SDHC errors during boot on RPi2 (11.0-CURRENT)

[Dan Raymond]

Is anyone else getting these errors during every boot?  I'm running r285346.


sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active 
command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt:  0x00000001
sdhci_bcm0-slot0: Argument: 0x00010000 | Trn mode: 0x0000071b
sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: Caps:     0x00000000 | Max curr: 0x00000001
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active 
command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt:  0x00000001
sdhci_bcm0-slot0: Argument: 0x00010000 | Trn mode: 0x0000071b
sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: Caps:     0x00000000 | Max curr: 0x00000001
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active 
command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt:  0x00000001
sdhci_bcm0-slot0: Argument: 0x00010000 | Trn mode: 0x0000071b
sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: Caps:     0x00000000 | Max curr: 0x00000001
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active 
command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt:  0x00000001
sdhci_bcm0-slot0: Argument: 0x00010000 | Trn mode: 0x0000071b
sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: Caps:     0x00000000 | Max curr: 0x00000001
sdhci_bcm0-slot0: ===========================================
mmc0: CMD7 failed, RESULT: 1
mmcsd0: 31GB <SDHC 00000 1.0 SN B2BB06C3 MFG 08/2014 by 27 SM> at mmc0 
25.0MHz/4bit/65535-block