new usb: mass storage error, Synchronize cache failed

[Renato Botelho]

On Wed, Apr 8, 2009 at 9:38 AM, Hans Petter Selasky <hselasky at c2i.net> wrote:
> On Wednesday 08 April 2009, Renato Botelho wrote:
>> On Wed, Apr 8, 2009 at 3:16 AM, Hans Petter Selasky <hselasky at c2i.net>
> wrote:
>> > On Tuesday 07 April 2009, Renato Botelho wrote:
>> >> When I plug a gradiente cell phone on my USB I got this:
>> >>
>> >> Apr  7 15:33:01 botelhor root: Unknown USB device: vendor 0x0e8d
>> >> product 0x0002 bus uhub0
>> >> Apr  7 15:33:01 botelhor kernel: ugen0.2: <EZZE-E800GF> at usbus0
>> >> Apr  7 15:33:01 botelhor kernel: umass0: <EZZE -Storage> on usbus0
>> >> Apr  7 15:33:01 botelhor kernel: umass0:  SCSI over Bulk-Only; quirks =
>> >> 0x0000 Apr  7 15:33:02 botelhor kernel: umass0:0:0:-1: Attached to
>> >> scbus0 Apr  7 15:33:02 botelhor kernel: da0 at umass-sim0 bus 0 target 0
>> >> lun 0 Apr 7 15:33:02 botelhor kernel: da0: <GF-500  > Removable Direct
>> >> Access SCSI-0 device
>> >> Apr  7 15:33:02 botelhor kernel: da0: 1.000MB/s transfers
>> >> Apr  7 15:33:02 botelhor kernel: da0: 982MB (2012160 512 byte sectors:
>> >> 64H 32S/T 982C)
>> >> Apr  7 15:33:02 botelhor kernel: da1 at umass-sim0 bus 0 target 0 lun 1
>> >> Apr  7 15:33:02 botelhor kernel: da1: <GF-500  > Removable Direct
>> >> Access SCSI-0 device
>> >> Apr  7 15:33:02 botelhor kernel: da1: 1.000MB/s transfers
>> >> Apr  7 15:33:02 botelhor kernel: da1: 1MB (3668 512 byte sectors: 64H
>> >> 32S/T 1C) Apr  7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does
>> >> not start on a track boundary.
>> >> Apr  7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does not end
>> >> on a track boundary.
>> >> Apr  7 15:33:04 botelhor kernel: umass0: at uhub0, port 2, addr 2
>> >> (disconnected) Apr  7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1):
>> >> Synchronize cache failed, status == 0x3f, scsi status == 0x0
>> >> Apr  7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): lost device
>> >> Apr  7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): removing device
>> >> entry Apr  7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): lost
>> >> device Apr  7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): removing
>> >> device entry Apr  7 15:33:04 botelhor kernel: ugen0.2: <EZZE-E800GF> at
>> >> usbus0 (disconnected)
>> >>
>> >> Using 8.0-CURRENT r190550
>> >>
>> >> I've tried on all usb ports, and have the same. Any idea?
>> >
>> > Your device probably needs the no synchronize cache quirk. See quirk
>> > table in /sys/dev/usb/storage/umass.c .
>>
>> Hans,
>>
>> I got it and can make tests here, but, i cannot find EZZE-E800GF or nothing
>> related on usbdevs, I don't know where this description came from. Could
>> you point me to the right place?
>>
>
> usbconfig dump_device_desc
>
> Look for idVendor and idProduct

I did it:

ugen1.2: <GF-500 EZZE-E800GF> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0110
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x0e8d
  idProduct = 0x0002
  bcdDevice = 0x0001
  iManufacturer = 0x0002  <EZZE-E800GF>
  iProduct = 0x0003  <GF-500 >
  iSerialNumber = 0x0004  <53923610014483f>
  bNumConfigurations = 0x0001

And I created attached patch but nothing different happened,
when I plug usb in, the same result.

Thanks
-- 
Renato Botelho
-------------- next part --------------
A non-text attachment was scrubbed...
Name: usb.diff
Type: application/octet-stream
Size: 1201 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20090408/23a46b97/usb.obj