aw_thermal breakage on Allwinner H3 SoC

[Milan Obuch]

On Tue, 25 Oct 2016 17:38:55 -0300 (ADT)
Jared McNeill <jmcneill at invisible.ca> wrote:

> On Tue, 25 Oct 2016, Milan Obuch wrote:
> 
> > One more observation: booting verbose shows following
> > aw_thermal0: <Allwinner Thermal Sensor Controller> mem
> > 0x1c25000-0x1c253ff irq 29 on simplebus0 aw_thermal0: #0: alarm 42C
> > hyst 15C shut 65C
> >
> > which is for me wrong - shutdown temperature 65 degrees is
> > unacceptably low.  
> 
> Agreed. Those numbers are the SoC default values.
> 
> It looks like the thresholds should be defined in a thermal-zones
> node in the dts, but there is none defined in sun8i-h3.dtsi. We'll
> have to come up with some reasonable defaults, add them to our dts,
> and then add support for reading the trip points to the aw_thermal
> driver.
> 
> Cheers,
> Jared

How could this get done? Do we have any example (in some other dts) how
this definition should look like? Where do these vaules got read from?

Regards,
Milan