beaglebone black: MMC partition switch failed

[jungle boogie]

On 04/18/2017 10:30 AM, jungle Boogie wrote:
> On 18 April 2017 at 09:57, Ian Lepore <ian at freebsd.org> wrote:
>> The 20170405 image Glen mentioned works fine, I just DLed and tested
>> it.
>
>
> Thanks for the confirmation, but that means something different is
> happening to my BBB.
>
> I wrote that build to my SD card, put it in the BBB, held down s2,
> powered it up:
>
> U-Boot SPL 2017.01-rc3 (Apr 05 2017 - 05:21:19)
> Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
>
> ** Partition 1 not valid on device 0 **
> spl_register_fat_device: fat register err - -1
> spl_load_image_fat: error reading image u-boot.img, err - -1
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
>
> spl: no partition table found
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
>
> Does this version need to be more recent for it to read data from the SD card?
>

So have I completely broken the BBB somehow?

> Thanks!
>