Request for testers: Option 3G cards, also Sierra, Huawei
and Novatel
Mike Tancsa
mike at sentex.net
Wed Nov 5 08:19:48 PST 2008
At 04:44 PM 10/9/2008, Nick Hibma wrote:
>Just now I have committed a driver for Option and Huawei cards previously
>supported by the ubsa driver. More information is in the commit message.
>
>I am looking for people who would be able to provide more information after
>testing with the 3G cards branded by:
Hi,
I gave it a try on the Sierra USB card and it seems to work
really well on RELENG_7! There is however also a mini-pci express
version of the Sierra card, the MC8775. Do you have plans to add
support for it ? I am not sure how the unit is even supposed to show
up as I dont see it in the dmesg, but I do see that it shows some
sort of umass device
# usbdevs
addr 1: OHCI root hub, AMD
addr 2: USB MMC Storage, Sierra Wireless
addr 1: EHCI root hub, AMD
dmesg snippet
...
isa_probe_children: probing PnP devices
umass0: <Sierra Wireless USB MMC Storage, class 0/0, rev 1.10/0.00,
addr 2> on uhub0
umass0:0:0:-1: Attached to scbus0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 498053687 Hz quality 800
Timecounters tick every 1.000 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
pflog0: bpf attached
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ad0: setting PIO4 on CS5536 chip
ad0: 1953MB <SanDisk SDCFH2-002G HDX 4.32> at ata0-master PIO4
ad0: 4001760 sectors [3970C/16H/63S] 4 sectors/interrupt 1 depth queue
GEOM: new disk ad0
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <AirCard TRU-Install 2.31> Removable CD-ROM SCSI-0 device
pass0: 1.000MB/s transfers
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
bridge0: bpf attached
bridge0: Ethernet address: 3a:72:35:a3:25:ce
tun0: bpf attached
Not sure why it shows up as a passthrough device ?
---Mike
>OEM:
> Merlin
> Huawei
> Option
> Sierra
> Novatel
> Qualcomm
>
>Rebranded:
> Dell
> Vodafone
>
>Note: The driver can be copied across to FreeBSD 7-STABLE if you copy the
>sys/modules/u3g directory and sys/dev/usb/u3g.c and sys/dev/usb/usbdevs
>files from HEAD and _move_ the ID from ubsa to u3g.
>
>More information can be found on
>
> http://people.freebsd.org/~n_hibma/u3g.html
>
>Thanks,
>
>Nick
>---------- Forwarded Message ----------
>Subject: svn commit: r183735 - in head: share/man/man4 sys/conf sys/dev/usb
>sys/i386/conf sys/modules sys/modules/u3g
>Date: Thu October 9 2008
>From: Nick Hibma <n_hibma at freebsd.org>
>To: src-committers at freebsd.org, svn-src-all at freebsd.org,
>svn-src-head at freebsd.org
>
>Author: n_hibma
>Date: Thu Oct 9 21:25:01 2008
>New Revision: 183735
>URL: http://svn.freebsd.org/changeset/base/183735
>
>Log:
> Say hello to the u3g driver, implementing support for 3G modems.
>
> This was located in the ubsa driver, but should be moved into a separate
> driver:
>
> - 3G modems provide multiple serial ports to allow AT commands while the
>PPP
> connection is up.
> - 3G modems do not provide baud rate or other serial port settings.
> - Huawei cards need specific initialisation.
> - ubsa is for Belkin adapters, an Linuxy choice for another device like
>3G.
>
> Speeds achieved here with a weak signal at best is ~40kb/s (UMTS). No
>spooky
> STALLED messages as well.
>
> Next: Move over all entries for Sierra and Novatel cards once I have found
> testers, and implemented serial port enumeration for Sierra (or rather
>have
> Andrea Guzzo do it). They list all endpoints in 1 iface instead of 4
>ifaces.
>
> Submitted by: aguzzo at anywi.com
> MFC after: 3 weeks
>
>Added:
> head/share/man/man4/u3g.4 (contents, props changed)
> head/sys/dev/usb/u3g.c (contents, props changed)
> head/sys/modules/u3g/
> head/sys/modules/u3g/Makefile (contents, props changed)
>Modified:
> head/share/man/man4/Makefile
> head/sys/conf/NOTES
> head/sys/conf/files
> head/sys/dev/usb/ubsa.c
> head/sys/dev/usb/usbdevs
> head/sys/i386/conf/GENERIC
> head/sys/modules/Makefile
>
>Modified: head/share/man/man4/Makefile
>==============================================================================
>--- head/share/man/man4/Makefile Thu Oct 9 20:51:25
>2008 (r183734)
>+++ head/share/man/man4/Makefile Thu Oct 9 21:25:01
>2008 (r183735)
>@@ -384,6 +384,7 @@ MAN= aac.4 \
> twe.4 \
> tx.4 \
> txp.4 \
>+ u3g.4 \
> uark.4 \
> uart.4 \
> ubsa.4 \
>
>Added: head/share/man/man4/u3g.4
>==============================================================================
>--- /dev/null 00:00:00 1970 (empty, because file is newly added)
>+++ head/share/man/man4/u3g.4 Thu Oct 9 21:25:01 2008 (r183735)
>@@ -0,0 +1,100 @@
>+.\"
>+.\" Copyright (c) 2008 AnyWi Technologies
>+.\" All rights reserved.
>+.\"
>+.\" This code is derived from uark.c
>+.\"
>+.\" Permission to use, copy, modify, and distribute this software for any
>+.\" purpose with or without fee is hereby granted, provided that the above
>+.\" copyright notice and this permission notice appear in all copies.
>+.\"
>+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
>WARRANTIES
>+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
>+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
>+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
>+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
>+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
>+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>+.\"
>+.\" $FreeBSD$
>+.\"
>+.Dd October 7, 2008
>+.Dt U3G 4
>+.Os
>+.Sh NAME
>+.Nm u3g
>+.Nd USB support for 3G datacards
>+.Sh SYNOPSIS
>+To compile this driver into the kernel,
>+place the following lines in your
>+kernel configuration file:
>+.Bd -ragged -offset indent
>+.Cd "device u3g"
>+.Cd "device ucom"
>+.Ed
>+.Pp
>+Alternatively, to load the driver as a
>+module at boot time, place the following line in
>+.Xr loader.conf 5 :
>+.Bd -literal -offset indent
>+u3g_load="YES"
>+.Ed
>+.Sh DESCRIPTION
>+The
>+.Nm
>+driver provides support for the multiple USB-to-serial interfaces exposed
>by
>+many 3G usb/pccard modems.
>+.Pp
>+The device is accessed through the
>+.Xr ucom 4
>+driver which makes it behave like a
>+.Xr tty 4 .
>+.Sh HARDWARE
>+The
>+.Nm
>+driver supports the following adapters:
>+.Pp
>+.Bl -bullet -compact
>+.It
>+Option Globetrotter 3G Fusion (only 3G part, not WLAN)
>+.It
>+Option Globetrotter 3G Fusion Quad (only 3G part, not WLAN)
>+.It
>+Option Globetrotter 3G Quad
>+.It
>+Option Globetrotter 3G
>+.It
>+Vodafone Mobile Connect Card 3G
>+.It
>+Huawei E220 (E270?)
>+.It
>+Huawei Mobile
>+.El
>+.Pp
>+The supported 3G cards provide the necessary modem port for ppp,
>+pppd, or mpd connections as well as extra ports (depending on the specific
>+device) to provide other functions (diagnostic port, SIM toolkit port)
>+.Sh SEE ALSO
>+.Xr tty 4 ,
>+.Xr ucom 4 ,
>+.Xr usb 4 ,
>+.Xr ubsa 4
>+.Sh HISTORY
>+The
>+.Nm
>+driver
>+appeared in
>+.Fx 7.0 .
>+The
>+.Xr ubsa 4
>+manual page was modified for
>+.Nm
>+by
>+.An Andrea Guzzo Aq aguzzo at anywi.com
>+in September 2008.
>+.Sh AUTHORS
>+The
>+.Nm
>+driver was written by
>+.An Andrea Guzzo Aq aguzzo at anywi.com .
>+Hardware for testing provided by AnyWi Technologies, Leiden, NL.
>
>Modified: head/sys/conf/NOTES
>==============================================================================
>--- head/sys/conf/NOTES Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/conf/NOTES Thu Oct 9 21:25:01 2008 (r183735)
>@@ -2416,6 +2416,8 @@ device uscanner
> #
> # USB serial support
> device ucom
>+# USB support for 3G modem cards by Option, Huawei and Sierra
>+device u3g
> # USB support for Technologies ARK3116 based serial adapters
> device uark
> # USB support for Belkin F5U103 and compatible serial adapters
>@@ -2441,7 +2443,6 @@ device aue
>
> # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
> # LinkSys USB200M and various other adapters.
>-
> device axe
>
> #
>
>Modified: head/sys/conf/files
>==============================================================================
>--- head/sys/conf/files Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/conf/files Thu Oct 9 21:25:01 2008 (r183735)
>@@ -1327,6 +1327,7 @@ dev/usb/ohci_pci.c optional ohci pci
> dev/usb/sl811hs.c optional slhci
> dev/usb/slhci_pccard.c optional slhci pccard
> dev/usb/uark.c optional uark
>+dev/usb/u3g.c optional u3g
> dev/usb/ubsa.c optional ubsa
> dev/usb/ubser.c optional ubser
> dev/usb/ucom.c optional ucom
>
>Added: head/sys/dev/usb/u3g.c
>==============================================================================
>--- /dev/null 00:00:00 1970 (empty, because file is newly added)
>+++ head/sys/dev/usb/u3g.c Thu Oct 9 21:25:01 2008 (r183735)
>@@ -0,0 +1,330 @@
>+/*
>+ * Copyright (c) 2008 AnyWi Technologies
>+ * Author: Andrea Guzzo <aguzzo at anywi.com>
>+ * * based on uark.c 1.1 2006/08/14 08:30:22 jsg *
>+ * * parts from ubsa.c 183348 2008-09-25 12:00:56Z phk *
>+ *
>+ * Permission to use, copy, modify, and distribute this software for any
>+ * purpose with or without fee is hereby granted, provided that the above
>+ * copyright notice and this permission notice appear in all copies.
>+ *
>+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
>+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
>+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
>+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
>+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
>+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
>+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>+ *
>+ * $FreeBSD$
>+ */
>+
>+#include <sys/param.h>
>+#include <sys/systm.h>
>+#include <sys/kernel.h>
>+#include <sys/malloc.h>
>+#include <sys/module.h>
>+#include <sys/bus.h>
>+#include <sys/ioccom.h>
>+#include <sys/fcntl.h>
>+#include <sys/conf.h>
>+#include <sys/tty.h>
>+#include <sys/file.h>
>+#include <sys/selinfo.h>
>+
>+#include <dev/usb/usb.h>
>+#include <dev/usb/usbdi.h>
>+#include <dev/usb/usbdi_util.h>
>+
>+#include <dev/usb/ucomvar.h>
>+
>+#include "usbdevs.h"
>+
>+#ifdef U3G_DEBUG
>+#define DPRINTFN(n, x) do { if (u3gdebug > (n)) printf x; } while (0)
>+int u3gtebug = 0;
>+#else
>+#define DPRINTFN(n, x)
>+#endif
>+#define DPRINTF(x) DPRINTFN(0, x)
>+
>+#define U3GBUFSZ 1024
>+#define U3G_MAXPORTS 4
>+
>+struct u3g_softc {
>+ struct ucom_softc sc_ucom[U3G_MAXPORTS];;
>+ device_t sc_dev;
>+ usbd_device_handle sc_udev;
>+ u_char sc_msr;
>+ u_char sc_lsr;
>+ u_char numports;
>+
>+ usbd_interface_handle sc_intr_iface; /* interrupt interface */
>+#ifdef U3G_DEBUG
>+ int sc_intr_number; /* interrupt number */
>+ usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */
>+ u_char *sc_intr_buf; /* interrupt buffer */
>+#endif
>+ int sc_isize;
>+};
>+
>+struct ucom_callback u3g_callback = {
>+ NULL,
>+ NULL,
>+ NULL,
>+ NULL,
>+ NULL,
>+ NULL,
>+ NULL,
>+ NULL,
>+};
>+
>+static const struct usb_devno u3g_devs[] = {
>+ /* OEM: Option */
>+ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3G },
>+ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GQUAD },
>+ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GPLUS },
>+ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GTMAX36 },
>+ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_VODAFONEMC3G },
>+ /* OEM: Huawei */
>+ { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_MOBILE },
>+ { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 },
>+
>+ { 0, 0 }
>+};
>+
>+#ifdef U3G_DEBUG
>+static void
>+u3g_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status
>status)
>+{
>+ struct u3g_softc *sc = (struct u3g_softc *)priv;
>+ device_printf(sc->sc_dev, "INTERRUPT CALLBACK\n");
>+}
>+#endif
>+
>+static int
>+u3g_huawei_reinit(usbd_device_handle dev)
>+{
>+ /* The Huawei device presents itself as a umass device with Windows
>+ * drivers on it. After installation of the driver, it reinits into a
>+ * 3G serial device.
>+ */
>+ usb_device_request_t req;
>+ usb_config_descriptor_t *cdesc;
>+
>+ /* Get the config descriptor */
>+ cdesc = usbd_get_config_descriptor(dev);
>+ if (cdesc == NULL)
>+ return (UMATCH_NONE);
>+
>+ /* One iface means umass mode, more than 1 (4 usually) means
>3G mode */
>+ if (cdesc->bNumInterface > 1)
>+ return (UMATCH_VENDOR_PRODUCT);
>+
>+ req.bmRequestType = UT_WRITE_DEVICE;
>+ req.bRequest = UR_SET_FEATURE;
>+ USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP);
>+ USETW(req.wIndex, UHF_PORT_SUSPEND);
>+ USETW(req.wLength, 0);
>+
>+ (void) usbd_do_request(dev, &req, 0);
>+
>+ return UMATCH_NONE; /* mismatch; it will be gone and reappear */
>+}
>+
>+static int
>+u3g_match(device_t self)
>+{
>+ struct usb_attach_arg *uaa = device_get_ivars(self);
>+
>+ if (uaa->iface != NULL)
>+ return (UMATCH_NONE);
>+
>+ if (uaa->vendor == USB_VENDOR_HUAWEI)
>+ return u3g_huawei_reinit(uaa->device);
>+
>+ if (usb_lookup(u3g_devs, uaa->vendor, uaa->product))
>+ return UMATCH_VENDOR_PRODUCT;
>+
>+ return UMATCH_NONE;
>+}
>+
>+static int
>+u3g_attach(device_t self)
>+{
>+ struct u3g_softc *sc = device_get_softc(self);
>+ struct usb_attach_arg *uaa = device_get_ivars(self);
>+ usbd_device_handle dev = uaa->device;
>+ usbd_interface_handle iface;
>+ usb_interface_descriptor_t *id;
>+ usb_endpoint_descriptor_t *ed;
>+ usbd_status error;
>+ int i, n;
>+ usb_config_descriptor_t *cdesc;
>+ struct ucom_softc *ucom = NULL;
>+ char devnamefmt[32];
>+
>+ sc->sc_dev = self;
>+#ifdef DEBUG
>+ sc->sc_intr_number = -1;
>+ sc->sc_intr_pipe = NULL;
>+#endif
>+ /* Move the device into the configured state. */
>+ error = usbd_set_config_index(dev, 1, 1);
>+ if (error) {
>+ device_printf(self, "failed to set configuration: %s\n",
>+ usbd_errstr(error));
>+ goto bad;
>+ }
>+
>+ /* get the config descriptor */
>+ cdesc = usbd_get_config_descriptor(dev);
>+
>+ if (cdesc == NULL) {
>+ device_printf(self, "failed to get configuration
>descriptor\n");
>+ goto bad;
>+ }
>+
>+ sc->sc_udev = dev;
>+ sc->numports = (cdesc->bNumInterface <=
>U3G_MAXPORTS)?cdesc->bNumInterface:U3G_MAXPORTS;
>+ for ( i = 0; i < sc->numports; i++ ) {
>+ ucom = &sc->sc_ucom[i];
>+
>+ ucom->sc_dev = self;
>+ ucom->sc_udev = dev;
>+ error = usbd_device2interface_handle(dev, i, &iface);
>+ if (error) {
>+ device_printf(ucom->sc_dev,
>+ "failed to get interface, err=%s\n",
>+ usbd_errstr(error));
>+ ucom->sc_dying = 1;
>+ goto bad;
>+ }
>+ id = usbd_get_interface_descriptor(iface);
>+ ucom->sc_iface = iface;
>+
>+ ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1;
>+ for (n = 0; n < id->bNumEndpoints; n++) {
>+ ed = usbd_interface2endpoint_descriptor(iface, n);
>+ if (ed == NULL) {
>+ device_printf(ucom->sc_dev,
>+ "could not read endpoint
>descriptor\n");
>+ goto bad;
>+ }
>+ if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
>+ UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
>+ ucom->sc_bulkin_no = ed->bEndpointAddress;
>+ else if (UE_GET_DIR(ed->bEndpointAddress) ==
>UE_DIR_OUT &&
>+ UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
>+ ucom->sc_bulkout_no = ed->bEndpointAddress;
>+ }
>+ if (ucom->sc_bulkin_no == -1 || ucom->sc_bulkout_no == -1) {
>+ device_printf(ucom->sc_dev, "missing endpoint\n");
>+ goto bad;
>+ }
>+ ucom->sc_parent = sc;
>+ ucom->sc_ibufsize = U3GBUFSZ;
>+ ucom->sc_obufsize = U3GBUFSZ;
>+ ucom->sc_ibufsizepad = U3GBUFSZ;
>+ ucom->sc_opkthdrlen = 0;
>+
>+ ucom->sc_callback = &u3g_callback;
>+
>+ sprintf(devnamefmt,"U%d.%%d", device_get_unit(self));
>+ DPRINTF(("u3g: in=0x%x out=0x%x, devname=%s\n",
>+ ucom->sc_bulkin_no, ucom->sc_bulkout_no, devnamefmt));
>+#if __FreeBSD_version < 800000
>+ ucom_attach_tty(ucom, TS_CALLOUT, devnamefmt, i);
>+#else
>+ ucom_attach_tty(ucom, devnamefmt, i);
>+#endif
>+ }
>+#ifdef U3G_DEBUG
>+ if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
>+ sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
>+ error = usbd_open_pipe_intr(sc->sc_intr_iface,
>+ sc->sc_intr_number,
>+ USBD_SHORT_XFER_OK,
>+ &sc->sc_intr_pipe,
>+ sc,
>+ sc->sc_intr_buf,
>+ sc->sc_isize,
>+ u3g_intr,
>+ 100);
>+ if (error) {
>+ device_printf(self,
>+ "cannot open interrupt pipe (addr %d)\n",
>+ sc->sc_intr_number);
>+ goto bad;
>+ }
>+ }
>+#endif
>+ device_printf(self, "configured %d serial ports (/dev/cuaU%d.X)",
>+ sc->numports, device_get_unit(self));
>+
>+ return 0;
>+
>+bad:
>+ DPRINTF(("u3g_attach: ATTACH ERROR\n"));
>+ ucom->sc_dying = 1;
>+ return ENXIO;
>+}
>+
>+static int
>+u3g_detach(device_t self)
>+{
>+ struct u3g_softc *sc = device_get_softc(self);
>+ int rv = 0;
>+ int i;
>+
>+ DPRINTF(("u3g_detach: sc=%p\n", sc));
>+
>+ for (i = 0; i < sc->numports; i++) {
>+ if(sc->sc_ucom[i].sc_udev) {
>+ sc->sc_ucom[i].sc_dying = 1;
>+ rv = ucom_detach(&sc->sc_ucom[i]);
>+ if(rv != 0) {
>+ device_printf(self, "Can't deallocat
>port %d", i);
>+ return rv;
>+ }
>+ }
>+ }
>+
>+#ifdef U3G_DEBUG
>+ if (sc->sc_intr_pipe != NULL) {
>+ int err = usbd_abort_pipe(sc->sc_intr_pipe);
>+ if (err)
>+ device_printf(self,
>+ "abort interrupt pipe failed: %s\n",
>+ usbd_errstr(err));
>+ err = usbd_close_pipe(sc->sc_intr_pipe);
>+ if (err)
>+ device_printf(self,
>+ "close interrupt pipe failed: %s\n",
>+ usbd_errstr(err));
>+ free(sc->sc_intr_buf, M_USBDEV);
>+ sc->sc_intr_pipe = NULL;
>+ }
>+#endif
>+
>+ return 0;
>+}
>+
>+static device_method_t u3g_methods[] = {
>+ /* Device interface */
>+ DEVMETHOD(device_probe, u3g_match),
>+ DEVMETHOD(device_attach, u3g_attach),
>+ DEVMETHOD(device_detach, u3g_detach),
>+
>+ { 0, 0 }
>+};
>+
>+static driver_t u3g_driver = {
>+ "ucom",
>+ u3g_methods,
>+ sizeof (struct u3g_softc)
>+};
>+
>+DRIVER_MODULE(u3g, uhub, u3g_driver, ucom_devclass, usbd_driver_load, 0);
>+MODULE_DEPEND(u3g, usb, 1, 1, 1);
>+MODULE_DEPEND(u3g, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
>
>Modified: head/sys/dev/usb/ubsa.c
>==============================================================================
>--- head/sys/dev/usb/ubsa.c Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/dev/usb/ubsa.c Thu Oct 9 21:25:01 2008 (r183735)
>@@ -161,8 +161,6 @@ SYSCTL_INT(_hw_usb_ubsa, OID_AUTO, debug
> struct ubsa_softc {
> struct ucom_softc sc_ucom;
>
>- int sc_huawei;
>-
> int sc_iface_number; /*
> interface number */
>
> usbd_interface_handle sc_intr_iface; /* interrupt interface */
>@@ -228,24 +226,11 @@ static const struct ubsa_product {
> { USB_VENDOR_GOHUBS, USB_PRODUCT_GOHUBS_GOCOM232 },
> /* Peracom */
> { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_SERIAL1 },
>- /* Dell version of the Novatel 740 */
>- { USB_VENDOR_DELL, USB_PRODUCT_DELL_U740 },
>- /* Option Vodafone MC3G */
>- { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_VODAFONEMC3G },
>- /* Option GlobeTrotter 3G */
>- { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3G },
>- /* Option GlobeTrotter 3G QUAD */
>- { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GQUAD },
>- /* Option GlobeTrotter 3G+ */
>- { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GPLUS },
>- /* Option GlobeTrotter Max 3.6 */
>- { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GTMAX36 },
>- /* Huawei Mobile */
>- { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_MOBILE },
>- { USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E270 },
>+ /* Merlin */
> { USB_VENDOR_MERLIN, USB_PRODUCT_MERLIN_V620 },
> /* Qualcomm, Inc. ZTE CDMA */
> { USB_VENDOR_QUALCOMMINC, USB_PRODUCT_QUALCOMMINC_CDMA_MSM },
>+ /* Novatel */
> { USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_CDMA_MODEM },
> /* Novatel Wireless Merlin ES620 */
> { USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ES620 },
>@@ -256,6 +241,8 @@ static const struct ubsa_product {
> /* Novatel Wireless Merlin U740 */
> { USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U740 },
> { USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U740_2 },
>+ /* Dell version of the Novatel 740 */
>+ { USB_VENDOR_DELL, USB_PRODUCT_DELL_U740 },
> /* Novatel Wireless Merlin U950D */
> { USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U950D },
> /* Novatel Wireless Merlin V620 */
>@@ -341,52 +328,6 @@ MODULE_DEPEND(ubsa, usb, 1, 1, 1);
> MODULE_DEPEND(ubsa, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
> MODULE_VERSION(ubsa, UBSA_MODVER);
>
>-/*
>- * Huawei Exxx radio devices have a built in flash disk which is their
>- * default power up configuration. This allows the device to carry its
>- * own installation software.
>- *
>- * Instead of following the USB spec, and create multiple configuration
>- * descriptors for this, the devices expects the driver to send
>- * UF_DEVICE_REMOTE_WAKEUP to endpoint 2 to reset the device, so it
>- * reprobes, now with the radio exposed.
>- */
>-
>-static usbd_status
>-ubsa_huawei(device_t self, struct usb_attach_arg *uaa) {
>- usb_device_request_t req; usbd_device_handle dev;
>- usb_config_descriptor_t *cdesc;
>-
>- if (self == NULL)
>- return (UMATCH_NONE);
>- if (uaa == NULL)
>- return (UMATCH_NONE);
>- dev = uaa->device;
>- if (dev == NULL)
>- return (UMATCH_NONE);
>- /* get the config descriptor */
>- cdesc = usbd_get_config_descriptor(dev);
>- if (cdesc == NULL)
>- return (UMATCH_NONE);
>-
>- if (cdesc->bNumInterface > 1)
>- return (0);
>-
>- /* Bend it like Beckham */
>- device_printf(self, "Kicking Huawei device into radio mode\n");
>- memset(&req, 0, sizeof req);
>- req.bmRequestType = UT_WRITE_DEVICE;
>- req.bRequest = UR_SET_FEATURE;
>- USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP);
>- USETW(req.wIndex, 2);
>- USETW(req.wLength, 0);
>-
>- /* We get error return, but it works */
>- (void)usbd_do_request(dev, &req, 0);
>- return (UMATCH_NONE);
>-}
>-
>-
> static int
> ubsa_match(device_t self)
> {
>@@ -399,9 +340,6 @@ ubsa_match(device_t self)
> for (i = 0; ubsa_products[i].vendor != 0; i++) {
> if (ubsa_products[i].vendor == uaa->vendor &&
> ubsa_products[i].product == uaa->product) {
>- if (uaa->vendor == USB_VENDOR_HUAWEI &&
>- ubsa_huawei(self, uaa))
>- break;
> return (UMATCH_VENDOR_PRODUCT);
> }
> }
>@@ -424,9 +362,6 @@ ubsa_attach(device_t self)
> dev = uaa->device;
> ucom = &sc->sc_ucom;
>
>- if (uaa->vendor == USB_VENDOR_HUAWEI)
>- sc->sc_huawei = 1;
>-
> /*
> * initialize rts, dtr variables to something
> * different from boolean 0, 1
>@@ -575,8 +510,6 @@ ubsa_request(struct ubsa_softc *sc, u_in
> usbd_status err;
>
> /* The huawei Exxx devices support none of these tricks */
>- if (sc->sc_huawei)
>- return (0);
> req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
> req.bRequest = request;
> USETW(req.wValue, value);
>
>Modified: head/sys/dev/usb/usbdevs
>==============================================================================
>--- head/sys/dev/usb/usbdevs Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/dev/usb/usbdevs Thu Oct 9 21:25:01 2008 (r183735)
>@@ -1434,7 +1434,7 @@ product HTC SMARTPHONE 0x0a51 SmartPhon
>
> /* HUAWEI products */
> product HUAWEI MOBILE 0x1001 Huawei Mobile
>-product HUAWEI E270 0x1003 Huawei HSPA modem
>+product HUAWEI E220 0x1003 Huawei HSDPA modem
>
> /* HUAWEI 3com products */
> product HUAWEI3COM WUB320G 0x0009 Aolynk WUB320g
>
>Modified: head/sys/i386/conf/GENERIC
>==============================================================================
>--- head/sys/i386/conf/GENERIC Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/i386/conf/GENERIC Thu Oct 9 21:25:01 2008 (r183735)
>@@ -304,6 +304,7 @@ device urio # Diamond
>Rio 500 MP3 play
> device uscanner # Scanners
> # USB Serial devices
> device ucom # Generic com ttys
>+device u3g # USB-based 3G modems (Option, Huawei, Sierra)
> device uark # Technologies ARK3116 based serial adapters
> device ubsa # Belkin F5U103 and compatible
> serial adapters
> device uftdi # For FTDI usb serial adapters
>
>Modified: head/sys/modules/Makefile
>==============================================================================
>--- head/sys/modules/Makefile Thu Oct 9 20:51:25 2008 (r183734)
>+++ head/sys/modules/Makefile Thu Oct 9 21:25:01 2008 (r183735)
>@@ -269,6 +269,7 @@ SUBDIR= ${_3dfx} \
> twe \
> tx \
> txp \
>+ u3g \
> uark \
> uart \
> ubsa \
>
>Added: head/sys/modules/u3g/Makefile
>==============================================================================
>--- /dev/null 00:00:00 1970 (empty, because file is newly added)
>+++ head/sys/modules/u3g/Makefile Thu Oct 9 21:25:01
>2008 (r183735)
>@@ -0,0 +1,8 @@
>+# $FreeBSD$
>+
>+.PATH: ${.CURDIR}/../../dev/usb
>+
>+KMOD= u3g
>+SRCS= u3g.c ucomvar.h opt_usb.h device_if.h bus_if.h usbdevs.h
>+
>+.include <bsd.kmod.mk>
>_______________________________________________
>svn-src-all at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/svn-src-all
>To unsubscribe, send any mail to "svn-src-all-unsubscribe at freebsd.org"
>
>-------------------------------------------------------
>_______________________________________________
>freebsd-current at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list