USB Card Reader not detected

[Yoshihiro Ota]

On Wed, 26 Aug 2009 20:15:09 +0200
Hans Petter Selasky <hselasky at c2i.net> wrote:

> On Wednesday 26 August 2009 19:05:57 Yoshihiro Ota wrote:
> > Hi.
> >
> > I have a 9-in-1 card reader that works fine on 7.1-RELEASE.
> > I tested on 8-BETA2 or 3, updated with CVS this Monday but devices like daX
> > didn't come up.
> 
> Hi,
> 
> If there are no messages printed at all in dmesg, then you can try enabling 
> USB debugging for the HUB:
> 
> sysctl hw.usb.uhub.debug=15
> 
> --HPS

It was 8-BETA3.
I just realized that the following dmesg keeps coming every second.
It is pasted at the bottom.

I also realized anther problem.
I have HP Pavilion dv6425us.
Release 7.x with this hardware cannot write correct msdos fs.
It can read and write files of its own with FreeBSD on dv6425us.
However, when I take this CF card, others, MaxOS X, FreeBSD on
other hardwares, and Windows with even this hardware, cannot
read or write the file written by FreeBSD on dv6425us.
FreeBSD dv6425us cannot read files written by others as well.
I have UFS on external drives; they don't have same kinds of issues.

Thanks,
Hiro


uhub_read_port_status:279: port 8, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
usb_needs_explore:1407: 
usb_bus_powerd:1594: bus=0xc4f1daa0
usb_bus_powerd:1677: Recomputing power masks
uhub_explore:559: udev=0xc507dc00 addr=1
uhub_read_port_status:279: port 1, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 2, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 3, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 4, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 5, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 6, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 7, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
uhub_read_port_status:279: port 8, wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION