RPi3 doesn't boot r320947
Michael Tuexen
tuexen at freebsd.org
Thu Jul 13 19:42:03 UTC 2017
Dear all,
I installed
https://download.freebsd.org/ftp/snapshots/arm64/aarch64/ISO-IMAGES/12.0/FreeBSD-12.0-CURRENT-arm64-aarch64-RPI3-20170710-r320869.img.xz
on an SD card without any problems, built several packages and finally compiled a GENERIC-NODEBUG
head kernel of today on the RPi3.
After installing it, it doesn't boot.
On the serial console I get:
Using DTB provided by EFI at 0x8004000.
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r320947: Thu Jul 13 18:35:01 CEST 2017
tuexen at generic:/home/tuexen/head/sys/arm64/compile/GENERIC-NODEBUG arm64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 16 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 47,48,49,50 on simplebus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 17 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 18,19 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 20 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 21 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 32 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 38,39 on simplebus0
usbus0 on bcm283x_dwcotg0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 42 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 656x416(656x416 at 0,0) 24bpp
fb0: fbswap: 1, pitch 1968, base 0x3db33000, screen_size 818688
pmu0: <Performance Monitoring Unit> irq 46 on simplebus0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 64GB <SDHC SC64G 8.0 SN ECB540FD MFG 11/2016 by 3 SD> at mmc0 41.6MHz/4bit/65535-block
Release APs
APs not started
x0: ffff000000a1bb80
x1: fffffd0[ thread pid 0 tid 100064 ]
Stopped at kdb_enter+0x40: undefined d4200000
db> bt
Tracing pid 0 tid 100064 td 0xfffffd0001532a80
db_trace_self() at db_stack_trace+0xec
pc = 0xffff000000613920 lr = 0xffff0000000852c0
sp = 0xffff0000531c6310 fp = 0xffff0000531c6340
db_stack_trace() at db_command+0x224
pc = 0xffff0000000852c0 lr = 0xffff000000084f44
sp = 0xffff0000531c6350 fp = 0xffff0000531c6430
db_command() at db_command_loop+0x60
pc = 0xffff000000084f44 lr = 0xffff000000084d04
sp = 0xffff0000531c6440 fp = 0xffff0000531c6460
db_command_loop() at db_trap+0xf4
pc = 0xffff000000084d04 lr = 0xffff000000087dec
sp = 0xffff0000531c6470 fp = 0xffff0000531c6690
db_trap() at kdb_trap+0x180
pc = 0xffff000000087dec lr = 0xffff0000003687fc
sp = 0xffff0000531c66a0 fp = 0xffff0000531c6700
kdb_trap() at handle_el1h_sync+0x74
pc = 0xffff0000003687fc lr = 0xffff000000615874
sp = 0xffff0000531c6710 fp = 0xffff0000531c6820
handle_el1h_sync() at kdb_enter+0x34
pc = 0xffff000000615874 lr = 0xffff000000367f38
sp = 0xffff0000531c6830 fp = 0xffff0000531c68c0
kdb_enter() at vpanic+0x1a0
pc = 0xffff000000367f38 lr = 0xffff0000003261f8
sp = 0xffff0000531c68d0 fp = 0xffff0000531c6950
vpanic() at panic+0x48
pc = 0xffff0000003261f8 lr = 0xffff000000326054
sp = 0xffff0000531c6960 fp = 0xffff0000531c69e0
panic() at data_abort+0x21c
pc = 0xffff000000326054 lr = 0xffff000000629d10
sp = 0xffff0000531c69f0 fp = 0xffff0000531c6aa0
data_abort() at handle_el1h_sync+0x74
pc = 0xffff000000629d10 lr = 0xffff000000615874
sp = 0xffff0000531c6ab0 fp = 0xffff0000531c6bc0
handle_el1h_sync() at thread_lock_flags_+0x1a8
pc = 0xffff000000615874 lr = 0xffff0000003086c8
sp = 0xffff0000531c6bd0 fp = 0xffff0000531c6cc0
thread_lock_flags_() at statclock_cnt+0x11c
pc = 0xffff0000003086c8 lr = 0xffff0000002c49e0
sp = 0xffff0000531c6cd0 fp = 0xffff0000531c6cf0
statclock_cnt() at handleevents+0x108
pc = 0xffff0000002c49e0 lr = 0xffff00000064b08c
sp = 0xffff0000531c6d00 fp = 0xffff0000531c6d40
handleevents() at timercb+0xe0
pc = 0xffff00000064b08c lr = 0xffff00000064b828
sp = 0xffff0000531c6d50 fp = 0xffff0000531c6dc0
timercb() at arm_tmr_intr+0x5c
pc = 0xffff00000064b828 lr = 0xffff000000601708
sp = 0xffff0000531c6dd0 fp = 0xffff0000531c6dd0
arm_tmr_intr() at intr_event_handle+0x64
pc = 0xffff000000601708 lr = 0xffff0000002ed200
sp = 0xffff0000531c6de0 fp = 0xffff0000531c6e10
intr_event_handle() at intr_isrc_dispatch+0x50
pc = 0xffff0000002ed200 lr = 0xffff00000064dbfc
sp = 0xffff0000531c6e20 fp = 0xffff0000531c6e30
intr_isrc_dispatch() at bcm_lintc_intr+0x190
pc = 0xffff00000064dbfc lr = 0xffff00000061097c
sp = 0xffff0000531c6e40 fp = 0xffff0000531c6ec0
bcm_lintc_intr() at intr_irq_handler+0x60
pc = 0xffff00000061097c lr = 0xffff00000064d9c8
sp = 0xffff0000531c6ed0 fp = 0xffff0000531c6ef0
intr_irq_handler() at handle_el1h_irq+0x70
pc = 0xffff00000064d9c8 lr = 0xffff000000615930
sp = 0xffff0000531c6f00 fp = 0xffff0000531c7010
handle_el1h_irq() at uart_pl011_putc+0x34
pc = 0xffff000000615930 lr = 0xffff00000019dd3c
sp = 0xffff0000531c7020 fp = 0xffff0000531c70c0
uart_pl011_putc() at uart_cnputc+0x94
pc = 0xffff00000019dd3c lr = 0xffff00000019f0c4
sp = 0xffff0000531c70d0 fp = 0xffff0000531c7100
uart_cnputc() at cnputc+0x78
pc = 0xffff00000019f0c4 lr = 0xffff0000002ca264
sp = 0xffff0000531c7110 fp = 0xffff0000531c7140
cnputc() at cnputs+0xb4
pc = 0xffff0000002ca264 lr = 0xffff0000002ca528
sp = 0xffff0000531c7150 fp = 0xffff0000531c7170
cnputs() at putchar+0x158
pc = 0xffff0000002ca528 lr = 0xffff00000036e1f0
sp = 0xffff0000531c7180 fp = 0xffff0000531c7200
putchar() at kvprintf+0xc54
pc = 0xffff00000036e1f0 lr = 0xffff00000036de30
sp = 0xffff0000531c7210 fp = 0xffff0000531c7310
kvprintf() at _vprintf+0x7c
pc = 0xffff00000036de30 lr = 0xffff00000036e7a8
sp = 0xffff0000531c7320 fp = 0xffff0000531c7420
_vprintf() at printf+0x60
pc = 0xffff00000036e7a8 lr = 0xffff00000036e9c4
sp = 0xffff0000531c7430 fp = 0xffff0000531c74d0
printf() at print_registers+0x4c
pc = 0xffff00000036e9c4 lr = 0xffff000000629a94
sp = 0xffff0000531c74e0 fp = 0xffff0000531c7510
print_registers() at data_abort+0x1f0
pc = 0xffff000000629a94 lr = 0xffff000000629ce4
sp = 0xffff0000531c7520 fp = 0xffff0000531c75d0
data_abort() at handle_el1h_sync+0x74
pc = 0xffff000000629ce4 lr = 0xffff000000615874
sp = 0xffff0000531c75e0 fp = 0xffff0000531c76f0
handle_el1h_sync() at tdq_notify+0x28
pc = 0xffff000000615874 lr = 0xffff000000352b04
sp = 0xffff0000531c7700 fp = 0xffff0000531c77a0
tdq_notify() at sched_switch+0x520
pc = 0xffff000000352b04 lr = 0xffff000000350cdc
sp = 0xffff0000531c77b0 fp = 0xffff0000531c7800
sched_switch() at mi_switch+0x118
pc = 0xffff000000350cdc lr = 0xffff000000330220
sp = 0xffff0000531c7810 fp = 0xffff0000531c7830
mi_switch() at taskqgroup_binder+0x74
pc = 0xffff000000330220 lr = 0xffff000000366d60
sp = 0xffff0000531c7840 fp = 0xffff0000531c7860
taskqgroup_binder() at gtaskqueue_run_locked+0x154
pc = 0xffff000000366d60 lr = 0xffff000000366c08
sp = 0xffff0000531c7870 fp = 0xffff0000531c78e0
gtaskqueue_run_locked() at gtaskqueue_thread_loop+0xcc
pc = 0xffff000000366c08 lr = 0xffff0000003667cc
sp = 0xffff0000531c78f0 fp = 0xffff0000531c7910
gtaskqueue_thread_loop() at fork_exit+0x94
pc = 0xffff0000003667cc lr = 0xffff0000002ea004
sp = 0xffff0000531c7920 fp = 0xffff0000531c7950
fork_exit() at fork_trampoline+0x10
pc = 0xffff0000002ea004 lr = 0xffff000000629784
sp = 0xffff0000531c7960 fp = 0x0000000000000000
db>
Any idea what the problem might be?
Best regards
Michael
More information about the freebsd-arm
mailing list