kern/54500: enabling WEP in USR2410 Wifi card has no effect

[Jose Rey]

>Number:         54500
>Category:       kern
>Synopsis:       enabling WEP in USR2410 Wifi card has no effect
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jul 15 05:30:14 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator:     Jose Rey
>Release:        FreeBSD 4.8-STABLE i386
>Organization:
>Environment:
System: FreeBSD main.v2project.com 4.8-STABLE FreeBSD 4.8-STABLE #0: Wed Jun 25 08:05:57 CEST 2003 king at main.labs.v2project.com:/dat/usr/src/sys/compile/MAIN i386
>Description:
	This problem is similar to kern/53940
	
	Enabling WEP in a USR2410 Intersil Prism card, has no effect and WEP become unactivated,
	
	kernel: wi0: 802.11 address: 00:90:d1:06:53:fd
	kernel: wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
	kernel: wi0: Intersil Firmware: Primary 0.03.00, Station 1.04.09
	kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe9000000-0xe90000ff irq 9 a t device 9.0 on pci0
	
	wicontrol:

	Station name:                           [ MAIN ]
	SSID for IBSS creation:                 [ v2project ]
	Current netname (SSID):                 [ v2project ]
	Desired netname (SSID):                 [ v2project ]
	Current BSSID:                          [ 00:90:d1:06:53:fd ]
	Channel list:                           [ 8191 ]
	IBSS channel:                           [ 11 ]
	Current channel:                        [ 11 ]
	Comms quality/signal/noise:             [ 0 81 27 ]
	Promiscuous mode:                       [ Off ]
	Process 802.11b Frame:                  [ Off ]
	Intersil-Prism2 based card:             [ 1 ]
	Port type (1=BSS, 3=ad-hoc):            [ 6 ]
	MAC address:                            [ 00:90:d1:06:53:fd ]
	TX rate (selection):                    [ 11 ]
	TX rate (actual speed):                 [ 2 ]
	RTS/CTS handshake threshold:            [ 2347 ]
	Create IBSS:                            [ Off ]
	Access point density:                   [ 1 ]
	Power Mgmt (1=on, 0=off):               [ 0 ]
	Max sleep time:                         [ 100 ]
	WEP encryption:                         [ On ]
	TX encryption key:                      [ 1 ]
	Encryption keys:                        [ 12345 ][  ][  ][  ]


	ifconfig wi0
	wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        	inet6 fe80::290:d1ff:fe06:53fd%wi0 prefixlen 64 scopeid 0x1 
        	inet 10.168.192.1 netmask 0xffffffc0 broadcast 10.168.192.63
        	ether 00:90:d1:06:53:fd
        	media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap>
        	status: associated
        	ssid v2project 1:v2project
        	stationname MAIN
        	channel 11 authmode OPEN powersavemode OFF powersavesleep 100
        	wepmode MIXED weptxkey 1
        	wepkey 1:64-bit

	ping from one client without wep are sucessfull

>How-To-Repeat:
	Activate WEP and ping from an asociated node
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: