Can't use mge on 88F5181

[Adrian Chadd]

hiya,

did you figure it out?

Is there something like CRC, etc packet errors or something on RX?



-adrian


On 4 April 2017 at 04:42, Mori Hiroki <yamori813 at yahoo.co.jp> wrote:
> Hi.
>
> I try to use Buffalo WZR-AMPG300NH. This module have 88F5181 and 88E6131.
> I modify dev/mge and dev/etherswitch/e600sw/e6000sw.c.
>
> Network interface mge is detect but not work. Switch port is work by
> port vlan. But CPU connected port3 is nothing trans and receive packet.
>
> I check marvell code but not fix this problem.
>
> If you have advice, please let me know.
>
>
> This is dmesg.
>
> https://gist.github.com/yamori813/ecd5df1b314053a73f310c1122775540
>
>
> Thanks.
>
> Hiroki Mori
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"