Problems with mouse

[Andriy Gapon]

on 26/08/2009 11:59 Hans Petter Selasky said the following:
> On Wednesday 26 August 2009 10:05:54 Paul Kuntke wrote:
>> Hi,
>> after installing BETA3 I'm experiencing a strange behaviour of the
>> usb-mouse driver. When the mouse is plugged in while booting it will not
>> work but when its plugged in later (e.g. after logging in) everything will
>> be fine.
>>
>> Even if I unplug the mouse _after_ booting and replug it, it will not be
>> found. If I plug in a second one the second one will be found. But not the
>> one which was plugged while booting. Is there any workaround?
>>
> 
> What is the output from dmesg and usbconfig?

Hans,

I have a similar problem where sometimes my USB mouse won't get attached and
sometimes it will. For me it seems that the behavior depends on USB port that the
mouse is attached to. But maybe I have a different problem, maybe some ports are
indeed "bad".

Here is how it looks when the mouse fails to attach:
usb_alloc_device:1588: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usb_alloc_device:1626: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT!
usbd_req_re_enumerate:1539: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT!
usbd_req_re_enumerate:1539: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT!
ugen0.2: <(null)> at usbus0 (disconnected)
uhub_reattach_port:435: could not allocate new device!


Here is success:
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0

Not sure what kind of usbconfig output would be useful.
$ usbconfig -u 1 -a 2 show_ifdrv
ugen1.2: <USB Optical Mouse Logitech> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON
ugen1.2.0: ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2>

$ usbconfig -u 1 -a 2 dump_device_desc
ugen1.2: <USB Optical Mouse Logitech> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x046d
  idProduct = 0xc018
  bcdDevice = 0x4301
  iManufacturer = 0x0001  <Logitech>
  iProduct = 0x0002  <USB Optical Mouse>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

$ usbconfig -u 1 -a 2 dump_all_config_desc
ugen1.2: <USB Optical Mouse Logitech> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0022
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00a0
    bMaxPower = 0x0032

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0003
      bInterfaceSubClass = 0x0001
      bInterfaceProtocol = 0x0002
      iInterface = 0x0000  <no string>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x11
       RAW dump:
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x34,
       0x08 | 0x00

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081
        bmAttributes = 0x0003
        wMaxPacketSize = 0x0005
        bInterval = 0x000a
        bRefresh = 0x0000
        bSynchAddress = 0x0000

-- 
Andriy Gapon