SMP support for Raspberry Pi 3

[Erich Dollansky]

Hi,

this is good news.

Erich


On Tue, 29 Nov 2016 12:55:53 -0800
Oleksandr Tymoshenko <gonzo at bluezbox.com> wrote:

> Hello,
> 
> SMP support for Raspberry Pi 3 is in usable state now. I didn’t run
> any load tests, only checked that all four cores are started on boot.
> 
> Short instruction:
> 
> - Build GENERIC arm64 kernel for your image, not GENERIC-UP
> - Copy https://people.freebsd.org/~gonzo/arm/rpi3-smp/u-boot.bin and
>     https://people.freebsd.org/~gonzo/arm/rpi3-smp/armstub8.bin to FAT
>     partition on SD card.
> - Edit config.txt: change value of device_tree_address parameter:
>     device_tree_address=0x4000
> - Reboot device. It should boot with all four cores enabled and reboot
>     should work too.
> 
> More detailed description of what all these binaries/changes contain
> is in these two posts:
> 
> https://kernelnomicon.org/?p=714
> https://kernelnomicon.org/?p=718
> 
> Please note that FreeBSD/arm64 has been broken by clang 3.9.0 import
> and you will have to update aarch64-binutils to the 2.27_5 to get
> it booting. Details: https://reviews.freebsd.org/D8622
>