Problem transfering from LG phone

[Ray Newman]

On (uname -a) FreeBSD pup.local 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat Jun 24
15:09:05 EST 2006     root at pup.local:/usr/src/sys/i386/compile/SPECIFIC  i386

I have the following bt related tasks running:

   487  ??  Is     0:00.00 /usr/sbin/hcsecd -f /etc/bluetooth/hcsecd.conf
   526  ??  Is     0:00.00 /usr/sbin/sdpd -c /var/run/sdp -g nobody -u nobody
91212  ??  Ss     0:00.00 obexapp -s -C 1

hcidump gives the following when I try to transfer an image from my
LG U8360 phone:

HCIDump - HCI packet analyzer ver 1.5
device: any snap_len: 65535 filter: 0xffffffff
 > HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
 > HCI Event: Command Status(0x0f) plen 4
 > HCI Event: Role Change(0x12) plen 8
 > HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
 > HCI Event: Command Complete(0x0e) plen 10
 > HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
 > HCI Event: Max Slots Change(0x1b) plen 3
 > HCI Event: Command Complete(0x0e) plen 6
 > ACL data: handle 0x0007 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0007 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0040 result 0 status 0
 > ACL data: handle 0x0007 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0007 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0007 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
 > ACL data: handle 0x0007 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
 > HCI Event: Number of Completed Packets(0x13) plen 5
 > ACL data: handle 0x0007 flags 0x02 dlen 25
     L2CAP(d): cid 0x41 len 21 [psm 1]
         SDP SSA Req: tid 0x1 len 0x10
           pat uuid-16 0x1106 (OBEXObjTrnsf)
           max 0x2a0
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 0x0007 flags 0x02 dlen 15
     L2CAP(d): cid 0x40 len 11 [psm 1]
         SDP SSA Rsp: tid 0x1 len 0x6
           cnt 0x3
           cont 00
 > ACL data: handle 0x0007 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0041 scid 0x0040
< ACL data: handle 0x0007 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0040
 > HCI Event: Number of Completed Packets(0x13) plen 5
 > HCI Event: Number of Completed Packets(0x13) plen 5
 > HCI Event: Disconn Complete(0x05) plen 4

Would someone please let me know what I am doing wrong.


Ray