Espressobin anyone ?
Mit Matelske
mit at pt.net
Tue Aug 13 21:30:45 UTC 2019
Soren-
Thanks for the code snippet! That will fix one of the problems.
I still can't mount my filesystem, though. I think I'm doing something really simple, wrong. I believe I'm running the latest code and added some printfs to show the kernel setting the regulator:
usbus1 on ehci0
syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) = 19
sdhci_xenon0: vqmmc-supply regulator found
sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
Could there be a problem with how I am setting up my filesystem? I've tried both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of my SD card:
root at fbl:~ # gpart list da3
Geom name: da3
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 62521335
first: 3
entries: 4
scheme: GPT
Providers:
1. Name: da3p1
Mediasize: 41943040 (40M)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 1536
Mode: r0w0e0
efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
label: (null)
length: 41943040
offset: 1536
type: efi
index: 1
end: 81922
start: 3
2. Name: da3p2
Mediasize: 31968979456 (30G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 41944576
Mode: r0w0e0
efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
label: (null)
length: 31968979456
offset: 41944576
type: freebsd-ufs
index: 2
end: 62521335
start: 81923
Consumers:
1. Name: da3
Mediasize: 32010928128 (30G)
Sectorsize: 512
Mode: r0w0e0
Thanks!!
Mit
From: "Søren Schmidt" <soren.schmidt at gmail.com>
To: "Marcin Wojtas" <mw at semihalf.com>
Cc: "Mit Matelske" <mit at pt.net>, "freebsd-arm" <freebsd-arm at freebsd.org>
Sent: Tuesday, August 13, 2019 12:55:09 PM
Subject: Re: Espressobin anyone ?
Hi
That doesn’t seen to work on the espressobin, or least I can’t get it to pick it up.
I use this patch as a workaround:
Index: main.c
===================================================================
--- main.c (revision 350496)
+++ main.c (working copy)
@@ -463,6 +462,13 @@
int rv;
char *rootdev;
+#if defined(__aarch64__)
+ /* SOS HACK in rootdev, at least Espressobin gets this wrong */
+ printf("Setting currdev hack\n");
+ set_currdev("disk0p2");
+ return (0);
+#endif
+
/*
* First choice: if rootdev is already set, use that, even if
* it's wrong.
Its not pretty but it does the job until I get time to look into why bootargs aren’t passed / won’t stick, probably something I havn’t backported to my -stable12 sources yet...
-Søren
On 13 Aug 2019, at 01.38, Marcin Wojtas < [ mailto:mw at semihalf.com | mw at semihalf.com ] > wrote:
Hi,
Not sure if it's what you are looking for, but in order to autoboot, I
simply pass 'rootdev=diskXpY' in the bootargs variable. Here's example from
A3720-DB (same should work on EspressoBin):
Marvell>> set bootargs "rootdev=disk1p1";usb reset; fatload usb 0:1
${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
resetting USB...
USB0: Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1: USB EHCI 1.00
- ______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/
```
`
╔═══════════Welcome to FreeBSD════════════╗ s` `.....---.......--.```
-/
║ ║ +o .--` /y:`
+.
║ 1. Boot Multi user [Enter] ║ yo`:. :o
`+-
║ 2. Boot Single user ║ y/ -/` -o/
║ 3. Escape to loader prompt ║ .-
::/sy+:.
║ 4. Reboot ║ / `--
/
║ ║ `:
:`
║ Options: ║ `:
:`
║ 5. Kernel: default/kernel (1 of 1) ║ /
/
║ 6. Boot Options ║ .-
-.
║ ║ -- -.
║ ║ `:` `:`
║ ║ .-- `--.
╚═════════════════════════════════════════╝ .---.....----.
Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
Loading kernel...
/boot/kernel/kernel text=0x95047c data=0x1919d0+0x84aa94
syms=[0x8+0x13aaa8+0x8+0x12610d]
Loading configured modules...
can't find '/boot/entropy'
Using DTB provided by EFI at 0x8000000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM
8.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Starting CPU 1 (1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
[...]
Best regards,
Marcin
pon., 12 sie 2019 o 23:14 Mit Matelske < [ mailto:mit at pt.net | mit at pt.net ] > napisał(a):
BQ_BEGIN
Soren-
Thanks for the quick response. I built this kernel with revision 350924.
I'll dig into whats going on in the morning.
Mind posting your diff for your loader.efi?
Thanks again!
Mit
----- Original Message -----
From: "Søren Schmidt" < [ mailto:soren.schmidt at gmail.com | soren.schmidt at gmail.com ] >
To: "Mit Matelske" < [ mailto:mit at pt.net | mit at pt.net ] >
Cc: "tscho" < [ mailto:johannes at t-beutel.com | johannes at t-beutel.com ] >, "freebsd-arm" <
[ mailto:freebsd-arm at freebsd.org | freebsd-arm at freebsd.org ] >
Sent: Monday, August 12, 2019 3:49:48 PM
Subject: Re: Espressobin anyone ?
Hi
Looks like your sources may be too old, you need to be at least at r348882
to get the fix for the SD card VCC regulator.
That change fixed it for me backported to 12-stable...
The currdev problem still exists, I have it hardwired in my loader for
aarch64 :)
-Søren
BQ_BEGIN
On 12 Aug 2019, at 21.06, Mit Matelske < [ mailto:mit at pt.net | mit at pt.net ] > wrote:
I'm having a couple little hiccups booting this board also. One has
been commented on already, that I can't get the loader to automatically
start loading the kernel on "disk0p2"...
BQ_BEGIN
The second, is that the kernel can't find the SD card after booting so
BQ_END
it can't mount the root filesystem. I'm using the dts/dtb and kernel from
the 13-current branch.
BQ_BEGIN
Thanks for any and all help. I haven't used u-boot in about decade.
BQ_END
Spoiled by the x86 platform.
BQ_BEGIN
Mit Matelske
***U-boot environment:***
Marvell>> printenv
baudrate=115200
bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
BQ_END
root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 biosdevname=0
BQ_BEGIN
bootcmd=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
BQ_END
0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
BQ_BEGIN
bootdelay=2
bootmmc=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
BQ_END
0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
BQ_BEGIN
console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
eth1addr=00:51:82:11:22:01
eth2addr=00:51:82:11:22:02
eth3addr=00:51:82:11:22:03
ethact=neta at 30000
ethaddr=F0:AD:4E:09:6B:8F
ethprime=eth0
fdt_addr=0x4f00000
fdt_high=0xffffffffffffffff
fdt_name=efi/boot/armada-3720-espressobin.dtb
fdtcontroladdr=3f7161b8
gatewayip=10.4.50.254
get_images=tftpboot $kernel_addr $image_name; tftpboot $fdt_addr
BQ_END
$fdt_name; run get_ramfs
BQ_BEGIN
get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr
BQ_END
0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi
BQ_BEGIN
hostname=marvell
image_name=efi/freebsd/loader.efi
initrd_addr=0xa00000
initrd_size=0x2000000
ipaddr=0.0.0.0
kernel_addr=0x5000000
loadaddr=0x5000000
netdev=eth0
netmask=255.255.255.0
ramfs_addr=0x8000000
ramfs_name=-
root=root=/dev/nfs rw
rootpath=/srv/nfs/
serverip=0.0.0.0
set_bootargs=setenv bootargs $console $root
BQ_END
ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
nfsroot=$serverip:$rootpath $extra_params
BQ_BEGIN
stderr=serial at 12000
stdin=serial at 12000
stdout=serial at 12000
***Full boot logs:***
U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
Model: Marvell Armada 3720 Community Board ESPRESSOBin
CPU @ 1000 [MHz]
L2 @ 800 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DRAM: 1 GiB
U-Boot DT blob at : 000000003f7161b8
Comphy-0: USB3 5 Gbps
Comphy-1: PEX0 2.5 Gbps
Comphy-2: SATA0 6 Gbps
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
MMC: sdhci at d0000: 0, sdhci at d8000: 1
SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
BQ_END
total 4 MiB
BQ_BEGIN
Net: eth0: neta at 30000 [PRIME]
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
reading efi/freebsd/loader.efi
603872 bytes read in 49 ms (11.8 MiB/s)
reading efi/boot/armada-3720-espressobin.dtb
15946 bytes read in 17 ms (916 KiB/s)
## Starting EFI application at 05000000 ...
Scanning disk [ mailto:sdhci at d0000.blk | sdhci at d0000.blk ] ...
Card did not respond to voltage select!
mmc_init: -95, time 50
Found 1 disks
Consoles: EFI console
FreeBSD/arm64 EFI loader, Revision 1.1
Command line arguments: loader.efi
EFI version: 2.05
EFI Firmware: Das U-boot (rev 0.00)
Console: efi (0)
Failed to find bootable partition
Startup error in /boot/lua/loader.lua: seconds
LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
can't load 'kernel'
Type '?' for a list of commands, 'help' for more detailed help.
OK
OK set currdev=disk0p2
OK boot
/boot/kernel/kernel text=0x97d6a0 data=0x191b50+0x84ae94
BQ_END
syms=[0x8+0x137dd8+0x8+0x126260]
BQ_BEGIN
Using DTB provided by EFI at 0x8000000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT GENERIC arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
BQ_END
LLVM 6.0.1)
BQ_BEGIN
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Starting CPU 1 (1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random
BQ_END
device because it was not yet seeded and the knob 'bypass_before_seeding'
was enabled.
BQ_BEGIN
random: entropy device external interface
MAP 3e681000 mode 2 pages 1
MAP 3ffa6000 mode 2 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
BQ_BEGIN
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
BQ_BEGIN
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem
BQ_END
0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff
irq 27 on simplebus1
BQ_BEGIN
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
BQ_END
simplebus1
BQ_BEGIN
uart0: console (115200,n,8,1)
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
simple_mfd0
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
BQ_BEGIN
gpio0: cannot allocate memory window
device_attach: gpio0 attach returned 6
mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
mvneta0: version is 10
mvneta0: Ethernet address: 00:a6:39:ca:e8:00
mdio0: <MDIO> on mvneta0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
e6000sw0: <Marvell 88E6341> on mdio0
e6000sw0: multi-chip addressing mode (0x1)
e6000sw0: CPU port at 0
e6000sw0: fixed port at 0
e6000sw0: PHY at port 1
miibus0: <MII bus> on e6000sw0
e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
BQ_BEGIN
e6000sw0: PHY at port 2
miibus1: <MII bus> on e6000sw0
e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
BQ_BEGIN
e6000sw0: PHY at port 3
miibus2: <MII bus> on e6000sw0
e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
BQ_BEGIN
e6000sw0: switch is ready.
etherswitch0: <Switch controller> on e6000sw0
xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
BQ_END
simplebus1
BQ_BEGIN
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq
BQ_END
17 on simplebus1
BQ_BEGIN
usbus1: EHCI version 1.0
usbus1 on ehci0
syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
sdhci_xenon0: <Armada Xenon SDHCI controller> mem
BQ_END
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
BQ_BEGIN
ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
device_attach: ahcich0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
mvneta0: link state changed to UP
e6000sw0port1: link state changed to DOWN
e6000sw0port2: link state changed to DOWN
e6000sw0port3: link state changed to DOWN
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Instruction Set Attributes 1 = <>
Root mount waiting for: Processor Features 0 =
BQ_END
<GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
BQ_BEGIN
usbus1 Processor Features 1 = <0>
usbus0 Memory Model Features 0 = <4k Granule,64k Granule,S/NS
BQ_END
Mem,MixedEndian,16bit ASID,1TB PA>
BQ_BEGIN
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
BQ_END
Breakpoints,PMUv3,Debug v8>
BQ_BEGIN
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.1: <Generic XHCI root HUB> at usbus0
ugen1.1: <Marvell EHCI root HUB> at usbus1
uhub0 on usbus0
uhub1 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
BQ_END
usbus0
BQ_BEGIN
uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
BQ_END
usbus1
BQ_BEGIN
uhub0: 2 ports with 2 removable, self powered
uhub1: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
vfs.root.mountfrom.options=ro,noatime
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
mountroot>
BQ_END
_______________________________________________
[ mailto:freebsd-arm at freebsd.org | freebsd-arm at freebsd.org ] mailing list
[ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.freebsd.org/mailman/listinfo/freebsd-arm ]
To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
BQ_END
_______________________________________________
[ mailto:freebsd-arm at freebsd.org | freebsd-arm at freebsd.org ] mailing list
[ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.freebsd.org/mailman/listinfo/freebsd-arm ]
To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
BQ_END
More information about the freebsd-arm
mailing list