8.0-beta3 does not detect several ata channels
Nick Hilliard
nick-lists at netability.ie
Mon Aug 31 15:54:53 UTC 2009
Hi,
I have a hp proliant ML115 with 6 sata ports which run in ATA mode (bios
doesn't appear to give the option to use AHCI). On freebsd 7.x, all
channels are detected. On freebsd8.0-beta3, the disks attached to the
first two SATA ports are not detected, although it detects the ports
themselves.
I've attached a verbose dmesg from freebsd 7.1 and 8.0-beta3.
Any ideas on what's going on here? This seems like a nasty regression.
Nick
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA3 #0: Sat Aug 22 02:00:45 UTC 2009
root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813fd000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff813fd250.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2100015639 Hz
CPU: Quad-Core AMD Opteron(tm) Processor 1352 (2100.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000001427000 - 0x00000000cff9ffff, 3468136448 bytes (846713 pages)
0x00000000cffae000 - 0x00000000cffaffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x000000021f8b3fff, 4824186880 bytes (1177780 pages)
avail memory = 8250327040 (7868 MB)
ACPI APIC Table: <HP ProLiant>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xf9910 00024 (v2 HP )
ACPI: XSDT 0xcffb0100 0007C (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: FACP 0xcffb0290 000F4 (v4 HP ProLiant 20080526 FOXC 00000097)
ACPI: DSDT 0xcffb0680 04D97 (v2 HP ProLiant 00000800 INTL 20051117)
ACPI: FACS 0xcffbe000 00040
ACPI: APIC 0xcffb0390 00086 (v2 HP ProLiant 20080526 FOXC 00000097)
ACPI: MCFG 0xcffb0470 0003C (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: SPMI 0xcffb04b0 00041 (v5 HP ProLiant 20080526 FOXC 00000097)
ACPI: OEMB 0xcffbe040 00071 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: HPET 0xcffb5420 00038 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: EINJ 0xcffb5460 00130 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: BERT 0xcffb55f0 00030 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: ERST 0xcffb5620 001B0 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: HEST 0xcffb57d0 000A8 (v1 HP ProLiant 20080526 FOXC 00000097)
ACPI: SSDT 0xcffb5880 00A30 (v1 HP ProLiant 20080526 FOXC 00000097)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
wlan: <802.11 Link Layer>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <HP ProLiant> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff800001a000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
ACPI timer: 1/1 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0360, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled
map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled
map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 21 with weight 0
pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcebf000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 22 with weight 0
pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcebec00, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 23 with weight 0
pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xdd80, size 3, enabled
map[14]: type I/O Port, range 32, base 0xdd00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xdc00, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdb80, size 2, enabled
map[20]: type I/O Port, range 32, base 0xdb00, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebd000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xda80, size 3, enabled
map[14]: type I/O Port, range 32, base 0xda00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd980, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd900, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd880, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebc000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=2
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd780, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd700, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd680, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd600, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebb000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0)
pci_link18: Picked IRQ 23 with weight 1
pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0376, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
domain=0, bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcebf000-0xfcebffff irq 22 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcebf000
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 49
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcebec00-0xfcebecff irq 23 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfcebec00
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 50
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 SATA300 controller> port 0xdd80-0xdd87,0xdd00-0xdd03,0xdc00-0xdc07,0xdb80-0xdb83,0xdb00-0xdb0f mem 0xfcebd000-0xfcebdfff irq 21 at device 5.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdb00
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebd000
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdd80
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xdd00
ata2: SATA connect time=0ms status=00000123
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xdc00
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdb80
ata3: SATA connect time=0ms status=00000123
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xda80-0xda87,0xda00-0xda03,0xd980-0xd987,0xd900-0xd903,0xd880-0xd88f mem 0xfcebc000-0xfcebcfff irq 22 at device 5.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebc000
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xda80
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xda00
ata4: SATA connect time=0ms status=00000123
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd980
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd900
ata5: SATA connect time=0ms status=00000123
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xd800-0xd807,0xd780-0xd783,0xd700-0xd707,0xd680-0xd683,0xd600-0xd60f mem 0xfcebb000-0xfcebbfff irq 23 at device 5.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd600
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebb000
ata6: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd780
ata6: SATA connect time=0ms status=00000113
ata6: reset tp1 mask=01 ostat0=50 ostat1=00
ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=50 stat1=00 devices=0x1
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd700
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd680
ata7: SATA connect time=0ms status=00000113
ata7: reset tp1 mask=01 ostat0=50 ostat1=00
ata7: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata7: reset tp2 stat0=00 stat1=00 devices=0x10000
ata7: [MPSAFE]
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <PCI-PCI bridge> at device 11.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xe000-0xefff
pcib4: memory decode 0xfcf00000-0xfcffffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfcfe0000, size 17, enabled
pcib4: requested memory range 0xfcfe0000-0xfcffffff: good
map[14]: type Memory, range 32, base 0xfcfc0000, size 17, enabled
pcib4: requested memory range 0xfcfc0000-0xfcfdffff: good
map[18]: type I/O Port, range 32, base 0xef80, size 5, enabled
pcib4: requested I/O range 0xef80-0xef9f: in range
pcib4: matched entry for 4.0.INTA (src \\_SB_.LNEA:0)
pci_link4: Picked IRQ 16 with weight 0
pcib4: slot 0 INTA routed to irq 16 via \\_SB_.LNEA
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xef80-0xef9f mem 0xfcfe0000-0xfcffffff,0xfcfc0000-0xfcfdffff irq 16 at device 0.0 on pci4
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcfe0000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:23:7d:fd:26:e4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib5: domain 0
pcib5: secondary bus 16
pcib5: subordinate bus 16
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfd000000-0xfdefffff
pcib5: prefetched decode 0xfb000000-0xfbffffff
pci16: <ACPI PCI bus> on pcib5
pci16: domain=0, physical bus=16
found-> vendor=0x102b, dev=0x0522, revid=0x02
domain=0, bus=16, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled
pcib5: requested memory range 0xfb000000-0xfbffffff: good
map[14]: type Memory, range 32, base 0xfdefc000, size 14, enabled
pcib5: requested memory range 0xfdefc000-0xfdefffff: good
map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled
pcib5: requested memory range 0xfd000000-0xfd7fffff: good
pcib5: matched entry for 16.0.INTA (src \\_SB_.LNED:0)
pci_link7: Picked IRQ 17 with weight 0
pcib5: slot 0 INTA routed to irq 17 via \\_SB_.LNED
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 17 at device 0.0 on pci16
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib6: domain 0
pcib6: secondary bus 17
pcib6: subordinate bus 17
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xfdf00000-0xfdffffff
pcib6: no prefetched decode
pci17: <ACPI PCI bus> on pcib6
pci17: domain=0, physical bus=17
found-> vendor=0x14e4, dev=0x165a, revid=0x00
domain=0, bus=17, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdff0000, size 16, enabled
pcib6: requested memory range 0xfdff0000-0xfdffffff: good
pcib6: matched entry for 17.0.INTA (src \\_SB_.LNEC:0)
pci_link6: Picked IRQ 18 with weight 0
pcib6: slot 0 INTA routed to irq 18 via \\_SB_.LNEC
pci0:17:0:0: failed to read VPD data.
bge0: <Broadcom BCM5722 A0, ASIC rev. 0xa200> mem 0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci17
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdff0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 53
bge0: using IRQ 257 for MSI
bge0: CHIP ID 0xa2000000; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x002d, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:23:7d:db:b6:d8
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib7: domain 0
pcib7: secondary bus 18
pcib7: subordinate bus 18
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci18: <ACPI PCI bus> on pcib7
pci18: domain=0, physical bus=18
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
uart0: [FILTER]
uart0: fast interrupt
atrtc1: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc1: registered as a time-of-day clock (resolution 1000000us)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
ex_isa_identify()
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
isa_probe_children: disabling PnP devices
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff on isa0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: Warning: Couldn't map Interrupt.
atrtc1: removed as time-of-day clock: clock atrtc has higher resolution
atrtc0: registered as a time-of-day clock (resolution 1000000us)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 512326 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100000754 hz
Timecounter "TSC" frequency 2100015639 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80ffb600
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ata2: reiniting channel ..
ata2: SATA connect time=0ms status=00000123
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
ata2: reiniting channel ..
ata2: SATA connect time=0ms status=00000123
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
ata3: reiniting channel ..
ata3: SATA connect time=0ms status=00000123
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
uhub1: 10 ports with 10 removable, self powered
ata3: reiniting channel ..
ata3: SATA connect time=0ms status=00000123
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 1430799MB <Seagate ST31500341AS CC1H> at ata4-master SATA300
ad8: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad8
ad8: nVidia check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 1430799MB <Seagate ST31500341AS CC1H> at ata5-master SATA300
ad10: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: nVidia check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata6: Identifying devices: 00000001
ata6: New devices: 00000001
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 238475MB <Seagate ST3250310NS SN06> at ata6-master SATA150
ad12: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad12
ad12: nVidia check1 failed
ad12: Adaptec check1 failed
ad12: LSI (v3) check1 failed
ad12: LSI (v2) check1 failed
ad12: FreeBSD check1 failed
ata7: Identifying devices: 00010000
ata7: New devices: 00010000
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <TSSTcorpDVD-ROM TS-H353B/IG01> DVDROM drive at ata7 as master
acd0: read 8268KB/s (8268KB/s), 198KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 3 vector 48
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 49
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 49
msi: Assigning MSI IRQ 256 to local APIC 3 vector 49
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad12s1: geometry does not match label (255h,63s != 16h,63s).
ugen0.2: <ServerEngines> at usbus0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/md0
ct_to_ts([2009-08-31 16:42:19]) = 1251736939.000000000
start_init: trying /sbin/init
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009
root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c4e000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80c4e210.
Calibrating clock(s) ... i8254 clock: 1193279 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2100015187 Hz
CPU: Quad-Core AMD Opteron(tm) Processor 1352 (2100.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,<b23>>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
Cores per package: 4
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 8576217088 (8178 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d50000 - 0x00000000cff9ffff, 3475308544 bytes (848464 pages)
0x0000000100000000 - 0x000000021f8f9fff, 4824473600 bytes (1177850 pages)
avail memory = 8288804864 (7904 MB)
ACPI APIC Table: <HP ProLiant>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ULE: setup cpu group 2
ULE: setup cpu 2
ULE: adding cpu 2 to group 2: cpus 1 mask 0x4
ULE: setup cpu group 3
ULE: setup cpu 3
ULE: adding cpu 3 to group 3: cpus 1 mask 0x8
ACPI: RSDP @ 0x0xf9910/0x0024 (v 2 HP )
ACPI: XSDT @ 0x0xcffb0100/0x007C (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: FACP @ 0x0xcffb0290/0x00F4 (v 4 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: DSDT @ 0x0xcffb0680/0x4D97 (v 2 HP ProLiant 0x00000800 INTL 0x20051117)
ACPI: FACS @ 0x0xcffbe000/0x0040
ACPI: APIC @ 0x0xcffb0390/0x0086 (v 2 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: MCFG @ 0x0xcffb0470/0x003C (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: SPMI @ 0x0xcffb04b0/0x0041 (v 5 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: OEMB @ 0x0xcffbe040/0x0071 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: HPET @ 0x0xcffb5420/0x0038 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: EINJ @ 0x0xcffb5460/0x0130 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: BERT @ 0x0xcffb55f0/0x0030 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: ERST @ 0x0xcffb5620/0x01B0 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: HEST @ 0x0xcffb57d0/0x00A8 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
ACPI: SSDT @ 0x0xcffb5880/0x0A30 (v 1 HP ProLiant 0x20080526 FOXC 0x00000097)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jan 1 2009 08:57:24)
acpi0: <HP ProLiant> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0360, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled
map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled
map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 21 with weight 0
pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcebf000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 22 with weight 0
pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcebec00, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 23 with weight 0
pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xdd80, size 3, enabled
map[14]: type I/O Port, range 32, base 0xdd00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xdc00, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdb80, size 2, enabled
map[20]: type I/O Port, range 32, base 0xdb00, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebd000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xda80, size 3, enabled
map[14]: type I/O Port, range 32, base 0xda00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd980, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd900, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd880, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebc000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=2
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd780, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd700, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd680, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd600, size 4, enabled
map[24]: type Memory, range 32, base 0xfcebb000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0)
pci_link18: Picked IRQ 23 with weight 1
pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0376, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
domain=0, bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcebf000-0xfcebffff irq 22 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcebf000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcebec00-0xfcebecff irq 23 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfcebec00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 SATA300 controller> port 0xdd80-0xdd87,0xdd00-0xdd03,0xdc00-0xdc07,0xdb80-0xdb83,0xdb00-0xdb0f mem 0xfcebd000-0xfcebdfff irq 21 at device 5.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdb00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 51
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebd000
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdd80
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xdd00
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xdc00
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdb80
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xda80-0xda87,0xda00-0xda03,0xd980-0xd987,0xd900-0xd903,0xd880-0xd88f mem 0xfcebc000-0xfcebcfff irq 22 at device 5.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebc000
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xda80
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xda00
ata4: SATA connect time=0ms
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd980
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd900
ata5: SATA connect time=0ms
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xd800-0xd807,0xd780-0xd783,0xd700-0xd707,0xd680-0xd683,0xd600-0xd60f mem 0xfcebb000-0xfcebbfff irq 23 at device 5.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd600
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcebb000
ata6: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd780
ata6: SATA connect time=0ms
ata6: reset tp1 mask=01 ostat0=50 ostat1=00
ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd700
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd680
ata7: SATA connect time=0ms
ata7: reset tp1 mask=01 ostat0=50 ostat1=00
ata7: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata7: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata7: [MPSAFE]
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <PCI-PCI bridge> at device 11.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xe000-0xefff
pcib4: memory decode 0xfcf00000-0xfcffffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfcfe0000, size 17, enabled
pcib4: requested memory range 0xfcfe0000-0xfcffffff: good
map[14]: type Memory, range 32, base 0xfcfc0000, size 17, enabled
pcib4: requested memory range 0xfcfc0000-0xfcfdffff: good
map[18]: type I/O Port, range 32, base 0xef80, size 5, enabled
pcib4: requested I/O range 0xef80-0xef9f: in range
pcib4: matched entry for 4.0.INTA (src \\_SB_.LNEA:0)
pci_link4: Picked IRQ 16 with weight 0
pcib4: slot 0 INTA routed to irq 16 via \\_SB_.LNEA
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xef80-0xef9f mem 0xfcfe0000-0xfcffffff,0xfcfc0000-0xfcfdffff irq 16 at device 0.0 on pci4
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcfe0000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 52
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:23:7d:fd:26:e4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib5: domain 0
pcib5: secondary bus 16
pcib5: subordinate bus 16
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfd000000-0xfdefffff
pcib5: prefetched decode 0xfb000000-0xfbffffff
pci16: <ACPI PCI bus> on pcib5
pci16: domain=0, physical bus=16
found-> vendor=0x102b, dev=0x0522, revid=0x02
domain=0, bus=16, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled
pcib5: requested memory range 0xfb000000-0xfbffffff: good
map[14]: type Memory, range 32, base 0xfdefc000, size 14, enabled
pcib5: requested memory range 0xfdefc000-0xfdefffff: good
map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled
pcib5: requested memory range 0xfd000000-0xfd7fffff: good
pcib5: matched entry for 16.0.INTA (src \\_SB_.LNED:0)
pci_link7: Picked IRQ 17 with weight 0
pcib5: slot 0 INTA routed to irq 17 via \\_SB_.LNED
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 17 at device 0.0 on pci16
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib6: domain 0
pcib6: secondary bus 17
pcib6: subordinate bus 17
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xfdf00000-0xfdffffff
pcib6: no prefetched decode
pci17: <ACPI PCI bus> on pcib6
pci17: domain=0, physical bus=17
found-> vendor=0x14e4, dev=0x165a, revid=0x00
domain=0, bus=17, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdff0000, size 16, enabled
pcib6: requested memory range 0xfdff0000-0xfdffffff: good
pcib6: matched entry for 17.0.INTA (src \\_SB_.LNEC:0)
pci_link6: Picked IRQ 18 with weight 0
pcib6: slot 0 INTA routed to irq 18 via \\_SB_.LNEC
bge0: <HP NC105i PCIe Gigabit Server Adapter, ASIC rev. 0xa200> mem 0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci17
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdff0000
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x002d, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:23:7d:db:b6:d8
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib7: domain 0
pcib7: secondary bus 18
pcib7: subordinate bus 18
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci18: <ACPI PCI bus> on pcib7
pci18: domain=0, physical bus=18
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
ex_isa_identify()
sio: sio0 already exists; skipping it
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0087
atkbd: keyboard ID 0x83ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0087
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 235635 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100000729 hz
Timecounter "TSC" frequency 2100015187 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 1430799MB <Seagate ST31500341AS CC1H> at ata2-master SATA300
ad4: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 1430799MB <Seagate ST31500341AS CC1H> at ata3-master SATA300
ad6: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: nVidia check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 1430799MB <Seagate ST31500341AS CC1H> at ata4-master SATA300
ad8: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad8
ad8: nVidia check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 1430799MB <Seagate ST31500341AS CC1H> at ata5-master SATA300
ad10: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: nVidia check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 238475MB <Seagate ST3250310NS SN06> at ata6-master SATA150
ad12: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad12
ad12: nVidia check1 failed
ad12: Adaptec check1 failed
ad12: LSI (v3) check1 failed
ad12: LSI (v2) check1 failed
ad12: FreeBSD check1 failed
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <TSSTcorpDVD-ROM TS-H353B/IG01> DVDROM drive at ata7 as master
acd0: read 689KB/s (8268KB/s), 198KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 2
ioapic0: Assigning ISA IRQ 12 to local APIC 3
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 2
ioapic0: Assigning PCI IRQ 23 to local APIC 3
msi: Assigning MSI IRQ 256 to local APIC 0
Trying to mount root from ufs:/dev/ad12s1a
start_init: trying /sbin/init
More information about the freebsd-current
mailing list