiProcessor Kernel
: 
: device		apic
: 
: # CPU frequency control
: device		cpufreq
: 
: # Bus support.
: device		acpi
: device		pci
: 
: # ATA and ATAPI devices
: device		ata
: device		atadisk		# ATA disk drives
: device		atapicam	# Required for [C|DV]D burning
: #device		ataraid		# ATA RAID drives
: device		atapicd		# ATAPI CDROM drives
: #device		atapist		# ATAPI tape drives
: options 	ATA_STATIC_ID	# Static device numbering
: 
: # SCSI peripherals
: device		scbus		# SCSI bus (required for SCSI)
: device		ch		# SCSI media changers
: device		da		# Direct Access (disks)
: device		cd		# CD
: device		pass		# Passthrough device (direct SCSI access)
: 
: # atkbdc0 controls both the keyboard and the PS/2 mouse
: device		atkbdc		# AT keyboard controller
: device		atkbd		# AT keyboard
: device		psm		# PS/2 mouse
: 
: device		kbdmux		# keyboard multiplexer
: 
: device		vga		# VGA video card driver
: 
: device		splash		# Splash screen and screen saver support
: 
: # syscons is the default console driver, resembling an SCO console
: device		sc
: 
: device		agp		# support several AGP chipsets
: 
: # Serial (COM) ports
: device		uart		# Generic UART driver
: 
: # If you've got a "dumb" serial or parallel PCI card that is
: # supported by the puc(4) glue driver, uncomment the following
: # line to enable it (connects to sio, uart and/or ppc drivers):
: #device		sio
: 
: # PCI Ethernet NICs.
: device		em		# Intel PRO/1000 Gigabit Ethernet Family
: 
: # PCI Ethernet NICs that use the common MII bus controller code.
: # NOTE: Be sure to keep the 'device miibus' line in order to use these  
: NICs!
: device		miibus		# MII bus support
: device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
: 
: # Pseudo devices.
: device		loop		# Network loopback
: device		random		# Entropy device
: device		ether		# Ethernet support
: device		tun		# Packet tunnel.
: device		pty		# Pseudo-ttys (telnet etc)
: device		md		# Memory "disks"
: #device		gif		# IPv6 and IPv4 tunneling
: #device		faith		# IPv6-to-IPv4 relaying (translation)
: device		firmware	# firmware assist module
: 
: # The `bpf' device enables the Berkeley Packet Filter.
: # Be aware of the administrative consequences of enabling this!
: # Note that 'bpf' is required for DHCP.
: device		bpf		# Berkeley packet filter
: 
: # FireWire support
: device		firewire	# FireWire bus code
: device		sbp		# SCSI over FireWire (Requires scbus and da)
: device		dcons
: 
: device		sound
: device		snd_emu10kx
: 
: # END COMMON INCLUDE FILE
: include	"ORANGEBOX-common"
: 
: # USB support
: device		uhci		# UHCI PCI->USB interface
: device		ohci		# OHCI PCI->USB interface
: device		ehci		# EHCI PCI->USB interface (USB 2.0)
: device		usb		# USB Bus (required)
: #device		udbp		# USB Double Bulk Pipe devices
: device		uhid		# "Human Interface Devices"
: device		ukbd		# Keyboard
: device		ulpt		# Printer
: device		umass		# Disks/Mass storage - Requires scbus and da
: device		ums		# Mouse
: #device		uscanner	# Scanners
: 
: # USB <-> RS232 adapter.
: device		uplcom
: device		ucom
: 
: [root at orangebox /usr/home/gcooper]# uname -a
: FreeBSD orangebox.gateway.2wire.net 8.0-CURRENT FreeBSD 8.0-CURRENT  
: #2: Sun Mar  1 16:42:18 PST 2009     root at orangebox.gateway.2wire.net:/ 
: usr/obj/usr/src/sys/ORANGEBOX  i386
: _______________________________________________
: freebsd-usb at freebsd.org mailing list
: http://lists.freebsd.org/mailman/listinfo/freebsd-usb
: To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"
: 
: