Espressobin anyone ?
Emmanuel Vadot
manu at bidouilliste.com
Thu Aug 15 21:37:59 UTC 2019
On Thu, 15 Aug 2019 21:56:23 +0200
Søren Schmidt <soren.schmidt at gmail.com> wrote:
>
> Well, I don?t care where you are from and what color you have :)
>
> Now, if I update my stable12 sources to r350595 the bananapi breaks, if revert sys/gnu/dts it works again, go figure..
Reverting to what ? and how ?
Because I've just test 12-stable and I have the problem that I've said
in my previous mail so setting hw.regulator.disable_unused=0 is the
work around.
The problem is in twsi not in the DTS so I'm curious how reverting
only the dts fixes this problem.
> The r351099 fix is already like that in -stable, and not part of the problem.
>
> -Søren
> > On 15 Aug 2019, at 21.03, Emmanuel Vadot <manu at bidouilliste.com> wrote:
> >
> > On Thu, 15 Aug 2019 19:48:54 +0200
> > Søren Schmidt <soren.schmidt at gmail.com> wrote:
> >
> >> Hi Mit!
> >>
> >> Right, I suspected that, 12-stable broke many embedded systems between r350592 and r350595 where all the latest and greatest DTS files was pulled in, I guess the same holds for -current.
> >>
> >> -Søren
> >
> > Mhm it's fun that you think that DTS import is the source of all your
> > problems, I get it, it's easy to blame the French guy that bulk import
> > the DTS, he surely don't know what he is doing.
> > Anyway, two problems were raised in this thread :
> >
> > 1) BananaPi (A20) doesn't boot
> > 2) Espressobin sd support is broken
> >
> > I've just looked at the BananaPi problem today, I've fixed a first
> > problem in r351099.
> > The main problem is that when we disable the unused regulators we hang
> > when trying to disabling ldo3. It's weird because the board doesn't use
> > LDO3 (which is why we are disabling it, it's unused). The problem is in
> > twsi I think as only leaving the part in axp209 that read the
> > voltage register value make FreeBSD hang.
> > I'll have a proper look later, in the meantime you can set
> > hw.regulator.disable_unused=0
> > in /boot/loader.conf
> > This isn't a DTS problem.
> >
> > For Espressobin I haven't found any thing related to SD in the DTS
> > updates since the import, the only things slighly related are mmc and
> > sdio.
> > So if someone could find which DTS import broke this I can have a look.
> >
> >>
> >>> On 15 Aug 2019, at 19.37, Mit Matelske <mit at pt.net> wrote:
> >>>
> >>> Yeah, that was the problem. I went back to r348882 and everything worked out of the box.
> >>>
> >>> Thanks again for the hand holding!
> >>>
> >>> Mit
> >>>
> >>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
> >>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
> >>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
> >>> Sent: Wednesday, August 14, 2019 1:33:04 PM
> >>> Subject: Re: Espressobin anyone ?
> >>>
> >>>
> >>> It might simply be broken in -current (again).
> >>>
> >>> I just updated my stable12 tree and I pulled in new .dts files for just about anything?
> >>>
> >>> Needless to say, it broke the Espressobin?s SD support, it now fails just like yours..
> >>>
> >>> It also broke allwinner builds and what not, so I?m just going back in time again :)
> >>>
> >>> I wonder why there is this overwhelming need to import stuff that breaks things right, left and center in a -stable branch ?
> >>> That would have earned you the pointy hat back when?.
> >>>
> >>> -Søren
> >>>
> >>>
> >>> On 14 Aug 2019, at 18.01, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
> >>>
> >>> Marcin-
> >>>
> >>> Sorry I didn't reply yesterday. I didn't have any luck with that either. I tried a lot of permutations.
> >>>
> >>> Not saying for 100% it doesn't work, but I couldn't get it to work!
> >>>
> >>> Mit
> >>>
> >>> From: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>
> >>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
> >>> Cc: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
> >>> Sent: Wednesday, August 14, 2019 10:41:04 AM
> >>> Subject: Re: Espressobin anyone ?
> >>>
> >>> Hi Mit,
> >>> Since you are using the latest 13-current, could you please try if passing rootdev via u-boot bootargs (please see my previous email) works for you without the loader modification?
> >>>
> >>> Best regards,
> >>> Marcin
> >>>
> >>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit at pt.net <mailto:mit at pt.net>> napisa?(a):
> >>> Soren-
> >>>
> >>> Thanks for the info. I'll grab a couple more SD cards at lunch. This one is a new Samsung 32GB. I'll also try putting the changes into 12 and see if that helps. I'm using the latest 13-current.
> >>>
> >>> Again, appreciate the hand holding!
> >>>
> >>> Mit
> >>>
> >>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
> >>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
> >>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
> >>> Sent: Wednesday, August 14, 2019 2:30:31 AM
> >>> Subject: Re: Espressobin anyone ?
> >>>
> >>> Hi Mit
> >>> Hmm, from your earlier posted dmesgs it looks like the SD card is not getting detected properly..
> >>>
> >>> I get this output:
> >>>
> >>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> >>> mmc0: <MMC/SD bus> on sdhci_xenon0
> >>> ?snip?
> >>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH> at mmc0 50.0MHz/4bit/65535-block
> >>>
> >>> The problem you see was fixed for me by r348882, maybe it got broken later, I havn?t backported the later changes..
> >>>
> >>> Have you tried another SD card ? I have found 2 of mine that the espressobin doesn?t like, but works fine with bananapi and friends...
> >>>
> >>> -Søren
> >>>
> >>> On 13 Aug 2019, at 23.30, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
> >>>
> >>> Soren-
> >>>
> >>> Thanks for the code snippet! That will fix one of the problems.
> >>>
> >>> I still can't mount my filesystem, though. I think I'm doing something really simple, wrong. I believe I'm running the latest code and added some printfs to show the kernel setting the regulator:
> >>>
> >>>
> >>> usbus1 on ehci0
> >>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> >>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) = 19
> >>> sdhci_xenon0: vqmmc-supply regulator found
> >>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> >>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> >>>
> >>>
> >>> Could there be a problem with how I am setting up my filesystem? I've tried both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of my SD card:
> >>>
> >>> root at fbl:~ # gpart list da3
> >>> Geom name: da3
> >>> modified: false
> >>> state: OK
> >>> fwheads: 255
> >>> fwsectors: 63
> >>> last: 62521335
> >>> first: 3
> >>> entries: 4
> >>> scheme: GPT
> >>> Providers:
> >>> 1. Name: da3p1
> >>> Mediasize: 41943040 (40M)
> >>> Sectorsize: 512
> >>> Stripesize: 0
> >>> Stripeoffset: 1536
> >>> Mode: r0w0e0
> >>> efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
> >>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
> >>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> >>> label: (null)
> >>> length: 41943040
> >>> offset: 1536
> >>> type: efi
> >>> index: 1
> >>> end: 81922
> >>> start: 3
> >>> 2. Name: da3p2
> >>> Mediasize: 31968979456 (30G)
> >>> Sectorsize: 512
> >>> Stripesize: 0
> >>> Stripeoffset: 41944576
> >>> Mode: r0w0e0
> >>> efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
> >>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
> >>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
> >>> label: (null)
> >>> length: 31968979456
> >>> offset: 41944576
> >>> type: freebsd-ufs
> >>> index: 2
> >>> end: 62521335
> >>> start: 81923
> >>> Consumers:
> >>> 1. Name: da3
> >>> Mediasize: 32010928128 (30G)
> >>> Sectorsize: 512
> >>> Mode: r0w0e0
> >>>
> >>> Thanks!!
> >>>
> >>> Mit
> >>>
> >>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
> >>> To: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>
> >>> Cc: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
> >>> Sent: Tuesday, August 13, 2019 12:55:09 PM
> >>> Subject: Re: Espressobin anyone ?
> >>>
> >>> Hi
> >>> That doesn?t seen to work on the espressobin, or least I can?t get it to pick it up.
> >>>
> >>> I use this patch as a workaround:
> >>>
> >>> Index: main.c
> >>> ===================================================================
> >>> --- main.c (revision 350496)
> >>> +++ main.c (working copy)
> >>> @@ -463,6 +462,13 @@
> >>> int rv;
> >>> char *rootdev;
> >>>
> >>> +#if defined(__aarch64__)
> >>> + /* SOS HACK in rootdev, at least Espressobin gets this wrong */
> >>> + printf("Setting currdev hack\n");
> >>> + set_currdev("disk0p2");
> >>> + return (0);
> >>> +#endif
> >>> +
> >>> /*
> >>> * First choice: if rootdev is already set, use that, even if
> >>> * it's wrong.
> >>>
> >>> Its not pretty but it does the job until I get time to look into why bootargs aren?t passed / won?t stick, probably something I havn?t backported to my -stable12 sources yet...
> >>>
> >>> -Søren
> >>>
> >>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw at semihalf.com <mailto:mw at semihalf.com>> wrote:
> >>>
> >>> Hi,
> >>>
> >>> Not sure if it's what you are looking for, but in order to autoboot, I
> >>> simply pass 'rootdev=diskXpY' in the bootargs variable. Here's example from
> >>> A3720-DB (same should work on EspressoBin):
> >>>
> >>> Marvell>> set bootargs "rootdev=disk1p1";usb reset; fatload usb 0:1
> >>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
> >>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
> >>> resetting USB...
> >>> USB0: Register 2000104 NbrPorts 2
> >>> Starting the controller
> >>> USB XHCI 1.00
> >>> USB1: USB EHCI 1.00
> >>> - ______ ____ _____ _____
> >>> | ____| | _ \ / ____| __ \
> >>> | |___ _ __ ___ ___ | |_) | (___ | | | |
> >>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> >>> | | | | | __/ __/| |_) |____) | |__| |
> >>> | | | | | | || | | |
> >>> |_| |_| \___|\___||____/|_____/|_____/
> >>> ```
> >>> `
> >>> ????????????Welcome to FreeBSD????????????? s` `.....---.......--.```
> >>> -/
> >>> ? ? +o .--` /y:`
> >>> +.
> >>> ? 1. Boot Multi user [Enter] ? yo`:. :o
> >>> `+-
> >>> ? 2. Boot Single user ? y/ -/` -o/
> >>> ? 3. Escape to loader prompt ? .-
> >>> ::/sy+:.
> >>> ? 4. Reboot ? / `--
> >>> /
> >>> ? ? `:
> >>> :`
> >>> ? Options: ? `:
> >>> :`
> >>> ? 5. Kernel: default/kernel (1 of 1) ? /
> >>> /
> >>> ? 6. Boot Options ? .-
> >>> -.
> >>> ? ? -- -.
> >>> ? ? `:` `:`
> >>> ? ? .-- `--.
> >>> ??????????????????????????????????????????? .---.....----.
> >>> Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
> >>>
> >>> Loading kernel...
> >>> /boot/kernel/kernel text=0x95047c data=0x1919d0+0x84aa94
> >>> syms=[0x8+0x13aaa8+0x8+0x12610d]
> >>> Loading configured modules...
> >>> can't find '/boot/entropy'
> >>> Using DTB provided by EFI at 0x8000000.
> >>> ---<<BOOT>>---
> >>> KDB: debugger backends: ddb
> >>> KDB: current backend: ddb
> >>> Copyright (c) 1992-2019 The FreeBSD Project.
> >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >>> The Regents of the University of California. All rights reserved.
> >>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64
> >>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM
> >>> 8.0.0)
> >>> WARNING: WITNESS option enabled, expect reduced performance.
> >>> VT: init without driver.
> >>> Starting CPU 1 (1)
> >>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >>> [...]
> >>>
> >>> Best regards,
> >>> Marcin
> >>>
> >>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit at pt.net <mailto:mit at pt.net>> napisa?(a):
> >>>
> >>>
> >>> Soren-
> >>>
> >>> Thanks for the quick response. I built this kernel with revision 350924.
> >>> I'll dig into whats going on in the morning.
> >>>
> >>> Mind posting your diff for your loader.efi?
> >>>
> >>> Thanks again!
> >>>
> >>> Mit
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
> >>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
> >>> Cc: "tscho" <johannes at t-beutel.com <mailto:johannes at t-beutel.com>>, "freebsd-arm" <
> >>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
> >>> Sent: Monday, August 12, 2019 3:49:48 PM
> >>> Subject: Re: Espressobin anyone ?
> >>>
> >>> Hi
> >>>
> >>> Looks like your sources may be too old, you need to be at least at r348882
> >>> to get the fix for the SD card VCC regulator.
> >>>
> >>> That change fixed it for me backported to 12-stable...
> >>>
> >>> The currdev problem still exists, I have it hardwired in my loader for
> >>> aarch64 :)
> >>>
> >>> -Søren
> >>>
> >>>
> >>> On 12 Aug 2019, at 21.06, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
> >>>
> >>> I'm having a couple little hiccups booting this board also. One has
> >>> been commented on already, that I can't get the loader to automatically
> >>> start loading the kernel on "disk0p2"...
> >>>
> >>> The second, is that the kernel can't find the SD card after booting so
> >>> it can't mount the root filesystem. I'm using the dts/dtb and kernel from
> >>> the 13-current branch.
> >>>
> >>> Thanks for any and all help. I haven't used u-boot in about decade.
> >>> Spoiled by the x86 platform.
> >>>
> >>> Mit Matelske
> >>>
> >>>
> >>> ***U-boot environment:***
> >>>
> >>>
> >>> Marvell>> printenv
> >>> baudrate=115200
> >>> bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
> >>> root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 biosdevname=0
> >>> bootcmd=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
> >>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> >>> bootdelay=2
> >>> bootmmc=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
> >>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> >>> console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
> >>> eth1addr=00:51:82:11:22:01
> >>> eth2addr=00:51:82:11:22:02
> >>> eth3addr=00:51:82:11:22:03
> >>> ethact=neta at 30000
> >>> ethaddr=F0:AD:4E:09:6B:8F
> >>> ethprime=eth0
> >>> fdt_addr=0x4f00000
> >>> fdt_high=0xffffffffffffffff
> >>> fdt_name=efi/boot/armada-3720-espressobin.dtb
> >>> fdtcontroladdr=3f7161b8
> >>> gatewayip=10.4.50.254
> >>> get_images=tftpboot $kernel_addr $image_name; tftpboot $fdt_addr
> >>> $fdt_name; run get_ramfs
> >>> get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr
> >>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi
> >>> hostname=marvell
> >>> image_name=efi/freebsd/loader.efi
> >>> initrd_addr=0xa00000
> >>> initrd_size=0x2000000
> >>> ipaddr=0.0.0.0
> >>> kernel_addr=0x5000000
> >>> loadaddr=0x5000000
> >>> netdev=eth0
> >>> netmask=255.255.255.0
> >>> ramfs_addr=0x8000000
> >>> ramfs_name=-
> >>> root=root=/dev/nfs rw
> >>> rootpath=/srv/nfs/
> >>> serverip=0.0.0.0
> >>> set_bootargs=setenv bootargs $console $root
> >>> ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
> >>> nfsroot=$serverip:$rootpath $extra_params
> >>> stderr=serial at 12000
> >>> stdin=serial at 12000
> >>> stdout=serial at 12000
> >>>
> >>>
> >>> ***Full boot logs:***
> >>>
> >>>
> >>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
> >>>
> >>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> >>> CPU @ 1000 [MHz]
> >>> L2 @ 800 [MHz]
> >>> TClock @ 200 [MHz]
> >>> DDR @ 800 [MHz]
> >>> DRAM: 1 GiB
> >>> U-Boot DT blob at : 000000003f7161b8
> >>> Comphy-0: USB3 5 Gbps
> >>> Comphy-1: PEX0 2.5 Gbps
> >>> Comphy-2: SATA0 6 Gbps
> >>> SATA link 0 timeout.
> >>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> >>> flags: ncq led only pmp fbss pio slum part sxs
> >>> PCIE-0: Link down
> >>> MMC: sdhci at d0000: 0, sdhci at d8000: 1
> >>> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
> >>> total 4 MiB
> >>> Net: eth0: neta at 30000 [PRIME]
> >>> Hit any key to stop autoboot: 0
> >>> switch to partitions #0, OK
> >>> mmc0 is current device
> >>> reading efi/freebsd/loader.efi
> >>> 603872 bytes read in 49 ms (11.8 MiB/s)
> >>> reading efi/boot/armada-3720-espressobin.dtb
> >>> 15946 bytes read in 17 ms (916 KiB/s)
> >>> ## Starting EFI application at 05000000 ...
> >>> Scanning disk sdhci at d0000.blk <mailto:sdhci at d0000.blk>...
> >>> Card did not respond to voltage select!
> >>> mmc_init: -95, time 50
> >>> Found 1 disks
> >>> Consoles: EFI console
> >>> FreeBSD/arm64 EFI loader, Revision 1.1
> >>>
> >>> Command line arguments: loader.efi
> >>> EFI version: 2.05
> >>> EFI Firmware: Das U-boot (rev 0.00)
> >>> Console: efi (0)
> >>> Failed to find bootable partition
> >>> Startup error in /boot/lua/loader.lua: seconds
> >>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
> >>>
> >>> can't load 'kernel'
> >>>
> >>> Type '?' for a list of commands, 'help' for more detailed help.
> >>> OK
> >>> OK set currdev=disk0p2
> >>> OK boot
> >>>
> >>> /boot/kernel/kernel text=0x97d6a0 data=0x191b50+0x84ae94
> >>> syms=[0x8+0x137dd8+0x8+0x126260]
> >>> Using DTB provided by EFI at 0x8000000.
> >>> ---<<BOOT>>---
> >>> KDB: debugger backends: ddb
> >>> KDB: current backend: ddb
> >>> Copyright (c) 1992-2019 The FreeBSD Project.
> >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >>> The Regents of the University of California. All rights reserved.
> >>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>> FreeBSD 13.0-CURRENT GENERIC arm64
> >>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
> >>> LLVM 6.0.1)
> >>> WARNING: WITNESS option enabled, expect reduced performance.
> >>> VT: init without driver.
> >>> Starting CPU 1 (1)
> >>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >>> arc4random: WARNING: initial seeding bypassed the cryptographic random
> >>> device because it was not yet seeded and the knob 'bypass_before_seeding'
> >>> was enabled.
> >>> random: entropy device external interface
> >>> MAP 3e681000 mode 2 pages 1
> >>> MAP 3ffa6000 mode 2 pages 1
> >>> kbd0 at kbdmux0
> >>> ofwbus0: <Open Firmware Device Tree>
> >>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> >>> simplebus1: <Flattened device tree simple bus> on simplebus0
> >>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> >>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> >>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> >>> gic0: <ARM Generic Interrupt Controller v3.0> mem
> >>> 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff
> >>> irq 27 on simplebus1
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> >>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
> >>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> >>> cpu0: <Open Firmware CPU> on cpulist0
> >>> cpu1: <Open Firmware CPU> on cpulist0
> >>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> >>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> >>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> >>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
> >>> simplebus1
> >>> uart0: console (115200,n,8,1)
> >>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
> >>> simple_mfd0
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> >>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>> gpio0: cannot allocate memory window
> >>> device_attach: gpio0 attach returned 6
> >>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
> >>> mvneta0: version is 10
> >>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> >>> mdio0: <MDIO> on mvneta0
> >>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> >>> e6000sw0: <Marvell 88E6341> on mdio0
> >>> e6000sw0: multi-chip addressing mode (0x1)
> >>> e6000sw0: CPU port at 0
> >>> e6000sw0: fixed port at 0
> >>> e6000sw0: PHY at port 1
> >>> miibus0: <MII bus> on e6000sw0
> >>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> >>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> >>> e6000sw0: PHY at port 2
> >>> miibus1: <MII bus> on e6000sw0
> >>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> >>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> >>> e6000sw0: PHY at port 3
> >>> miibus2: <MII bus> on e6000sw0
> >>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> >>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> >>> e6000sw0: switch is ready.
> >>> etherswitch0: <Switch controller> on e6000sw0
> >>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
> >>> simplebus1
> >>> xhci0: 32 bytes context size, 32-bit DMA
> >>> usbus0 on xhci0
> >>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> >>> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq
> >>> 17 on simplebus1
> >>> usbus1: EHCI version 1.0
> >>> usbus1 on ehci0
> >>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> >>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
> >>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> >>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> >>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
> >>> ahcich0: <AHCI channel> at channel 0 on ahci0
> >>> device_attach: ahcich0 attach returned 6
> >>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>> gpioregulator0: cannot get pin 0
> >>> gpioregulator0: cannot parse parameters
> >>> device_attach: gpioregulator0 attach returned 6
> >>> cryptosoft0: <software crypto>
> >>> Timecounters tick every 1.000 msec
> >>> mvneta0: link state changed to UP
> >>> e6000sw0port1: link state changed to DOWN
> >>> e6000sw0port2: link state changed to DOWN
> >>> e6000sw0port3: link state changed to DOWN
> >>> usbus0: 5.0Gbps Super Speed USB v3.0
> >>> usbus1: 480Mbps High Speed USB v2.0
> >>> Release APs...done
> >>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> >>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> >>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
> >>> Instruction Set Attributes 1 = <>
> >>> Root mount waiting for: Processor Features 0 =
> >>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> >>> usbus1 Processor Features 1 = <0>
> >>> usbus0 Memory Model Features 0 = <4k Granule,64k Granule,S/NS
> >>> Mem,MixedEndian,16bit ASID,1TB PA>
> >>>
> >>> Memory Model Features 1 = <>
> >>> Memory Model Features 2 = <32b CCIDX,48b VA>
> >>> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
> >>> Breakpoints,PMUv3,Debug v8>
> >>> Debug Features 1 = <0>
> >>> Auxiliary Features 0 = <0>
> >>> Auxiliary Features 1 = <0>
> >>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> >>> WARNING: WITNESS option enabled, expect reduced performance.
> >>> ugen0.1: <Generic XHCI root HUB> at usbus0
> >>> ugen1.1: <Marvell EHCI root HUB> at usbus1
> >>> uhub0 on usbus0
> >>> uhub1 on usbus1
> >>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
> >>> usbus0
> >>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> >>> usbus1
> >>> uhub0: 2 ports with 2 removable, self powered
> >>> uhub1: 1 port with 1 removable, self powered
> >>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> >>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
> >>>
> >>> Loader variables:
> >>> vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
> >>> vfs.root.mountfrom.options=ro,noatime
> >>>
> >>> Manual root filesystem specification:
> >>> <fstype>:<device> [options]
> >>> Mount <device> using filesystem <fstype>
> >>> and with the specified (optional) option list.
> >>>
> >>> eg. ufs:/dev/da0s1a
> >>> zfs:zroot/ROOT/default
> >>> cd9660:/dev/cd0 ro
> >>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
> >>>
> >>> ? List valid disk boot devices
> >>> . Yield 1 second (for background tasks)
> >>> <empty line> Abort manual input
> >>>
> >>> mountroot> ?
> >>>
> >>> List of GEOM managed disk devices:
> >>>
> >>>
> >>> mountroot>
> >>> _______________________________________________
> >>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> >>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> >>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
> >>>
> >>> _______________________________________________
> >>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> >>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> >>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
> >>
> >
> >
> > --
> > Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
>
--
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
More information about the freebsd-arm
mailing list