BCM2035

[Oliver]

Maksim

Sorry for the delay of this thread.

> i'm not aware of any hci command that would allow you to re/set bd_addr. 
> i'm interested to know what did you do to make it forget its bd_addr.

Just casted normal commands, the initialitation ones, inquiry process, set 
auth / encrypt, get link keys and the maximun possible, write the class of 
device, i am suspecting of those last ones.

Another of my suspects could be the casting of the RESET command before init 
process of the device... for this concrete chip...

The device is working but as it identifies itself as a null BD_ADDR inquiry 
of other devices don't catch it, but is possible to work with in all other 
features/commands. And as I could see the replies to the post i did in the 
BlueZ stack maillist you can even work with it if you start the connection 
process..

As well I commented in the BlueZ maillist there is some info about how to 
set the BD_ADDR to an "Ericsson ROK 101"

> HCI Command: ogf 0x3f, ocf 0x000d, plen 6
> HCI Command: ogf 0x3f, ocf 0x0022, plen 0

If I dont find any solution or info form broadcom i would start to cast 
commands in this range... but if it is a combination of more than 1 command 
it is quite impossible to get it. With only 1 command, more possibilities to 
end up with it than fixing but...

Any advice, hint about this?


> i'm afraid there is nothing on top of my head right now :( i will need to 
> have the device itself to run some tests. i will see if i can purchase it 
> locally and let you know.

really really weird.....

thanks a lot! 


		
______________________________________________ 
Renovamos el Correo Yahoo! 
Nuevos servicios, más seguridad 
http://correo.yahoo.es