patm, idt, ipfw - next adentures

Harti Brandt brandt at fokus.fraunhofer.de
Mon Oct 6 03:10:32 PDT 2003 

On Fri, 3 Oct 2003, Franky wrote:

Does that mean it works without ipfw?

harti

F>> I do not understand why your HW is always requesting for more buffers !!
F>Have
F>> you done something special ?
F>> Can you provide more information about your configuration ?
F>> Could you try the same test without ipfw ?
F>This is without ipfw (I removed ipfw from kernel).
F>Configuration:
F>-dmesg
F>Copyright (c) 1992-2003 The FreeBSD Project.
F>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
F>The Regents of the University of California. All rights reserved.
F>FreeBSD 4.9-RC #0: Thu Oct  2 04:16:30 GMT 2003
F>root at ordos.is.net.pl:/usr/src/sys/compile/kernel
F>Timecounter "i8254"  frequency 1193182 Hz
F>Timecounter "TSC"  frequency 701594438 Hz
F>CPU: Intel Celeron (701.59-MHz 686-class CPU)
F>Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
F>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
F>real memory  = 267300864 (261036K bytes)
F>avail memory = 254853120 (248880K bytes)
F>Preloaded elf kernel "kernel" at 0xc02b4000.
F>Pentium Pro MTRR support enabled
F>Using $PIR table, 10 entries at 0xc00f1360
F>npx0: <math processor> on motherboard
F>npx0: INT 16 interface
F>pcib0: <Host to PCI bridge> on motherboard
F>pci0: <PCI bus> on pcib0
F>agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem
F>0xfa000000-0xfa07ffff,0xfc000000-0xfdffffff irq
F>pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
F>pci1: <PCI bus> on pcib1
F>fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem
F>0xf9000000-0xf90fffff,0xf9800000-0xf9800
F>fxp0: Ethernet address 00:03:47:b0:68:17
F>inphy0: <i82555 10/100 media interface> on miibus0
F>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
F>proatm0: <PROSUM PROATM adapter> port 0xd400-0xd4ff mem
F>0xfb000000-0xfb3fffff,0xf8800000-0xf8800fff
F>proatm0: ATM card is PROATM-155 or IDT, PHY=PM5346 or IDT77155
F>proatm0: 128K words of RAM up to 4096 PVC
F>proatm0: MAC address 00:c0:fd:00:7b:a0, HWrev=6
F>pci1: <unknown card> (vendor=0x14d2, dev=0xa003) at 12.0 irq 7
F>pci1: <unknown card> (vendor=0x14d2, dev=0xa004) at 12.1 irq 7
F>fxp1: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem
F>0xf5800000-0xf58fffff,0xf6000000-0xf6000
F>fxp1: Ethernet address 00:03:47:ac:76:1d
F>inphy1: <i82555 10/100 media interface> on miibus1
F>inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
F>isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
F>isa0: <ISA bus> on isab0
F>atapci0: <Intel ICH2 ATA100 controller> port 0x9800-0x980f at device 31.1 on
F>pci0
F>ata0: at 0x1f0 irq 14 on atapci0
F>ata1: at 0x170 irq 15 on atapci0
F>pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
F>orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
F>pmtimer0 on isa0
F>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
F>atkbd0: <AT Keyboard> irq 1 on atkbdc0
F>kbd0 at atkbd0
F>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
F>sio0: type 16550A
F>sio1 at port 0x2f8-0x2ff irq 3 on isa0
F>sio1: type 16550A
F>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
F>sc0: <System console> at flags 0x100 on isa0
F>sc0: VGA <16 virtual consoles, flags=0x300>
F>ad0: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata0-master UDMA66
F>Mounting root from ufs:/dev/ad0s1a
F>proatm0: txopen UBR connection for 0/140
F>proatm0: proatm_openvcc: 0/140, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/141
F>proatm0: proatm_openvcc: 0/141, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/142
F>proatm0: proatm_openvcc: 0/142, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/143
F>proatm0: proatm_openvcc: 0/143, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/144
F>proatm0: proatm_openvcc: 0/144, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/145
F>proatm0: proatm_openvcc: 0/145, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/146
F>proatm0: proatm_openvcc: 0/146, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/147
F>proatm0: proatm_openvcc: 0/147, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/148
F>proatm0: proatm_openvcc: 0/148, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/149
F>proatm0: proatm_openvcc: 0/149, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/150
F>proatm0: proatm_openvcc: 0/150, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/151
F>proatm0: proatm_openvcc: 0/151, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/152
F>proatm0: proatm_openvcc: 0/152, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/153
F>proatm0: proatm_openvcc: 0/153, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/154
F>proatm0: proatm_openvcc: 0/154, PCR=15000, SCR=15000
F>proatm0: txopen UBR connection for 0/155
F>proatm0: proatm_openvcc: 0/155, PCR=15000, SCR=15000
F>proatm0 BUFFER STATUS: small=276/510, large=309/510.
F>proatm0 BUFFER STATUS: small=316/510, large=310/510.
F>proatm0 BUFFER STATUS: small=266/510, large=295/510.
F>proatm0 BUFFER STATUS: small=298/510, large=300/510.
F>proatm0 BUFFER STATUS: small=277/510, large=304/510.
F>proatm0 BUFFER STATUS: small=256/510, large=283/510.
F>proatm0 BUFFER STATUS: small=276/510, large=272/510.
F>proatm0 BUFFER STATUS: small=295/510, large=305/510.
F>proatm0 BUFFER STATUS: small=305/510, large=274/510.
F>proatm0 BUFFER STATUS: small=273/510, large=263/510.
F>proatm0 BUFFER STATUS: small=283/510, large=288/510.
F>proatm0 BUFFER STATUS: small=294/510, large=275/510.
F>proatm0 BUFFER STATUS: small=276/510, large=301/510.
F>proatm0 BUFFER STATUS: small=268/510, large=315/510.
F>proatm0 BUFFER STATUS: small=313/510, large=281/510.
F>proatm0 BUFFER STATUS: small=280/510, large=308/510.
F>proatm0 BUFFER STATUS: small=287/510, large=264/510.
F>proatm0 BUFFER STATUS: small=299/510, large=304/510.
F>proatm0 BUFFER STATUS: small=314/510, large=301/510.
F>proatm0 BUFFER STATUS: small=271/510, large=293/510.
F>-kernel config
F>machine         i386
F>cpu             I686_CPU
F>ident           kernel
F>maxusers        0
F>
F>options         INET                    #InterNETworking
F>options         FFS                     #Berkeley Fast Filesystem
F>options         SOFTUPDATES
F>options         UFS_DIRHASH             #Improve performance on big
F>directories
F>options         PROCFS                  #Process filesystem
F>options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
F>THIS!]
F>options         SYSVSHM                 #SYSV-style shared memory
F>options         SYSVMSG                 #SYSV-style message queues
F>options         SYSVSEM                 #SYSV-style semaphores
F>options         P1003_1B                #Posix P1003_1B real-time extensions
F>options         _KPOSIX_PRIORITY_SCHEDULING
F>options         ICMP_BANDLIM            #Rate limit bad replies
F>options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
F>
F>device          proatm0
F>options         ATM_CORE
F>options         ATM_IP
F>options         ATM_SIGPVC
F>#options                LIBMCHAIN
F>
F>#options                HZ=1000
F>#options                DEVICE_POLLING
F>options         PANIC_REBOOT_WAIT_TIME=9
F>#options                IPFW2
F>#options                IPFIREWALL
F>#options                IPDIVERT
F>#options                IPFIREWALL_FORWARD
F>#options                IPFIREWALL_DEFAULT_TO_ACCEPT
F>#options                DUMMYNET
F>#options                IPSTEALTH
F>#options         PPP_BSDCOMP
F>#options         PPP_DEFLATE
F>#options         PUC_FASTINTR
F>
F>options         NMBCLUSTERS=65536
F>options         NBUF=8192
F>
F>device          isa
F>device          pci
F>device          ata0    at isa? port IO_WD1 irq 14
F>device          ata1    at isa? port IO_WD2 irq 15
F>device          ata
F>device          atadisk                 # ATA disk drives
F>options         ATA_STATIC_ID           #Static device numbering
F>device          atkbdc0 at isa? port IO_KBD
F>device          atkbd0  at atkbdc? irq 1 flags 0x0
F>device          psm0    at atkbdc? irq 12
F>
F>device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
F>device          sio1    at isa? port IO_COM2 irq 3
F>#device         puc
F>
F>device          vga0    at isa?
F>device          sc0     at isa? flags 0x100
F>device          agp             # support several AGP chipsets
F>device          npx0    at nexus? port IO_NPX irq 13
F>
F>#device         de              # DEC/Intel DC21x4x (``Tulip'')
F>device          fxp
F>device          miibus          # MII bus support
F>#device         rl              # RealTek 8129/8139
F>device          sis             # Silicon Integrated Systems SiS 900/SiS
F>7016
F>
F>pseudo-device   loop            # Network loopback
F>pseudo-device   ether           # Ethernet support
F>pseudo-device   pty             # Pseudo-ttys (telnet etc)
F>pseudo-device   bpf             #Berkeley packet filter
F>#pseudo-device  tun
F>#pseudo-device  ppp
F>-hardware
F>cpu: intel Celeron 700Mhz
F>mainboard: ASUS CULS2 (i815e)
F>memory: SDRAM 256Mb
F>network interfaces: 2 x Intel 82559 Pro/100
F>atm interaface: 1 x PROSUM PROATM-155
F>hdd: IBM-DJNA-351520 15Gb ATA
F>
F>
F>
F>
F>
F>________________________________________________
F>http://www.is.net.pl
F>
F>_______________________________________________
F>freebsd-atm at freebsd.org mailing list
F>http://lists.freebsd.org/mailman/listinfo/freebsd-atm
F>To unsubscribe, send any mail to "freebsd-atm-unsubscribe at freebsd.org"
F>

-- 
harti brandt,
http://www.fokus.fraunhofer.de/research/cc/cats/employees/hartmut.brandt/private
brandt at fokus.fraunhofer.de, harti at freebsd.org

More information about the freebsd-atm mailing list