Call for testers: Atheros AR8121(L1E)/AR8113/AR8114(L2E)
ethernet
Josh Carroll
josh.carroll at gmail.com
Mon Dec 8 13:23:18 PST 2008
> Device is L1E embedded on the PCI-e bus on my motherboard....I suspect
> that is the problem.
>
> Thanks,
> Steve
Which motherboard? I have an Asus P5Q Pro, and it's being recognized
properly on RELENG_7_1:
% grep ale /var/run/dmesg.boot
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f
mem 0xfeac0000-0xfeafffff irq 17 at device 0.0 on pci2
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
ale0: 4GB boundary crossed, switching to 32bit DMA addressing mode.
miibus0: <MII bus> on ale0
ale0: Ethernet address: 00:23:54:31:7f:5b
ale0: [FILTER]
relevant pciconf -lv output:
ale0 at pci0:2:0:0: class=0x020000 card=0x82261043 chip=0x10261969
rev=0xb0 hdr=0x00
vendor = 'Attansic (Now owned by Atheros)'
class = network
subclass = ethernet
iperf (ale0 as -s): [ 3] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec
iperf (ale0 as -c): [ 3] 0.0-10.0 sec 1.08 GBytes 931 Mbits/sec
So all seems well here.
Josh
More information about the freebsd-current
mailing list