bootverbose Test-session Re: Driver for Raspberry Pi 4 PCI-express controller
Klaus Küchemann
maciphone2 at googlemail.com
Fri May 29 05:00:16 UTC 2020
> Am 29.05.2020 um 05:07 schrieb Klaus Küchemann <maciphone2 at googlemail.com>:
>
>
> ...
>
> O.K., here is a funny bootverbose test-session (using Original rpi-power adaptor 3A & UPS(Uninterruptible power supply ) :
>
> …….blablabla….
> Tonight there was absolutely no way to get the keyboard to work what let me assume that the filesystem (or u-boot) or eventually some hardware-chip was „attacked“ by these tests…
>
Yep(filesystem was „attacked“ by tests),
after „renewing“ the (msdos-)root-filesystem(incl.. U-boot.bin) on the uSD , `got the keyboard/mouse back to responding state (keyboard/mouse-response on HDMI while no simultaneously access to UART-console-keyboard-input(using picocom)…
And (!) detaching and then reattaching the keyboard/mouse suddenly gives simultaneously access on picocom and HDMI-console) , last test for today: third trial ofunplug/replug keyboard/mouse worked so this was a good test, which let me assume that after some fixes Robert`s pcie-driver will be ready for review on phabricator...
—
…
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
…
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
…
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
pcib0: hardware identifies as revision 0x304.
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
pcib0: bcm_pcib_alloc_resource FAIL: type=3, rid=36, start=00000000f8000000, end=00000000f80fffff, count=0000000000100000, flags=40
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> irq 78 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
…
usbus0: 5.0Gbps Super Speed USB v3.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
…
uhub0: 5 ports with 4 removable, self powered
…
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/samba4 /usr/local/llvm80/lib
…
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: uhub0: 5 ports wit
…
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
…
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
..
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Starting devd.
..
uhub0: 5 ports with 4 removable, self powered
..
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus0
uhub2 on uhub1
uhub2: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.20, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0
ugen0.5: <Mitsumi Electric Apple Extended USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus0
kbd1 at ukbd0
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0 (disconnected)
Starting dhclient.
ugen0.4: <SIGMACHIP Usb Mouse> at usbus0
…
ums0 on uhub2
ums0: <SIGMACHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub2
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.20, addr 4> on usbus0
Autoloading module: uhid.ko
Autoloading module: wmt.ko
Autoloading module: uhid.ko
Autoloading module: ums.ko
Starting ums0 moused.
—
Hotplugging USB-stick :
ugen0.6: <SanDisk Ultra USB 3.0> at usbus0
umass0 on uhub0
umass0: <SanDisk Ultra USB 3.0, class 0/0, rev 3.00/1.00, addr 5> on usbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <SanDisk Ultra USB 3.0 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C530000260314105595
da0: 400.000MB/s transfers
da0: 29327MB (60062500 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0s2: invalid disklabel.
--
More information about the freebsd-arm
mailing list