Orange pi one plug network cable after booted ,network will not active

[Daniel Braniss]

> On 15 Dec 2017, at 18:06, Emmanuel Vadot <manu at bidouilliste.com> wrote:
> 
> On Fri, 15 Dec 2017 16:41:56 +0800
> ?? <unto.foru13 at gmail.com <mailto:unto.foru13 at gmail.com>> wrote:
> 
>> Dear all,
>> 
>> I think ,this  maybe is  the problem of u-boot.dtb??
>> 
>> scenario1:plug network cable first then power on,kernel had loaded.
>> network will work well.
>> even if I plug off cable then plug on again .network work well too.
>> 
>> scenario2:network cable not plug till kernel had loaded and  prompt login
>> message.
>> 
>> booting message=>awg0:soft reset timed out
>> 
>> then I plug network cable ,network will not work.
>> ifconfig will not show awg0.
>> /etc/netstart will show => ifconfig: interface awg0 does not exist
>> 
>> blow is my u-boot source
>> https://github.com/evadot/u-boot/tree/freebsd
>> 
>> export CROSS_COMPILE=arm-none-eabi-
>> gmake orangepi_one_defconfig
>> gmake menuconfig
>>     vi .config
>>     CONFIG_API=y
>> gmake
>> 
>> how could I fixed this problem ??
>> thanks all.
> 
> I'll look into it but note that emac (if_awg) isn't in the dts for now
> and only will be when we pull the Liunx 4.15 dts (early january).

that’s great news!!!

> 
> -- 
> Emmanuel Vadot <manu at bidouilliste.com <mailto:manu at bidouilliste.com>> <manu at freebsd.org <mailto:manu at freebsd.org>>
> _______________________________________________
> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"