Samsung G600 won't connect!

[Jayton Garnett]

Hi all,

Anyone had any luck mounting the memory card inside a Samsung G600 on 
FreeBSD 6.2/6.3PR?
My Samsung G600 when plugged in does not create any da* devices in /dev 
as other USB memory sticks/cards do.
My old Motorola L7 SLVR was mounted as a da device, but  this Samsung 
G600 won't and it's really annoying.

Here is the output of usbdevs -v

jayton# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), 
nVidia(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered
 port 9 powered
 port 10 addr 2: low speed, power 100 mA, config 1, Optical USB 
Mouse(0xc016), Logitech(0x046d), rev 3.40
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), 
nVidia(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered
 port 9 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x0606), 
vendor 0x05e3(0x05e3), rev 7.02
  port 1 addr 3: high speed, power 500 mA, config 1, SAMSUNG SGHG600 USB 
Device(0x0904), SAMSUNG(0x09fc), rev 0.00
  port 2 powered
  port 3 powered
  port 4 powered
 port 10 powered


So it is detected, great! I tried my USB stick, works fine, my Motorola, 
works fine... change back to this phone and nothing!
Argh! Would this be a FreeBSD or Samsung issue? I'm thinking maybe Samsung
I've contacted Samsung but I doubt they will know. It connects straight 
away under XP.

-- 
Kind Regards,
Jayton Garnett
Http://www.uberhacker.co.uk