Hummingboard boot hangs in -HEAD

[Tom Sparks]

So rebuilding the kernel in between revs seems to work, so I'm guessing its
toolchain related. I'll do a buildworld to confirm.

On Thu, Feb 18, 2016 at 11:40 AM, Tom Sparks <tom at ycombinator.com> wrote:

> I'd initially thought that it was my build that had failed so I snagged an
> image from ftp.freebsd.org and no, that image fails to boot to multiuser
> as well.
>
>
> Here's where it hangs:
> --- snip ---
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen1.1: <Freescale> at usbus1
> uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus1
> ugen0.1: <Freescale> at usbus0
> uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus0
> hdmi0: i2c transfer failed: 2
> fb0: failed to get EDID info from HDMI framer
> fbd0 on fb0
> VT: initialize with new VT driver "fb".
> uhub0: 1 port with 1 removable, self powered
> --- snip ---
>
> with boot -v I get a bit further:
> --- snip ---
> VT: initialize with new VT driver "fb".
> random: harvesting attach, 8 bytes (4 bits) from fbd0
> uhub0: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub0
> --- snip ---
>
> Then a while later, some other stuff appears:
>
> --- snip ---
> uhub0: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub0
> sdhci_imx0-slot0: Divider 250 for freq 400000 (base 200000000)
> mmc0: Probing bus
> uhub1: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub1
> --- snip ---
>
> Supposition is that this broke in the range of r295351 through r29554.
>
> Anyone?
>
> --
> Tom Sparks
> Systems Engineer
>



-- 
Tom Sparks
Systems Engineer