Can't l2ping to BT device

[Marek Salwerowicz]

Hi all,

'hccontrol inquiry' discovers the device I want to connect to, but l2ping 
can't ping to it:


vv1% hccontrol inquiry
Inquiry result, num_responses=1
Inquiry result #0
        BD_ADDR: FF2
        Page Scan Rep. Mode: 0x1
        Page Scan Period Mode: 00
        Page Scan Mode: 00
        Class: 00:1f:00
        Clock offset: 0x77cd
Inquiry complete. Status: No error [00]


vv1% l2ping -a FF2
0 bytes from FF2 seq_no=0 time=5127.835 ms result=0x4
0 bytes from FF2 seq_no=1 time=5128.129 ms result=0x4
0 bytes from FF2 seq_no=2 time=5127.133 ms result=0x4
0 bytes from FF2 seq_no=3 time=5128.159 ms result=0x4
^C
vv1%


it's a new pair, so I typed config in hcsecd.conf:

device {
        bdaddr  00:06:66:00:e2:84; # 'FF2' results in syntax error, need to 
be MAC address
        name    "so51-FF2";
        key     nokey;
        pin     "1234";
}
and then restarted hcsecd

during l2ping'ing hcsecd throws only this message:

hcsecd[2315]: Received unexpected HCI event, event=0xff


# hcidump :

vv1% # hcidump
HCIDump - HCI packet analyzer ver 1.5
device: any snap_len: 65535 filter: 0xffffffffffffffff
> HCI Event: Vendor(0xff) plen 2
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Vendor(0xff) plen 2
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Vendor(0xff) plen 2
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Vendor(0xff) plen 2
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Vendor(0xff) plen 2
> HCI Event: Connect Complete(0x03) plen 11
^C
vv1%


l2ping from other machine (stays next to vv1) to FF2 works great - the 
config is the same


regards,

-- 
Marek