Unable to associate using NDIS driver to WPA/WPA2 APs post
2009/03/26
Keith White
kwhite at site.uottawa.ca
Mon Apr 6 07:21:24 PDT 2009
The platform is an msi wind U100 using an NDIS driver for the onboard rt2860.
This has worked well, both at home with WPA2-PSK and at work with
WPA2-EAP, until recently [post 2009/03/26?]. It stopped working
with the recent changes to if_ndis and net80211.
My current workaround is to use older versions of wlan.ko and
if_ndis.ko, but that's not going to continue forever...
ident differences between working and current versions:
=== if_ndis ===
1 $FreeBSD: src/sys/dev/if_ndis/if_ndis.c,v 1.154 2009/03/24 04:20:17 weongyo Exp $
1 $FreeBSD: src/sys/dev/if_ndis/if_ndis.c,v 1.155 2009/03/29 17:59:14 sam Exp $
=== wlan.ko ===
1 $FreeBSD: src/sys/net80211/ieee80211.c,v 1.68 2009/03/24 20:39:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211.c,v 1.70 2009/03/29 21:17:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_ddb.c,v 1.23 2009/02/27 14:12:05 bz Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_ddb.c,v 1.24 2009/03/29 17:59:14 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_freebsd.c,v 1.25 2009/01/08 17:12:47 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_freebsd.c,v 1.27 2009/03/30 21:53:27 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_hostap.c,v 1.15 2009/03/24 20:39:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_hostap.c,v 1.16 2009/03/30 21:53:27 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_ioctl.c,v 1.83 2009/03/24 20:39:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_ioctl.c,v 1.84 2009/03/29 21:17:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_node.c,v 1.123 2009/03/24 20:39:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_node.c,v 1.125 2009/03/30 21:53:27 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_output.c,v 1.79 2009/03/26 19:13:11 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_output.c,v 1.82 2009/04/03 20:46:32 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_scan.c,v 1.13 2009/02/22 18:46:36 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_scan.c,v 1.14 2009/03/29 21:17:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_sta.c,v 1.14 2009/03/25 03:02:03 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_sta.c,v 1.15 2009/03/30 21:53:27 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_wds.c,v 1.7 2009/03/24 20:39:08 sam Exp $
1 $FreeBSD: src/sys/net80211/ieee80211_wds.c,v 1.8 2009/04/03 18:00:19 sam Exp $
=== config ===
cpu I686_CPU
ident "U100"
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options STOP_NMI # Stop CPUS using NMI instead of IPI
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
#options KDTRACE_HOOKS # Kernel DTrace hooks
#options DDB_CTF # for DTrace
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Add suspend/resume support for the i8254.
device pmtimer
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
=== dmesg ===
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #6: Sun Apr 5 17:44:36 UTC 2009
root at demo:/usr/src/obj/usr/src/sys/U100
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1600.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Logical CPUs per core: 2
real memory = 1062936576 (1013 MB)
avail memory = 1026977792 (979 MB)
ACPI APIC Table: <MSI_NB MEGABOOK>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
no match for ZwWriteFile
no match for ZwCreateFile
no match for ZwReadFile
cryptosoft0: <software crypto> on motherboard
acpi0: <MSI_NB MEGABOOK> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xc4227740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xc4228260), AE_NOT_EXIST
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe100-0xe107 mem 0xdfe80000-0xdfefffff,0xc0000000-0xcfffffff,0xdff00000-0xdff3ffff irq 16 at device 2.0 on pci0
agp0: <Intel 945GME SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
acpi_video0: <ACPI video extension> on vgapci0
vgapci1: <VGA-compatible display> mem 0xdfe00000-0xdfe7ffff at device 2.1 on pci0
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xffe00000-0xffe03fff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090401_0132
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ndis0: <802.11n Wireless LAN Card> mem 0xdfc00000-0xdfc0ffff irq 17 at device 0.0 on pci2
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.0
NDIS: could not find file rate.bin in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
uhci0: <UHCI (generic) USB controller> port 0xe0a0-0xe0bf irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x1f30
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xe060-0xe07f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <UHCI (generic) USB controller> on uhci2
uhci3: <UHCI (generic) USB controller> port 0xe040-0xe05f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <UHCI (generic) USB controller> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdff40400-0xdff407ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port 0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe0d0-0xe0d7,0xe0c0-0xe0c3,0xe020-0xe02f mem 0xdff40000-0xdff403ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.10 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 2> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad4: 152627MB <WDC WD1600BEVT-22ZCT0 11.01A11> at ata2-master SATA150
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen1.1: <Intel> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
GEOM_LABEL: Label for provider ad4s1 is msdosfs/WINRE.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
GEOM_LABEL: Label for provider ad4s2 is ntfs/OS_Install.
GEOM_LABEL: Label for provider ad4s4 is ufsid/49d7d542f62efef2.
GEOM_LABEL: Label for provider ad4s4 is ufs/Source.
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <vendor 0x5986> at usbus4
Root mount waiting for: usbus4
ugen4.3: <Generic> at usbus4
umass0: <Bulk-In, Bulk-Out, Interface> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus4
umass0:0:0:-1: Attached to scbus0
Root mount waiting for: CAM usbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 990MB (2029056 512 byte sectors: 64H 32S/T 990C)
GEOM_LABEL: Label for provider da0s1 is label/Thumb.
GEOM_LABEL: Label for provider da0s1 is msdosfs/THUMB.
Enter passphrase for da0s3: ugen3.2: <Micro Star International> at usbus3
********
GEOM_ELI: Device da0s3.eli created.
GEOM_ELI: Encryption: Blowfish-CBC 128
GEOM_ELI: Crypto: software
GEOM_LABEL: Label for provider da0s2a is ufsid/49cbe7372542dd60.
GEOM_LABEL: Label for provider da0s2a is ufs/dotRoot.
da0s3.eli.uzip: 31627 x 32768 blocks
GEOM: da0s3.eli.uzip: media size does not match label.
GEOM_LABEL: Label for provider da0s3.eli.uzipa is ufsid/49d826e6cbc92b93.
GEOM_LABEL: Label for provider da0s3.eli.uzipa is ufs/FreeBSDonUSB.
Trying to mount root from ufs:ufs/FreeBSDonUSB
GEOM_LABEL: Label for provider md0 is ufsid/49d9fb847ed4f656.
GEOM_LABEL: Label ufsid/49d9fb847ed4f656 removed.
wlan0: Ethernet address: 00:1d:92:cd:45:d0
NDIS: open file /compat/ndis/rate.bin failed: 2
GEOM_LABEL: Label for provider md1 is ufsid/49d9fba8f0ad448d.
===
...keith
--
Keith White, EITI/SITE, University of Ottawa
kwhite at site.uottawa.ca [+1 613 562 5800 x6681] FAX [+1 613 562 5664]
More information about the freebsd-current
mailing list