[SOLUTION] DB-88F6XXX kernel on 88F6281_A0 (GoFlex Net)

[Jan Sieka]

Great to read such a news!

Best regards,

Jan

2017-04-01 12:06 GMT+02:00 Rasmus Liland <jensrasmus at gmail.com>:

> On 2017-04-01 01:42 +0200, Rasmus Liland wrote:
> >
> > Unable to calculate the addresses myself, I found in U-boot
> > already stated address variables of Linux kernel /boot/uImage and
> > ramdisk /uInitrd to be respecively addr_kern=0x680000, and
> > addr_rd=0x1100000, which is an offset of 5568KiB.
> >
> > As stated earlier, it is possible to load kernel.bin from address
> > 0x600000, perhaps 0x680000 is just enough. Will try this,
> > reporting back in some hours.
>
> GUYS!!!
> IT'S BOOTING!!!
>
> The proper way of booting is:
>
>  · Taking the DOCKSTAR kernel, ripping out the IPSEC_NAT_T to
>    make it compile at all (why this module does not compile on
>    TARGET_ARCH=arm despite being enabled in this stock kernel I
>    do not know)
>
>  · Loading resulting kernel.bin to address 0x1100000, which is
>    the address already defined in $addr_rd to normally load the
>    Linux ramdisk uInitrd
>
> /Rasmus
>