freebsd-arm Digest, Vol 724, Issue 3

[Ross Alexander]

> On 2020-Mar-14, at 21:12, bob prohaska <fbsd at www.zefox.net> wrote:
>
>> Tried to boot a kernel built from r358976 on a Pi3 and got a panic:
>> [*kaboom* ed.]

Folks,

I've patched u-boot.bin to leave 4 pages of free space at the bottom
of RAM, on the theory that if a little is good, more is better.

I've just finished a self-hosted buildworld/buildkernel of CURRENT to
r359004.  I used

     FreeBSD-13.0-CURRENT-arm64-aarch64-RPI3-20200123-r357002.img

as a starting point.  After reboot on r359004, no sign of the dread
scpi (sp?) errors, I have 4 Cortex A53 cpu, the only anomaly is

     bcm2835_cpufreq0: can't get clock rate (id=8)
     bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM -999MHz, Turbo OFF

Any suggestions?

regards,
Ross

============================================================================
Ross Alexander, (780) 675-6823 desk / (780) 689-0749 cell, rwa at athabascau.ca
                         54.71593 N 113.30835 W

--
This communication is intended for the use of the recipient to whom it is addressed, and may contain confidential, personal, and or privileged information. Please contact us immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communications received in error, or subsequent reply, should be deleted or destroyed.
---