Supported devices? vid/pid 0x1131/0x1001 and 0x0a5c/0x2100

[Wayne Sierke]

Hi,

I've got a couple of bluetooth USB adapters here and tried them out
recently on this i386 7-STABLE GENERIC kernel. I'm sure I had at least
one of them working previously, however neither of them seem to work
with ng_ubt(4):

ubt0: <Broadcom Corp BCM92045DG-Flash_UHE, class 224/1, rev 2.00/1.00, addr 4> on uhub6
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320
Unknown USB device: vendor 0x0a5c product 0x2100 bus uhub6
ubt_bulk_in_complete2: ubt0 - Bulk-in xfer failed, STALLED (17). No new xfer will be submitted!
ubt_intr_complete2: ubt0 - Interrupt xfer failed, IOERROR (13). No new xfer will be submitted!

and also

ubt0: <vendor 0x1131 product 0x1001, class 224/1, rev 1.10/1.34, addr 3> on uhub4
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 2) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=17; nframes=16, buffer size=272
Unknown USB device: vendor 0x1131 product 0x1001 bus uhub4
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()

But in the archives it looks as though others have used both of these
adapters successfully before.

e.g. Mihai Tanasescu reported in Aug 2007:
        2. usbdevs -dv (freezes for about 1-2 seconds while displaying the first device):
        
        Controller /dev/usb0:
        addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
        VIA(0x0000), rev 1.00
          uhub0
         port 1 addr 2: full speed, self powered, config 1, ISSCBTA(0x1001), 
        vendor 0x1131(0x1131), rev 3.73
           ubt0
        

and Bruce Cran reported in Sep 2007:
        ubt0: <Broadcom Corp BCM92045DG Non-UHE, class 224/1, rev 2.00/0.00, addr 2> on uhub1
        ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
        ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; 
        wMaxPacketSize=49; nframes=6, buffer size=294

Admittedly that looks like a slightly different revision of the BCM device.

Has support for these devices been removed or requires patches, etc?

My usbdevs -lv (with the ISSC device attached to hub):

# usbdevs -dv
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
  uhub0
 port 1 addr 2: full speed, self powered, config 1, product 0x0902(0x0902), vendor 0x03eb(0x03eb), rev 1.00
   uhub5
  port 1 addr 3: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc025), B16_b_02(0x046d), rev 98.02
    ums0
  port 2 powered
  port 3 powered
  port 4 addr 4: low speed, power 100 mA, config 1, Logitech USB Keyboard(0xc315), Logitech(0x046d), rev 28.00
    ukbd0
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
  uhub1
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
  uhub2
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), SiS(0x0000), rev 1.00
  uhub3
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x0606), vendor 0x05e3(0x05e3), rev 7.02
   uhub4
  port 1 powered
  port 2 addr 3: full speed, power 100 mA, config 1, product 0x1001(0x1001), vendor 0x1131(0x1131), rev 1.34
    ubt0
  port 3 powered
  port 4 powered
 port 6 powered

In spite of adapters showing as associated with ubt and listed as ubt0,
I don't see any /dev/ubt* devices and /etc/rc.d/bluetooth start ubt0
fails:

        # /etc/rc.d/bluetooth start ubt0
        /etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
        # kldstat
        Id Refs Address    Size     Name
         1   29 0xc0400000 979ad0   kernel
         2    1 0xc0d7a000 5464     vesa.ko
         3    4 0xc0d80000 28678    linux.ko
         4    1 0xc0da9000 6f88     snd_ich.ko
         5    2 0xc0db0000 4a62c    sound.ko
         6    1 0xc0dfb000 4e0ef0   nvidia.ko
         7    1 0xc12dc000 6a2c4    acpi.ko
         8    1 0xc5171000 7000     linprocfs.ko
         9    1 0xc5454000 2000     green_saver.ko
        10    1 0xc52e8000 2000     rtc.ko
        11    1 0xc5f9f000 7000     ng_ubt.ko
        12    5 0xc5fa6000 b000     netgraph.ko
        13    4 0xc5fd6000 2000     ng_bluetooth.ko
        14    1 0xc5fd8000 d000     ng_hci.ko
        15    1 0xc5ff2000 f000     ng_l2cap.ko
        16    1 0xc6001000 1a000    ng_btsocket.ko
        17    1 0xc601b000 4000     ng_socket.ko
        
Thanks for any guidance!


Wayne