SiI3124/3132/3531 CAM driver

[Greg Kerr]

> pciconf -lbcv

atapci0 at pci0:2:0:0:     class=0x018000 card=0x31321095 chip=0x31321095  
rev=0x01 hdr=0x00
     vendor     = 'Silicon Image Inc (Was: CMD Technology Inc)'
     device     = 'PCI Express (1x) to 2 Port SATA300 (SiI 3132)'
     class      = mass storage
     bar   [20] = type I/O Port, range 32, base 0x1000, size 128,  
enabled
     cap 01[54] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 05[5c] = MSI supports 1 message, 64 bit
     cap 10[70] = PCI-Express 1 legacy endpoint max data 128(1024)  
link x1(x1)

> Have you loaded siis via loader.conf or later with kldload? You  
> should use loader.conf, or ata(4) will grab first.

Loaded via kldload first, no reaction to card, so put it in  
loader.conf and rebooted. The dmesg was after reboot.

  $ grep siis /boot/loader.conf
siis_load="YES"


  - Greg