Add Support for Radxa RockPi E

[Aleksandr Rybalko]

Maybe you guys have no that doc yet:
http://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf

By info here, there are indeed two MACs.
First GMAC2IO w/o PHY. External PHY or Ethernet Switch required.
And the second GMAC2PHY connected to internal PHY.


чт, 25 черв. 2020 о 17:49 Aleksandr Rybalko <ray at freebsd.org> пише:

> Hmmm, I see only GMAC (10/100/1000) and PHY(10/100) that can be configured
> as connected to GMAC in Datasheet.
>
> чт, 25 черв. 2020 о 02:17 Sleep Walker <s199p.wa1k9r at gmail.com> пише:
>
>> From TRM
>> ———
>>
>> There are two independent GMAC controllers named GMAC2IO and GMAC2PHY:
>>  GMAC2IO Supports 10/100/1000-Mbps data transfer rates with the RGMII
>> interfaces and Supports 10/100-Mbps data transfer rates with the RMII
>> interfaces
>>  GMAC2PHY Supports 10/100-Mbps data transfer rates with the RMII
>> interfaces
>> ———-
>>
>>
>> Отправлено с iPad
>>
>> > 24 июня 2020 г., в 19:29, Ganbold Tsagaankhuu <ganbold at gmail.com>
>> написал(а):
>> >
>> > On Wed, Jun 24, 2020 at 10:12 PM Furkan Salman <furkan at fkardame.com>
>> wrote:
>> >
>> >> Hello,
>> >>
>> >> I was able to boot FreeBSD on Radxa RockPi E over emmc with the help of
>> >> Sergey (sl199pwa1k9r).
>> >> Details of the device can be found here
>> >> https://wiki.radxa.com/RockpiE/getting_started. It have removable
>> emmc.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> Boot Logs: https://hastebin.com/eyokuqoyif.coffeescript
>> >>
>> >>
>> >>
>> >> Things not working yet:
>> >>
>> >> RK3328 onboard Lan.
>> >>
>> >> Micro-Hdmi connector (Only used for debugging and not MP)
>> >>
>> >> Boot from SD Card, Pin detection fails, Was able to boot into it
>> manually.
>> >>
>> >> As per Sergey, we might need some help understanding how the Lan is
>> >> working on rock64 board using onboard Lan driver.
>> >>
>> >>
>> >>
>> >> Can anyone advice us on how can we add onboard lan driver.
>> >>
>> >>
>> > Their wiki page doesn't say anything about 100M LAN in detail. Maybe it
>> is
>> > better either to ask them or boot linux and see what Ethernet
>> > chipset/controller it says in log/dmesg.
>> >
>> > Ganbold
>> >
>> >
>> >
>> >>
>> >>
>> >> Thanks.
>> >> Furkan K.
>> >> _______________________________________________
>> >> freebsd-arm at freebsd.org mailing list
>> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>> >>
>> > _______________________________________________
>> > freebsd-arm at freebsd.org mailing list
>> > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>> _______________________________________________
>> freebsd-arm at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>
>

-- 
WBW
-------
Rybalko Aleksandr <ray at dlink.ua>
aka Alex RAY <ray at ddteam.net>
D-Link.ua