Hummingboard boot hangs in -HEAD

[Tom Sparks]

I'm gonna rollback to the 1/27 image and then roll forward to see where it
breaks.


On Thu, Feb 18, 2016 at 12:01 PM, Ian Lepore <ian at freebsd.org> wrote:

> The hummingboard (really, all imx6 systems) problem showed up between
>  r295351 - r295543, but I haven't had time to narrow it down more than
> that.
>
> Sata has never worked on imx6.  I had limited success with it 2 years
> ago (it kinda worked but there was data corruption), ran out of time
> and set it aside, and have never gotten back to the driver to finish
> getting it working.
>
> -- Ian
>
> On Thu, 2016-02-18 at 11:57 -0800, Russell Haley wrote:
> > My hummingboard booted two days ago using r294912. The image is here:
> > ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0
> > /FreeBSD-11.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20160127
> > -r294912.img.xz.
> > I was also able to buildworld and buildkernel using whatever head was
> > at the time. I don't have it in front of me to check the revision and
> > I have not replaced the kernel in the image with my fresh build so I
> > can't say if it works.
> >
> > I'm still not able to see my m.2 ssd if anyone is listening and
> > willing to help me.
> >
> > Russ
> >
> > On Thu, Feb 18, 2016 at 11:40 AM, Tom Sparks <tom at ycombinator.com>
> > wrote:
> > > I'd initially thought that it was my build that had failed so I
> > > snagged an
> > > image from ftp.freebsd.org and no, that image fails to boot to
> > > multiuser as
> > > well.
> > >
> > >
> > > Here's where it hangs:
> > > --- snip ---
> > > usbus0: 480Mbps High Speed USB v2.0
> > > usbus1: 480Mbps High Speed USB v2.0
> > > ugen1.1: <Freescale> at usbus1
> > > uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
> > > on usbus1
> > > ugen0.1: <Freescale> at usbus0
> > > uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
> > > on usbus0
> > > hdmi0: i2c transfer failed: 2
> > > fb0: failed to get EDID info from HDMI framer
> > > fbd0 on fb0
> > > VT: initialize with new VT driver "fb".
> > > uhub0: 1 port with 1 removable, self powered
> > > --- snip ---
> > >
> > > with boot -v I get a bit further:
> > > --- snip ---
> > > VT: initialize with new VT driver "fb".
> > > random: harvesting attach, 8 bytes (4 bits) from fbd0
> > > uhub0: 1 port with 1 removable, self powered
> > > random: harvesting attach, 8 bytes (4 bits) from uhub0
> > > --- snip ---
> > >
> > > Then a while later, some other stuff appears:
> > >
> > > --- snip ---
> > > uhub0: 1 port with 1 removable, self powered
> > > random: harvesting attach, 8 bytes (4 bits) from uhub0
> > > sdhci_imx0-slot0: Divider 250 for freq 400000 (base 200000000)
> > > mmc0: Probing bus
> > > uhub1: 1 port with 1 removable, self powered
> > > random: harvesting attach, 8 bytes (4 bits) from uhub1
> > > --- snip ---
> > >
> > > Supposition is that this broke in the range of r295351 through
> > > r29554.
> > >
> > > Anyone?
> > >
> > > --
> > > Tom Sparks
> > > Systems Engineer
> > > _______________________________________________
> > > freebsd-arm at freebsd.org mailing list
> > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > > To unsubscribe, send any mail to "
> > > freebsd-arm-unsubscribe at freebsd.org"
> > _______________________________________________
> > freebsd-arm at freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org
> > "
>



-- 
Tom Sparks
Systems Engineer