RockPro64 booting w/ u-boot v2019-rc3
Emmanuel Vadot
manu at bidouilliste.com
Fri Oct 11 10:56:08 UTC 2019
Hi,
On Fri, 11 Oct 2019 03:45:20 -0700 (MST)
Klaus Küchemann via freebsd-arm <freebsd-arm at freebsd.org> wrote:
> Hi,
>
> FreeBSD-13.0-CURRENT-arm64-aarch64-20191004-r353072-memstick.img
When you have some problems with a week old snapshot it's better to
test with latest head.
This was fixed in r353125.
Cheers,
> --
>
> U-Boot TPL 2019.10 (Oct 08 2019 - 07:58:06)
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> U-Boot SPL 2019.10 (Oct 08 2019 - 07:58:06 +0000)
> Trying to boot from MMC1
>
>
> U-Boot 2019.10 (Oct 08 2019 - 07:58:06 +0000)
>
> Model: Pine64 RockPro64
> DRAM: 2 GiB << error/it`s the 4GB-model !!!>>>>>>>
> MMC: dwmmc at fe320000: 1, sdhci at fe330000: 0
> Loading Environment from MMC... Card did not respond to voltage select!
> *** Warning - No block device, using default environment
> Consoles: EFI console
> Reading loader env vars from /efi/freebsd/loader.env
> Setting currdev to disk0p1:
> FreeBSD/arm64 EFI loader, Revision 1.1
> (Fri Oct 4 02:56:02 UTC 2019 root at releng1.nyi.freebsd.org)
> rockchip_dnl_key_pressed: adc_channel_single_shot fail!
> Command line arguments: loader.efi
> EFI version: 2.80autoboot: 0
> EFI Firmware: Das U-Boot (rev 8217.4096)
> Console: efi (0)s #0, OK
> Load Path: /efi\boot\bootaa64.efi
> Load Device:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GP
> T,ddd7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418)efi
> Trying ESP:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GPT,dd
> d7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418)
> Setting currdev to disk0p1:tage select!
> Trying:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(2,GPT,ddd7d2
> 8e-e677-11e9-a9eb-002590ec5bf2,0x1041b,0x1ebe80)
> Setting currdev to disk0p2:
> Loading /boot/defaults/loader.conf
> Loading /boot/device.hintsoad any image
> Loading /boot/loader.confs (18.9 MiB/s)
> Loading /boot/loader.conf.localERR_BADMAGIC
> \
> |_| |_| \___|\___||____/|_____/|_____/
> ```
> `
> ââââââââââââWelcome to FreeBSDâââââââââââââ? s` `.....---.......--.```
> -/
> â â? +o .--` /y:`
> +.
> â 1. Boot Multi user [Enter] â? yo`:. :o
> `+-
> â 2. Boot Single user â? y/ -/` -o/
> â 3. Escape to loader prompt â? .-
> ::/sy+:.
> â 4. Reboot â? / `--
> /
> â â? `:
> :`
> â? Options: â? `:
> :`
> â? 5. Kernel: default/kernel (1 of 1) â? /
> /
> â? 6. Boot Options â? .-
> -.
> â? â? -- -.
> â? â? `:` `:`
> â? â? .-- `--.
> âââââââââââââââââââââââââââââââââââââââââââ? .---.....----.
> Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop
> Loading kernel...
> /boot/kernel/kernel text=0x958e8c data=0x196020+0x7785c4
> syms=[0x8+0x13d3d0+0x8+
> 0x129037]
> Loading configured modules...
> can't find '/boot/entropy'
> Using DTB provided by EFI at 0x80ec000.
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT #0 r353072: Fri Oct 4 03:32:10 UTC 2019
> root at releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC
> arm4
> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM
> 8.0.)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT: init without driver.
> module firmware already present!
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> Starting CPU 4 (100)
> Starting CPU 5 (101)
> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random
> device b.
> random: entropy device external interface
> MAP 7cf1d000 mode 2 pages 1
> MAP 7cf26000 mode 2 pages 1
> MAP 7ff40000 mode 2 pages 16
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on
> ofwbus0
> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem
> 0xff750000-0xff70
> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem
> 0xff760000-0xff760fff o0
> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on
> ofwbus0
> clk_fixed1: <Fixed clock> on ofwbus0
> regfix0: <Fixed Regulator> on ofwbus0
> regfix1: <Fixed Regulator> on ofwbus0
> regfix2: <Fixed Regulator> on ofwbus0
> regfix3: <Fixed Regulator> on ofwbus0
> regfix4: <Fixed Regulator> on ofwbus0
> regfix5: <Fixed Regulator> on ofwbus0
> regfix6: <Fixed Regulator> on ofwbus0
> regfix7: <Fixed Regulator> on ofwbus0
> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff
> on0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> gic0: <ARM Generic Interrupt Controller v3.0> mem
> 0xfee00000-0xfee0ffff,0xfef000
> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on
> gic0
> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 65 on
> rk_p0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 66 on
> rk_p0
> gpiobus1: <OFW GPIO bus> on gpio1
> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 67 on
> rk_p0
> gpiobus2: <OFW GPIO bus> on gpio2
> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 68 on
> rk_p0
> gpiobus3: <OFW GPIO bus> on gpio3
> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 69 on
> rk_p0
> gpiobus4: <OFW GPIO bus> on gpio4
> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
> iicbus0: <OFW I2C bus> on rk_i2c0
> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
> iicbus1: <OFW I2C bus> on rk_i2c1
> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
> iicbus2: <OFW I2C bus> on rk_i2c2
> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
> iicbus3: <OFW I2C bus> on rk_i2c3
> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 70 on iicbus2
> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpufreq_dt0: <Generic cpufreq driver> on cpu0
> cpu1: <Open Firmware CPU> on cpulist0
> cpufreq_dt1: <Generic cpufreq driver> on cpu1
> cpu2: <Open Firmware CPU> on cpulist0
> cpufreq_dt2: <Generic cpufreq driver> on cpu2
> cpu3: <Open Firmware CPU> on cpulist0
> cpufreq_dt3: <Generic cpufreq driver> on cpu3
> cpu4: <Open Firmware CPU> on cpulist0
> cpufreq_dt4: <Generic cpufreq driver> on cpu4
> cpu5: <Open Firmware CPU> on cpulist0
> cpufreq_dt5: <Generic cpufreq driver> on cpu5
> dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff irq 9
> on0
> miibus0: <MII bus> on dwc0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
> rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, o
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, o
> dwc0: Ethernet address: 3e:e5:c3:24:6e:90
> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller
> (RockChip)0
> rockchip_dwmmc0: Hardware version ID is 270a
> mmc0: <MMC/SD bus> on rockchip_dwmmc0
> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff
> ir0
> rk_emmcphy0: got emmcclk clock
> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting
> BRO.
> sdhci_fdt0: 1 slot(s) allocated
> mmc1: <MMC/SD bus> on sdhci_fdt0
> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
> ehci0: Could not set phy to host mode
> panic: lock 0xffff0000413bb140 is not initialized
> cpuid = 0
> time = 1
> KDB: stack backtrace:
> db_trace_self() at db_trace_self_wrapper+0x28
> pc = 0xffff00000071e7b8 lr = 0xffff000000106224
> sp = 0xffff000000010530 fp = 0xffff000000010740
>
> db_trace_self_wrapper() at vpanic+0x18c
> pc = 0xffff000000106224 lr = 0xffff0000003ff2bc
> sp = 0xffff000000010750 fp = 0xffff000000010800
>
> vpanic() at panic+0x44
> pc = 0xffff0000003ff2bc lr = 0xffff0000003ff06c
> sp = 0xffff000000010810 fp = 0xffff000000010890
>
> panic() at lock_destroy+0x44
> pc = 0xffff0000003ff06c lr = 0xffff000000447ffc
> sp = 0xffff0000000108a0 fp = 0xffff0000000108b0
>
> lock_destroy() at usb_bus_mem_free_all+0x34
> pc = 0xffff000000447ffc lr = 0xffff000000288314
> sp = 0xffff0000000108c0 fp = 0xffff0000000108d0
>
> usb_bus_mem_free_all() at generic_ehci_detach+0xb8
> pc = 0xffff000000288314 lr = 0xffff00000075f418
> sp = 0xffff0000000108e0 fp = 0xffff000000010900
>
> generic_ehci_detach() at generic_ehci_fdt_detach+0x1c
> pc = 0xffff00000075f418 lr = 0xffff00000075f800
> sp = 0xffff000000010910 fp = 0xffff000000010950
>
> generic_ehci_fdt_detach() at generic_ehci_fdt_attach+0x26c
> pc = 0xffff00000075f800 lr = 0xffff00000075f7a0
> sp = 0xffff000000010960 fp = 0xffff0000000109b0
>
> generic_ehci_fdt_attach() at device_attach+0x3ec
> pc = 0xffff00000075f7a0 lr = 0xffff000000434d2c
> sp = 0xffff0000000109c0 fp = 0xffff000000010a10
>
> device_attach() at device_probe_and_attach+0x7c
> pc = 0xffff000000434d2c lr = 0xffff0000004348a8
> sp = 0xffff000000010a20 fp = 0xffff000000010a40
>
> device_probe_and_attach() at bus_generic_new_pass+0xec
> pc = 0xffff0000004348a8 lr = 0xffff000000436930
> sp = 0xffff000000010a50 fp = 0xffff000000010a80
>
> bus_generic_new_pass() at bus_generic_new_pass+0xd0
> pc = 0xffff000000436930 lr = 0xffff000000436914
> sp = 0xffff000000010a90 fp = 0xffff000000010ac0
>
> bus_generic_new_pass() at bus_generic_new_pass+0xd0
> pc = 0xffff000000436914 lr = 0xffff000000436914
> sp = 0xffff000000010ad0 fp = 0xffff000000010b00
>
> bus_generic_new_pass() at bus_set_pass+0x8c
> pc = 0xffff000000436914 lr = 0xffff000000432408
> sp = 0xffff000000010b10 fp = 0xffff000000010b40
>
> bus_set_pass() at mi_startup+0x238
> pc = 0xffff000000432408 lr = 0xffff000000398ad4
> sp = 0xffff000000010b50 fp = 0xffff000000010bb0
>
> mi_startup() at virtdone+0x54
> pc = 0xffff000000398ad4 lr = 0xffff000000001084
> sp = 0xffff000000010bc0 fp = 0x0000000000000000
>
> KDB: enter: panic
> [ thread pid 0 tid 100000 ]
> Stopped at 0
> db> help
> This is ddb(4), the kernel debugger; see https://man.FreeBSD.org/ddb/4 for
> help.
> Use "bt" for backtrace, "dump" for kernel core dump, "reset" to reboot.
> Available commands:
> acttrace alltrace b break
> bt c call capture
> continue countfreebufs d delete
> dhwatch dump dwatch examine
> findstack gdb halt hwatch
> kill kldstat match next
> p panic pci_clearerr print
> ps reboot reset run
> s script scripts search
> set show step sysctl
> t textdump thread trace
> unscript until w watch
> watchdog where write x
>
> The following have subcommands; append "help" to list (e.g. "show help"):
> show
> db>
> -----
>
> Regards
> Klaus
>
>
>
> --
> Sent from: http://freebsd.1045724.x6.nabble.com/freebsd-arm-f4199244.html
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
--
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
More information about the freebsd-arm
mailing list