Espressobin anyone ?
Søren Schmidt
soren.schmidt at gmail.com
Sun Aug 18 10:11:17 UTC 2019
Hi Jeffrey
You can unmount the memory disk on /tmp to get at the space on the SD card.
It is however not recommend to use the AD card for random storage, it will wear out fast, that’s why the memory disk is setup.
You could connect a SSD og laptop disk to the SATA interface and use that for the workload.
However compiling is slow, its much much faster to cross compile on a PC…
-Søren
> On 18 Aug 2019, at 00.22, Jeffrey Bowers <khantroll at gmail.com> wrote:
>
> Hi! I've got a new one :)
> I'm trying to do an svn checkout to fix the pkg problem, but it tells me it can't write to a to a temp folder because there is no room left on the device. However, FreeBSD partition is 29GB. It's never also never the same file in TMP that it can't write to. Here is a screenshot of the issue, along with the output of gpart:
>
> <image.png>
>
> Any ideas?
>
> Thanks!
>
> On Sat, Aug 17, 2019 at 2:08 PM Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> On Sat, 17 Aug 2019 17:14:36 +0200
> Søren Schmidt <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>> wrote:
>
> > HI
> >
> > Well, I have a whole forrest of tree?s here, but the error posted here was on a clean checkout.
> >
> > Anyhow, with the latest changes to -stable and the two RF_SHAREABLE patches from -current all works.
>
> I've reverted the commits, see
> https://github.com/evadot/freebsd/commits/a37x0_gpio <https://github.com/evadot/freebsd/commits/a37x0_gpio> for a better way
> to deal with this issue.
> I'm waiting for mmel@ as he wrote the syscon_get_default_handle part.
>
> > It would be nice with the etherswitch changes as well so VLAN tagging etc was standard.
> >
> > -Søren
> >
> > PS: given up on bottom & inline popsting, top posting is all the rage now (yeah I miss elm etc :) )
> >
> > > On 17 Aug 2019, at 15.30, Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >
> > > On Sat, 17 Aug 2019 11:07:22 +0200
> > > Søren Schmidt <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>> wrote:
> > >
> > >> Hi Emmunuel
> > >>
> > >> Yes the 3720 gpio driver I already back ported long ago, its needed, I?m happy its now part of std stable 12!
> > >
> > > Would have been nice of you to say that you were not running a clean
> > > tree.
> > >
> > >> My issue seems to be the inclusion of the phy_usb driver, if I leave that out, I?m back to normal..
> > >
> > > What make you think this is this driver ? What works/doesn't work
> > > with it ? could you provide logs.
> > >
> > >> I?ll have have another go at the latest -stable sources during the weekend and see how it goes.
> > >>
> > >> Thanks for looking into this, with a little cooperation we?ll get this solved for the greater good..
> > >>
> > >> -Søren
> > >
> > > P.S. Please stop top posting, it's really hard to read the conversation
> > >
> > >>> On 16 Aug 2019, at 22.58, Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >>>
> > >>> On Fri, 16 Aug 2019 19:12:30 +0200
> > >>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com> <mailto:manu at bidouilliste.com <mailto:manu at bidouilliste.com>>> wrote:
> > >>>
> > >>>> On Fri, 16 Aug 2019 17:10:37 +0200
> > >>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >>>>
> > >>>>> On Fri, 16 Aug 2019 15:24:54 +0200
> > >>>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >>>>>
> > >>>>>> On Fri, 16 Aug 2019 07:28:59 +0200
> > >>>>>> Søren Schmidt <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>> wrote:
> > >>>>>>
> > >>>>>>> Hi
> > >>>>>>>
> > >>>>>>> Very simple, reverting sys/gnu/dts to what was before 350595 (actually 350592).
> > >>>>>>> Thats what we have svn for ?
> > >>>>>>
> > >>>>>> If I asked how it was to have the svn command that you used, I want to
> > >>>>>> make sure that you didn't revert anything else, like do you have
> > >>>>>> r350596 and r350628 ?
> > >>>>>>
> > >>>>>>> That does make my bananapi work again, no other changes just a recompiled kernel.
> > >>>>>>
> > >>>>>> That + copying the dtb to the fat32 partition ?
> > >>>>>>
> > >>>>>> Can you post the dtb somewhere.
> > >>>>>>
> > >>>>>>> However it does not bring the Espressobin back to life, thats something in one of the ~30 other files that changed between those two revisions.
> > >>>>>>
> > >>>>>> What Linux version of DTS are you using then ? The ones that were in
> > >>>>>> stable/12 when it was branched (4.18) or a later revision ?
> > >>>>>
> > >>>>> So I think that I've found the problem on the Espressobin.
> > >>>>> I think that the problem comes from the simple-mfd driver that I've
> > >>>>> mfc in r350600.
> > >>>>> The pinctrl/gpio controller compatible is
> > >>>>> "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd" and it attaches
> > >>>>> at BUS_PASS_INTERRUPT while the simple_mfd driver attaches at
> > >>>>> BUS_PASS_BUS (so earlier) which means that no gpio controller will be
> > >>>>> available for sdhci to detect the card.
> > >>>>>
> > >>>>> If someone with a non-working espressobin could post a full verbose
> > >>>>> boot log that would help me confirming that this is the case.
> > >>>>> I'll try to find a solution on how to solve this problem.
> > >>>>
> > >>>> So this wasn't the problem but I've found it, see r351129 and r351130
> > >>>>
> > >>>> SD card now work again in HEAD, I'll have a look at stable later next
> > >>>> week.
> > >>>
> > >>> I've did a quick test and I've MFC r348880, r348882 and r349596, the
> > >>> two other commits needed to be mfc'ed are the one I did today on head,
> > >>> I'll do that next week.
> > >>> With them sdcard is working again on stable/12
> > >>>
> > >>>>>>> -Søren
> > >>>>>>>
> > >>>>>>>> On 15 Aug 2019, at 23.37, Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >>>>>>>>
> > >>>>>>>> On Thu, 15 Aug 2019 21:56:23 +0200
> > >>>>>>>> Søren Schmidt <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>> wrote:
> > >>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> Well, I don?t care where you are from and what color you have :)
> > >>>>>>>>>
> > >>>>>>>>> Now, if I update my stable12 sources to r350595 the bananapi breaks, if revert sys/gnu/dts it works again, go figure..
> > >>>>>>>>
> > >>>>>>>> Reverting to what ? and how ?
> > >>>>>>>>
> > >>>>>>>> Because I've just test 12-stable and I have the problem that I've said
> > >>>>>>>> in my previous mail so setting hw.regulator.disable_unused=0 is the
> > >>>>>>>> work around.
> > >>>>>>>> The problem is in twsi not in the DTS so I'm curious how reverting
> > >>>>>>>> only the dts fixes this problem.
> > >>>>>>>>
> > >>>>>>>>> The r351099 fix is already like that in -stable, and not part of the problem.
> > >>>>>>>>>
> > >>>>>>>>> -Søren
> > >>>>>>>>
> > >>>>>>>>>> On 15 Aug 2019, at 21.03, Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> wrote:
> > >>>>>>>>>>
> > >>>>>>>>>> On Thu, 15 Aug 2019 19:48:54 +0200
> > >>>>>>>>>> Søren Schmidt <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>> wrote:
> > >>>>>>>>>>
> > >>>>>>>>>>> Hi Mit!
> > >>>>>>>>>>>
> > >>>>>>>>>>> Right, I suspected that, 12-stable broke many embedded systems between r350592 and r350595 where all the latest and greatest DTS files was pulled in, I guess the same holds for -current.
> > >>>>>>>>>>>
> > >>>>>>>>>>> -Søren
> > >>>>>>>>>>
> > >>>>>>>>>> Mhm it's fun that you think that DTS import is the source of all your
> > >>>>>>>>>> problems, I get it, it's easy to blame the French guy that bulk import
> > >>>>>>>>>> the DTS, he surely don't know what he is doing.
> > >>>>>>>>>> Anyway, two problems were raised in this thread :
> > >>>>>>>>>>
> > >>>>>>>>>> 1) BananaPi (A20) doesn't boot
> > >>>>>>>>>> 2) Espressobin sd support is broken
> > >>>>>>>>>>
> > >>>>>>>>>> I've just looked at the BananaPi problem today, I've fixed a first
> > >>>>>>>>>> problem in r351099.
> > >>>>>>>>>> The main problem is that when we disable the unused regulators we hang
> > >>>>>>>>>> when trying to disabling ldo3. It's weird because the board doesn't use
> > >>>>>>>>>> LDO3 (which is why we are disabling it, it's unused). The problem is in
> > >>>>>>>>>> twsi I think as only leaving the part in axp209 that read the
> > >>>>>>>>>> voltage register value make FreeBSD hang.
> > >>>>>>>>>> I'll have a proper look later, in the meantime you can set
> > >>>>>>>>>> hw.regulator.disable_unused=0
> > >>>>>>>>>> in /boot/loader.conf
> > >>>>>>>>>> This isn't a DTS problem.
> > >>>>>>>>>>
> > >>>>>>>>>> For Espressobin I haven't found any thing related to SD in the DTS
> > >>>>>>>>>> updates since the import, the only things slighly related are mmc and
> > >>>>>>>>>> sdio.
> > >>>>>>>>>> So if someone could find which DTS import broke this I can have a look.
> > >>>>>>>>>>
> > >>>>>>>>>>>
> > >>>>>>>>>>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Yeah, that was the problem. I went back to r348882 and everything worked out of the box.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks again for the hand holding!
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>>
> > >>>>>>>>>>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>>
> > >>>>>>>>>>>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com> <mailto:mw at semihalf.com <mailto:mw at semihalf.com>>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>>
> > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 1:33:04 PM
> > >>>>>>>>>>>> Subject: Re: Espressobin anyone ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> It might simply be broken in -current (again).
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I just updated my stable12 tree and I pulled in new .dts files for just about anything?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Needless to say, it broke the Espressobin?s SD support, it now fails just like yours..
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> It also broke allwinner builds and what not, so I?m just going back in time again :)
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I wonder why there is this overwhelming need to import stuff that breaks things right, left and center in a -stable branch ?
> > >>>>>>>>>>>> That would have earned you the pointy hat back when?.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> -Søren
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Marcin-
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Sorry I didn't reply yesterday. I didn't have any luck with that either. I tried a lot of permutations.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Not saying for 100% it doesn't work, but I couldn't get it to work!
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> From: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com> <mailto:mw at semihalf.com <mailto:mw at semihalf.com>>>
> > >>>>>>>>>>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>>
> > >>>>>>>>>>>> Cc: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>>
> > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 10:41:04 AM
> > >>>>>>>>>>>> Subject: Re: Espressobin anyone ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi Mit,
> > >>>>>>>>>>>> Since you are using the latest 13-current, could you please try if passing rootdev via u-boot bootargs (please see my previous email) works for you without the loader modification?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Best regards,
> > >>>>>>>>>>>> Marcin
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>> napisa?(a):
> > >>>>>>>>>>>> Soren-
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks for the info. I'll grab a couple more SD cards at lunch. This one is a new Samsung 32GB. I'll also try putting the changes into 12 and see if that helps. I'm using the latest 13-current.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Again, appreciate the hand holding!
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>>
> > >>>>>>>>>>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>>
> > >>>>>>>>>>>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com> <mailto:mw at semihalf.com <mailto:mw at semihalf.com>>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>>
> > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 2:30:31 AM
> > >>>>>>>>>>>> Subject: Re: Espressobin anyone ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi Mit
> > >>>>>>>>>>>> Hmm, from your earlier posted dmesgs it looks like the SD card is not getting detected properly..
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I get this output:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > >>>>>>>>>>>> mmc0: <MMC/SD bus> on sdhci_xenon0
> > >>>>>>>>>>>> ?snip?
> > >>>>>>>>>>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH> at mmc0 50.0MHz/4bit/65535-block
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> The problem you see was fixed for me by r348882, maybe it got broken later, I havn?t backported the later changes..
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Have you tried another SD card ? I have found 2 of mine that the espressobin doesn?t like, but works fine with bananapi and friends...
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> -Søren
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Soren-
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks for the code snippet! That will fix one of the problems.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I still can't mount my filesystem, though. I think I'm doing something really simple, wrong. I believe I'm running the latest code and added some printfs to show the kernel setting the regulator:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> usbus1 on ehci0
> > >>>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> > >>>>>>>>>>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) = 19
> > >>>>>>>>>>>> sdhci_xenon0: vqmmc-supply regulator found
> > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > >>>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Could there be a problem with how I am setting up my filesystem? I've tried both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of my SD card:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> root at fbl:~ # gpart list da3
> > >>>>>>>>>>>> Geom name: da3
> > >>>>>>>>>>>> modified: false
> > >>>>>>>>>>>> state: OK
> > >>>>>>>>>>>> fwheads: 255
> > >>>>>>>>>>>> fwsectors: 63
> > >>>>>>>>>>>> last: 62521335
> > >>>>>>>>>>>> first: 3
> > >>>>>>>>>>>> entries: 4
> > >>>>>>>>>>>> scheme: GPT
> > >>>>>>>>>>>> Providers:
> > >>>>>>>>>>>> 1. Name: da3p1
> > >>>>>>>>>>>> Mediasize: 41943040 (40M)
> > >>>>>>>>>>>> Sectorsize: 512
> > >>>>>>>>>>>> Stripesize: 0
> > >>>>>>>>>>>> Stripeoffset: 1536
> > >>>>>>>>>>>> Mode: r0w0e0
> > >>>>>>>>>>>> efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
> > >>>>>>>>>>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
> > >>>>>>>>>>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> > >>>>>>>>>>>> label: (null)
> > >>>>>>>>>>>> length: 41943040
> > >>>>>>>>>>>> offset: 1536
> > >>>>>>>>>>>> type: efi
> > >>>>>>>>>>>> index: 1
> > >>>>>>>>>>>> end: 81922
> > >>>>>>>>>>>> start: 3
> > >>>>>>>>>>>> 2. Name: da3p2
> > >>>>>>>>>>>> Mediasize: 31968979456 (30G)
> > >>>>>>>>>>>> Sectorsize: 512
> > >>>>>>>>>>>> Stripesize: 0
> > >>>>>>>>>>>> Stripeoffset: 41944576
> > >>>>>>>>>>>> Mode: r0w0e0
> > >>>>>>>>>>>> efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
> > >>>>>>>>>>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
> > >>>>>>>>>>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
> > >>>>>>>>>>>> label: (null)
> > >>>>>>>>>>>> length: 31968979456
> > >>>>>>>>>>>> offset: 41944576
> > >>>>>>>>>>>> type: freebsd-ufs
> > >>>>>>>>>>>> index: 2
> > >>>>>>>>>>>> end: 62521335
> > >>>>>>>>>>>> start: 81923
> > >>>>>>>>>>>> Consumers:
> > >>>>>>>>>>>> 1. Name: da3
> > >>>>>>>>>>>> Mediasize: 32010928128 (30G)
> > >>>>>>>>>>>> Sectorsize: 512
> > >>>>>>>>>>>> Mode: r0w0e0
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks!!
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>>
> > >>>>>>>>>>>> To: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com> <mailto:mw at semihalf.com <mailto:mw at semihalf.com>>>
> > >>>>>>>>>>>> Cc: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>>
> > >>>>>>>>>>>> Sent: Tuesday, August 13, 2019 12:55:09 PM
> > >>>>>>>>>>>> Subject: Re: Espressobin anyone ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi
> > >>>>>>>>>>>> That doesn?t seen to work on the espressobin, or least I can?t get it to pick it up.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I use this patch as a workaround:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Index: main.c
> > >>>>>>>>>>>> ===================================================================
> > >>>>>>>>>>>> --- main.c (revision 350496)
> > >>>>>>>>>>>> +++ main.c (working copy)
> > >>>>>>>>>>>> @@ -463,6 +462,13 @@
> > >>>>>>>>>>>> int rv;
> > >>>>>>>>>>>> char *rootdev;
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> +#if defined(__aarch64__)
> > >>>>>>>>>>>> + /* SOS HACK in rootdev, at least Espressobin gets this wrong */
> > >>>>>>>>>>>> + printf("Setting currdev hack\n");
> > >>>>>>>>>>>> + set_currdev("disk0p2");
> > >>>>>>>>>>>> + return (0);
> > >>>>>>>>>>>> +#endif
> > >>>>>>>>>>>> +
> > >>>>>>>>>>>> /*
> > >>>>>>>>>>>> * First choice: if rootdev is already set, use that, even if
> > >>>>>>>>>>>> * it's wrong.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Its not pretty but it does the job until I get time to look into why bootargs aren?t passed / won?t stick, probably something I havn?t backported to my -stable12 sources yet...
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> -Søren
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw at semihalf.com <mailto:mw at semihalf.com> <mailto:mw at semihalf.com <mailto:mw at semihalf.com>>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi,
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Not sure if it's what you are looking for, but in order to autoboot, I
> > >>>>>>>>>>>> simply pass 'rootdev=diskXpY' in the bootargs variable. Here's example from
> > >>>>>>>>>>>> A3720-DB (same should work on EspressoBin):
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Marvell>> set bootargs "rootdev=disk1p1";usb reset; fatload usb 0:1
> > >>>>>>>>>>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
> > >>>>>>>>>>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
> > >>>>>>>>>>>> resetting USB...
> > >>>>>>>>>>>> USB0: Register 2000104 NbrPorts 2
> > >>>>>>>>>>>> Starting the controller
> > >>>>>>>>>>>> USB XHCI 1.00
> > >>>>>>>>>>>> USB1: USB EHCI 1.00
> > >>>>>>>>>>>> - ______ ____ _____ _____
> > >>>>>>>>>>>> | ____| | _ \ / ____| __ \
> > >>>>>>>>>>>> | |___ _ __ ___ ___ | |_) | (___ | | | |
> > >>>>>>>>>>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> > >>>>>>>>>>>> | | | | | __/ __/| |_) |____) | |__| |
> > >>>>>>>>>>>> | | | | | | || | | |
> > >>>>>>>>>>>> |_| |_| \___|\___||____/|_____/|_____/
> > >>>>>>>>>>>> ```
> > >>>>>>>>>>>> `
> > >>>>>>>>>>>> ????????????Welcome to FreeBSD????????????? s` `.....---.......--.```
> > >>>>>>>>>>>> -/
> > >>>>>>>>>>>> ? ? +o .--` /y:`
> > >>>>>>>>>>>> +.
> > >>>>>>>>>>>> ? 1. Boot Multi user [Enter] ? yo`:. :o
> > >>>>>>>>>>>> `+-
> > >>>>>>>>>>>> ? 2. Boot Single user ? y/ -/` -o/
> > >>>>>>>>>>>> ? 3. Escape to loader prompt ? .-
> > >>>>>>>>>>>> ::/sy+:.
> > >>>>>>>>>>>> ? 4. Reboot ? / `--
> > >>>>>>>>>>>> /
> > >>>>>>>>>>>> ? ? `:
> > >>>>>>>>>>>> :`
> > >>>>>>>>>>>> ? Options: ? `:
> > >>>>>>>>>>>> :`
> > >>>>>>>>>>>> ? 5. Kernel: default/kernel (1 of 1) ? /
> > >>>>>>>>>>>> /
> > >>>>>>>>>>>> ? 6. Boot Options ? .-
> > >>>>>>>>>>>> -.
> > >>>>>>>>>>>> ? ? -- -.
> > >>>>>>>>>>>> ? ? `:` `:`
> > >>>>>>>>>>>> ? ? .-- `--.
> > >>>>>>>>>>>> ??????????????????????????????????????????? .---.....----.
> > >>>>>>>>>>>> Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Loading kernel...
> > >>>>>>>>>>>> /boot/kernel/kernel text=0x95047c data=0x1919d0+0x84aa94
> > >>>>>>>>>>>> syms=[0x8+0x13aaa8+0x8+0x12610d]
> > >>>>>>>>>>>> Loading configured modules...
> > >>>>>>>>>>>> can't find '/boot/entropy'
> > >>>>>>>>>>>> Using DTB provided by EFI at 0x8000000.
> > >>>>>>>>>>>> ---<<BOOT>>---
> > >>>>>>>>>>>> KDB: debugger backends: ddb
> > >>>>>>>>>>>> KDB: current backend: ddb
> > >>>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> > >>>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > >>>>>>>>>>>> The Regents of the University of California. All rights reserved.
> > >>>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > >>>>>>>>>>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64
> > >>>>>>>>>>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM
> > >>>>>>>>>>>> 8.0.0)
> > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > >>>>>>>>>>>> VT: init without driver.
> > >>>>>>>>>>>> Starting CPU 1 (1)
> > >>>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > >>>>>>>>>>>> [...]
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Best regards,
> > >>>>>>>>>>>> Marcin
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>> napisa?(a):
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Soren-
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks for the quick response. I built this kernel with revision 350924.
> > >>>>>>>>>>>> I'll dig into whats going on in the morning.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mind posting your diff for your loader.efi?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks again!
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> ----- Original Message -----
> > >>>>>>>>>>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com> <mailto:soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>>
> > >>>>>>>>>>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>>
> > >>>>>>>>>>>> Cc: "tscho" <johannes at t-beutel.com <mailto:johannes at t-beutel.com> <mailto:johannes at t-beutel.com <mailto:johannes at t-beutel.com>>>, "freebsd-arm" <
> > >>>>>>>>>>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>>
> > >>>>>>>>>>>> Sent: Monday, August 12, 2019 3:49:48 PM
> > >>>>>>>>>>>> Subject: Re: Espressobin anyone ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Hi
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Looks like your sources may be too old, you need to be at least at r348882
> > >>>>>>>>>>>> to get the fix for the SD card VCC regulator.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> That change fixed it for me backported to 12-stable...
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> The currdev problem still exists, I have it hardwired in my loader for
> > >>>>>>>>>>>> aarch64 :)
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> -Søren
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit at pt.net <mailto:mit at pt.net> <mailto:mit at pt.net <mailto:mit at pt.net>>> wrote:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> I'm having a couple little hiccups booting this board also. One has
> > >>>>>>>>>>>> been commented on already, that I can't get the loader to automatically
> > >>>>>>>>>>>> start loading the kernel on "disk0p2"...
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> The second, is that the kernel can't find the SD card after booting so
> > >>>>>>>>>>>> it can't mount the root filesystem. I'm using the dts/dtb and kernel from
> > >>>>>>>>>>>> the 13-current branch.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Thanks for any and all help. I haven't used u-boot in about decade.
> > >>>>>>>>>>>> Spoiled by the x86 platform.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Mit Matelske
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> ***U-boot environment:***
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Marvell>> printenv
> > >>>>>>>>>>>> baudrate=115200
> > >>>>>>>>>>>> bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
> > >>>>>>>>>>>> root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 biosdevname=0
> > >>>>>>>>>>>> bootcmd=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
> > >>>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> > >>>>>>>>>>>> bootdelay=2
> > >>>>>>>>>>>> bootmmc=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
> > >>>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> > >>>>>>>>>>>> console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
> > >>>>>>>>>>>> eth1addr=00:51:82:11:22:01
> > >>>>>>>>>>>> eth2addr=00:51:82:11:22:02
> > >>>>>>>>>>>> eth3addr=00:51:82:11:22:03
> > >>>>>>>>>>>> ethact=neta at 30000
> > >>>>>>>>>>>> ethaddr=F0:AD:4E:09:6B:8F
> > >>>>>>>>>>>> ethprime=eth0
> > >>>>>>>>>>>> fdt_addr=0x4f00000
> > >>>>>>>>>>>> fdt_high=0xffffffffffffffff
> > >>>>>>>>>>>> fdt_name=efi/boot/armada-3720-espressobin.dtb
> > >>>>>>>>>>>> fdtcontroladdr=3f7161b8
> > >>>>>>>>>>>> gatewayip=10.4.50.254
> > >>>>>>>>>>>> get_images=tftpboot $kernel_addr $image_name; tftpboot $fdt_addr
> > >>>>>>>>>>>> $fdt_name; run get_ramfs
> > >>>>>>>>>>>> get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr
> > >>>>>>>>>>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi
> > >>>>>>>>>>>> hostname=marvell
> > >>>>>>>>>>>> image_name=efi/freebsd/loader.efi
> > >>>>>>>>>>>> initrd_addr=0xa00000
> > >>>>>>>>>>>> initrd_size=0x2000000
> > >>>>>>>>>>>> ipaddr=0.0.0.0
> > >>>>>>>>>>>> kernel_addr=0x5000000
> > >>>>>>>>>>>> loadaddr=0x5000000
> > >>>>>>>>>>>> netdev=eth0
> > >>>>>>>>>>>> netmask=255.255.255.0
> > >>>>>>>>>>>> ramfs_addr=0x8000000
> > >>>>>>>>>>>> ramfs_name=-
> > >>>>>>>>>>>> root=root=/dev/nfs rw
> > >>>>>>>>>>>> rootpath=/srv/nfs/
> > >>>>>>>>>>>> serverip=0.0.0.0
> > >>>>>>>>>>>> set_bootargs=setenv bootargs $console $root
> > >>>>>>>>>>>> ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
> > >>>>>>>>>>>> nfsroot=$serverip:$rootpath $extra_params
> > >>>>>>>>>>>> stderr=serial at 12000
> > >>>>>>>>>>>> stdin=serial at 12000
> > >>>>>>>>>>>> stdout=serial at 12000
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> ***Full boot logs:***
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> > >>>>>>>>>>>> CPU @ 1000 [MHz]
> > >>>>>>>>>>>> L2 @ 800 [MHz]
> > >>>>>>>>>>>> TClock @ 200 [MHz]
> > >>>>>>>>>>>> DDR @ 800 [MHz]
> > >>>>>>>>>>>> DRAM: 1 GiB
> > >>>>>>>>>>>> U-Boot DT blob at : 000000003f7161b8
> > >>>>>>>>>>>> Comphy-0: USB3 5 Gbps
> > >>>>>>>>>>>> Comphy-1: PEX0 2.5 Gbps
> > >>>>>>>>>>>> Comphy-2: SATA0 6 Gbps
> > >>>>>>>>>>>> SATA link 0 timeout.
> > >>>>>>>>>>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> > >>>>>>>>>>>> flags: ncq led only pmp fbss pio slum part sxs
> > >>>>>>>>>>>> PCIE-0: Link down
> > >>>>>>>>>>>> MMC: sdhci at d0000: 0, sdhci at d8000: 1
> > >>>>>>>>>>>> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
> > >>>>>>>>>>>> total 4 MiB
> > >>>>>>>>>>>> Net: eth0: neta at 30000 [PRIME]
> > >>>>>>>>>>>> Hit any key to stop autoboot: 0
> > >>>>>>>>>>>> switch to partitions #0, OK
> > >>>>>>>>>>>> mmc0 is current device
> > >>>>>>>>>>>> reading efi/freebsd/loader.efi
> > >>>>>>>>>>>> 603872 bytes read in 49 ms (11.8 MiB/s)
> > >>>>>>>>>>>> reading efi/boot/armada-3720-espressobin.dtb
> > >>>>>>>>>>>> 15946 bytes read in 17 ms (916 KiB/s)
> > >>>>>>>>>>>> ## Starting EFI application at 05000000 ...
> > >>>>>>>>>>>> Scanning disk sdhci at d0000.blk <mailto:sdhci at d0000.blk <mailto:sdhci at d0000.blk>>...
> > >>>>>>>>>>>> Card did not respond to voltage select!
> > >>>>>>>>>>>> mmc_init: -95, time 50
> > >>>>>>>>>>>> Found 1 disks
> > >>>>>>>>>>>> Consoles: EFI console
> > >>>>>>>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Command line arguments: loader.efi
> > >>>>>>>>>>>> EFI version: 2.05
> > >>>>>>>>>>>> EFI Firmware: Das U-boot (rev 0.00)
> > >>>>>>>>>>>> Console: efi (0)
> > >>>>>>>>>>>> Failed to find bootable partition
> > >>>>>>>>>>>> Startup error in /boot/lua/loader.lua: seconds
> > >>>>>>>>>>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> can't load 'kernel'
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Type '?' for a list of commands, 'help' for more detailed help.
> > >>>>>>>>>>>> OK
> > >>>>>>>>>>>> OK set currdev=disk0p2
> > >>>>>>>>>>>> OK boot
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> /boot/kernel/kernel text=0x97d6a0 data=0x191b50+0x84ae94
> > >>>>>>>>>>>> syms=[0x8+0x137dd8+0x8+0x126260]
> > >>>>>>>>>>>> Using DTB provided by EFI at 0x8000000.
> > >>>>>>>>>>>> ---<<BOOT>>---
> > >>>>>>>>>>>> KDB: debugger backends: ddb
> > >>>>>>>>>>>> KDB: current backend: ddb
> > >>>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> > >>>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > >>>>>>>>>>>> The Regents of the University of California. All rights reserved.
> > >>>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > >>>>>>>>>>>> FreeBSD 13.0-CURRENT GENERIC arm64
> > >>>>>>>>>>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
> > >>>>>>>>>>>> LLVM 6.0.1)
> > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > >>>>>>>>>>>> VT: init without driver.
> > >>>>>>>>>>>> Starting CPU 1 (1)
> > >>>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > >>>>>>>>>>>> arc4random: WARNING: initial seeding bypassed the cryptographic random
> > >>>>>>>>>>>> device because it was not yet seeded and the knob 'bypass_before_seeding'
> > >>>>>>>>>>>> was enabled.
> > >>>>>>>>>>>> random: entropy device external interface
> > >>>>>>>>>>>> MAP 3e681000 mode 2 pages 1
> > >>>>>>>>>>>> MAP 3ffa6000 mode 2 pages 1
> > >>>>>>>>>>>> kbd0 at kbdmux0
> > >>>>>>>>>>>> ofwbus0: <Open Firmware Device Tree>
> > >>>>>>>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> > >>>>>>>>>>>> simplebus1: <Flattened device tree simple bus> on simplebus0
> > >>>>>>>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> > >>>>>>>>>>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> > >>>>>>>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> > >>>>>>>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem
> > >>>>>>>>>>>> 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff
> > >>>>>>>>>>>> irq 27 on simplebus1
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> > >>>>>>>>>>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
> > >>>>>>>>>>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> > >>>>>>>>>>>> cpu0: <Open Firmware CPU> on cpulist0
> > >>>>>>>>>>>> cpu1: <Open Firmware CPU> on cpulist0
> > >>>>>>>>>>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> > >>>>>>>>>>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> > >>>>>>>>>>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> > >>>>>>>>>>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
> > >>>>>>>>>>>> simplebus1
> > >>>>>>>>>>>> uart0: console (115200,n,8,1)
> > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> > >>>>>>>>>>>> simple_mfd0
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> > >>>>>>>>>>>> gpio0: cannot allocate memory window
> > >>>>>>>>>>>> device_attach: gpio0 attach returned 6
> > >>>>>>>>>>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
> > >>>>>>>>>>>> mvneta0: version is 10
> > >>>>>>>>>>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> > >>>>>>>>>>>> mdio0: <MDIO> on mvneta0
> > >>>>>>>>>>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> > >>>>>>>>>>>> e6000sw0: <Marvell 88E6341> on mdio0
> > >>>>>>>>>>>> e6000sw0: multi-chip addressing mode (0x1)
> > >>>>>>>>>>>> e6000sw0: CPU port at 0
> > >>>>>>>>>>>> e6000sw0: fixed port at 0
> > >>>>>>>>>>>> e6000sw0: PHY at port 1
> > >>>>>>>>>>>> miibus0: <MII bus> on e6000sw0
> > >>>>>>>>>>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> > >>>>>>>>>>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> > >>>>>>>>>>>> e6000sw0: PHY at port 2
> > >>>>>>>>>>>> miibus1: <MII bus> on e6000sw0
> > >>>>>>>>>>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> > >>>>>>>>>>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> > >>>>>>>>>>>> e6000sw0: PHY at port 3
> > >>>>>>>>>>>> miibus2: <MII bus> on e6000sw0
> > >>>>>>>>>>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> > >>>>>>>>>>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> > >>>>>>>>>>>> e6000sw0: switch is ready.
> > >>>>>>>>>>>> etherswitch0: <Switch controller> on e6000sw0
> > >>>>>>>>>>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
> > >>>>>>>>>>>> simplebus1
> > >>>>>>>>>>>> xhci0: 32 bytes context size, 32-bit DMA
> > >>>>>>>>>>>> usbus0 on xhci0
> > >>>>>>>>>>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> > >>>>>>>>>>>> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq
> > >>>>>>>>>>>> 17 on simplebus1
> > >>>>>>>>>>>> usbus1: EHCI version 1.0
> > >>>>>>>>>>>> usbus1 on ehci0
> > >>>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
> > >>>>>>>>>>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> > >>>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> > >>>>>>>>>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
> > >>>>>>>>>>>> ahcich0: <AHCI channel> at channel 0 on ahci0
> > >>>>>>>>>>>> device_attach: ahcich0 attach returned 6
> > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> > >>>>>>>>>>>> gpioregulator0: cannot get pin 0
> > >>>>>>>>>>>> gpioregulator0: cannot parse parameters
> > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6
> > >>>>>>>>>>>> cryptosoft0: <software crypto>
> > >>>>>>>>>>>> Timecounters tick every 1.000 msec
> > >>>>>>>>>>>> mvneta0: link state changed to UP
> > >>>>>>>>>>>> e6000sw0port1: link state changed to DOWN
> > >>>>>>>>>>>> e6000sw0port2: link state changed to DOWN
> > >>>>>>>>>>>> e6000sw0port3: link state changed to DOWN
> > >>>>>>>>>>>> usbus0: 5.0Gbps Super Speed USB v3.0
> > >>>>>>>>>>>> usbus1: 480Mbps High Speed USB v2.0
> > >>>>>>>>>>>> Release APs...done
> > >>>>>>>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> > >>>>>>>>>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> > >>>>>>>>>>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
> > >>>>>>>>>>>> Instruction Set Attributes 1 = <>
> > >>>>>>>>>>>> Root mount waiting for: Processor Features 0 =
> > >>>>>>>>>>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> > >>>>>>>>>>>> usbus1 Processor Features 1 = <0>
> > >>>>>>>>>>>> usbus0 Memory Model Features 0 = <4k Granule,64k Granule,S/NS
> > >>>>>>>>>>>> Mem,MixedEndian,16bit ASID,1TB PA>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Memory Model Features 1 = <>
> > >>>>>>>>>>>> Memory Model Features 2 = <32b CCIDX,48b VA>
> > >>>>>>>>>>>> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
> > >>>>>>>>>>>> Breakpoints,PMUv3,Debug v8>
> > >>>>>>>>>>>> Debug Features 1 = <0>
> > >>>>>>>>>>>> Auxiliary Features 0 = <0>
> > >>>>>>>>>>>> Auxiliary Features 1 = <0>
> > >>>>>>>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
> > >>>>>>>>>>>> ugen0.1: <Generic XHCI root HUB> at usbus0
> > >>>>>>>>>>>> ugen1.1: <Marvell EHCI root HUB> at usbus1
> > >>>>>>>>>>>> uhub0 on usbus0
> > >>>>>>>>>>>> uhub1 on usbus1
> > >>>>>>>>>>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
> > >>>>>>>>>>>> usbus0
> > >>>>>>>>>>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> > >>>>>>>>>>>> usbus1
> > >>>>>>>>>>>> uhub0: 2 ports with 2 removable, self powered
> > >>>>>>>>>>>> uhub1: 1 port with 1 removable, self powered
> > >>>>>>>>>>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> > >>>>>>>>>>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Loader variables:
> > >>>>>>>>>>>> vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
> > >>>>>>>>>>>> vfs.root.mountfrom.options=ro,noatime
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> Manual root filesystem specification:
> > >>>>>>>>>>>> <fstype>:<device> [options]
> > >>>>>>>>>>>> Mount <device> using filesystem <fstype>
> > >>>>>>>>>>>> and with the specified (optional) option list.
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> eg. ufs:/dev/da0s1a
> > >>>>>>>>>>>> zfs:zroot/ROOT/default
> > >>>>>>>>>>>> cd9660:/dev/cd0 ro
> > >>>>>>>>>>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> ? List valid disk boot devices
> > >>>>>>>>>>>> . Yield 1 second (for background tasks)
> > >>>>>>>>>>>> <empty line> Abort manual input
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> mountroot> ?
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> List of GEOM managed disk devices:
> > >>>>>>>>>>>>
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> mountroot>
> > >>>>>>>>>>>> _______________________________________________
> > >>>>>>>>>>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>> mailing list
> > >>>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm> <https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>>
> > >>>>>>>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org> <mailto:freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>>"
> > >>>>>>>>>>>>
> > >>>>>>>>>>>> _______________________________________________
> > >>>>>>>>>>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> <mailto:freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>> mailing list
> > >>>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm> <https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>>
> > >>>>>>>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org> <mailto:freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>>"
> > >>>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>> --
> > >>>>>>>>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> > >>>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> --
> > >>>>>>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> > >>>>>>
> > >>>>>>
> > >>>>>> --
> > >>>>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> > >>>>>> _______________________________________________
> > >>>>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> > >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> > >>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
> > >>>>>
> > >>>>>
> > >>>>> --
> > >>>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> > >>>>> _______________________________________________
> > >>>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> > >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> > >>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
> > >>>>
> > >>>>
> > >>>> --
> > >>>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> > >>>> _______________________________________________
> > >>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> > >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> > >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
> > >>>
> > >>>
> > >>> --
> > >>> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com> <mailto:manu at bidouilliste.com <mailto:manu at bidouilliste.com>>> <manu at freebsd.org <mailto:manu at freebsd.org> <mailto:manu at freebsd.org <mailto:manu at freebsd.org>>>
> > >>
> > >
> > >
> > > --
> > > Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com> <mailto:manu at bidouilliste.com <mailto:manu at bidouilliste.com>>> <manu at freebsd.org <mailto:manu at freebsd.org> <mailto:manu at freebsd.org <mailto:manu at freebsd.org>>>
> >
>
>
> --
> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> _______________________________________________
> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20190818/55daedcf/attachment-0001.sig>
More information about the freebsd-arm
mailing list