Asus bluetooth device - 0x1712

[Da Rock]

On 06/15/11 09:47, Maksim Yevmenkin wrote:
> On Tue, Jun 14, 2011 at 4:39 PM, Da Rock
> <freebsd-bluetooth at herveybayaustralia.com.au>  wrote:
>    
>> On 06/15/11 06:17, Iain Hibbert wrote:
>>      
>>> On Tue, 14 Jun 2011, Da Rock wrote:
>>>
>>>
>>>        
>>>>> first, question: did you load ng_ubt(4) driver?
>>>>>
>>>>>
>>>>>            
>>>> Naturally. Its in the handbook, and you never discount the handbook :)
>>>>
>>>>          
>>>>> if you did  and device is still not recognized, could you please dump
>>>>> device descriptor, i.e. use usbconfig(8) dump_device_desc command
>>>>>
>>>>>
>>>>>            
>>>> ugen5.2:<product 0x1712 vendor 0x0b05>    at usbus5, cfg=0 md=HOST spd=FULL
>>>> (12Mbps) pwr=ON
>>>>
>>>>    bDeviceClass = 0x00e0
>>>>    bDeviceSubClass = 0x0001
>>>>    bDeviceProtocol = 0x0001
>>>>
>>>>          
>>> seems like the ng_ubt driver should attach to this directly..
>>>
>>>        
>> Probably would if it recognised the product then. What is the correct way to
>> do this then? I know about usbdevs, and the awk script to run, but does
>> anything then need to be added to the driver to pick it up, or should that
>> be all thats needed?
>>      
> it does not look at the product. it looks at interface class, subclass
> and protocol. are you sure you are loading ng_ubt(4) from loader.conf?
> are there any error messages from ng_ubt(4) in /var/log/messages?
>    
devd.conf problem then? I haven't got it in loader.conf, but I did 
kldload- dmesg output (although the last 2 lines disappear when 
unloaded/loaded:

ubt0: <vendor 0x0b05 product 0x1712, class 224/1, rev 2.00/19.15, addr 
2> on usbus5
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()

But ls dev shows no devices, and I can't start bluetooth services:

/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0

If it should work, then what am I doing wrong?
>    
>>>
>>>        
>>>>>>> I'm currently learning about this technology (I know, late bloomer
>>>>>>> and all... :) ) and its various features- which are why I'm
>>>>>>> looking carefully at it now for my current needs. Unfortunately
>>>>>>> its the advanced features which I really need :( So if I can help
>>>>>>> advance things I will.
>>>>>>>
>>>>>>>
>>>>>>>                
>>>>>> what advanced features do you need?
>>>>>>
>>>>>>
>>>>>>              
>>>> I'm a little new to jargon, but the features are stereo audio, better
>>>> bitrates, remote control, phone control, etc (HSP, EDR, AV-something or
>>>> rather
>>>> I think at least). Basically all the cool media stuff available now that
>>>> wasn't around with 1.x. Thats what has grabbed my interest now anyway,
>>>> file
>>>> transfer, dun... meh- I can do that with wifi.
>>>>
>>>>          
>>> better bitrates should be supported natively (not sure about the 3.0 HS
>>> speeds, perhaps that requires extra work?) and the parts that would not be
>>> supported from the top of my head would be "Secure Simple Pairing" and
>>> reliable L2CAP channels, most of the rest is just operating over
>>> normal L2CAP/RFCOMM sockets anyway..
>>>
>>> the Advanced Audio I have wanted to do for some time as an audio daemon
>>> but never got around to starting (not sure actually, how complex it will
>>> be - for FreeBSD it would require something like the NetBSD pad(4) driver
>>> to be added also).. the Heaset will actually use SCO sockets for audio,
>>> which I think FreeBSD does support and there is some code in NetBSD that
>>> handles it (via a special kernel audio device, but it should be converted
>>> to use pad(4)). Similarly for Handsfree (there is a bthfp program that I
>>> wrote, basically a proof-of-concept rather than being greatly useful)
>>>
>>> not sure how the AV?TP profiles/protocols work, I don't think they are all
>>> that complex, it might be that they can represent as a HID profile or if
>>> it needs to be tied somewhat into a media player software. It does sound
>>> interesting, but I rarely use media from my computer and have never found
>>> a need..
>>>
>>>        
>> I'll have a look at all that then, the media control is a HID profile
>> btw(found that by accident looking into a IR remote and HID keyboard oddly
>> enough).
>>      
>>> I was actually looking at a Bluetooth capable printer (HP 470) on ebay the
>>> other day, because I'm sick of using a BJ10 and I hate wires, though the
>>> price seemed a little out of my range..
>>>
>>> btw all the specifications are available from www.bluetooth.com :)
>>>
>>>        
>> Thanks Iain, I'll check it out :)
>>      
>>> iain
>>>
>>>        
>> _______________________________________________
>> freebsd-bluetooth at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
>> To unsubscribe, send any mail to "freebsd-bluetooth-unsubscribe at freebsd.org"
>>
>>